Add alt code to 1991/ant and format README.md

The alt code will make it a bit less unwieldy for vi(m) users by
changing the following input keys to be like in vi(m):

- Use 0 to go to first column.
- Use $ to go to last column.
- Hit ESC to go back to command mode (instead of form-feed, ctrl-L).
- Use w to go forwards one word.
- Use b to go backwards one word.
- Use q to exit.

The rest of the keys were left unchanged.

Format fix README.md file.

This completes 1991/ant checks unless I'm very much mistaken.

1991/ant/Makefile

@@ -116,8 +116,8 @@ OBJ= ${PROG}.o
 DATA= README.md
 TARGET= ${PROG} hill mole
 #
-ALT_OBJ=
+ALT_OBJ= ${PROG}.alt.o
-ALT_TARGET=
+ALT_TARGET= ${PROG}.alt
 
 
 #################

1991/ant/README.md

@@ -4,6 +4,9 @@
 make all
 ```
 
+There is an [alternate version](#alternate-code) that might feel a bit more
+familiar to vi(m) users.
+
 
 ## To use:
 
@@ -28,6 +31,33 @@ make mole
 ```
 
 
+## Alternate code:
+
+This version changes the commands slightly so that to go to the first column you
+should enter `0`, to go to the last column you should enter `$`, to quit you
+should enter `q`, to go back a word you should enter `b` and to go forwards a
+word you should enter `w`. Also, and perhaps most useful, rather than having to
+hit ctrl-L (form-feed, `\f`) to get back to command mode you can use the usual
+ESC (`\x1b`).
+
+These will make it slightly less unwieldy for those familiar with vi(m); the
+rest was unchanged.
+
+
+### Alternate build:
+
+
+```sh
+make alt
+```
+
+
+### Alternate use:
+
+Use `ant.alt` as you would `ant` above with the changes in the input keys. See
+the author's remarks for the remaining keys.
+
+
 ## Judges' remarks:
 
 The author was kind enough to supply a list of references below,
@@ -38,7 +68,7 @@ of characters you can put a user unfamiliar with vi(m) in a vi(m) session (in
 insert mode) and ask them to exit. Well in this case you're likely to have this
 problem if you ARE a vi(m) user! :-) ... especially if you don't read the
 information below. This means if you're reading this in vi(m) you'll have to
-exit this like in normal vi(m) and then exit `./ant` differently.
+exit this like in normal vi(m) and then try the same with `./ant` only to fail. :-)
 
 NOTE: to enter form feed you should be able to hit `ctrl-L`. This will allow you
 to exit insert mode rather than ESC like in normal vi(m). See the author's
@@ -55,6 +85,7 @@ Carriage return is mapped to newline on input and ignored on output.  Tab stops
 are every eight columns.  Non-printable characters may have unpredictable
 results depending on the implementation of `curses`.
 
+
 ### Commands
 
 -    h j k l	    left, down, up, right cursor movement
@@ -67,6 +98,7 @@ results depending on the implementation of `curses`.
 -    R		    refresh the screen
 -    Q		    quit
 
+
 ### Exit status
 
 -    0		    success
@@ -75,26 +107,26 @@ results depending on the implementation of `curses`.
 
 ### About this entry
 
-The BUF size should be set at compile time to 32767.  This value was used
+The `BUF` size should be set at compile time to 32767.  This value was used
 because the Sozobon C compiler for the Atari ST has 16 bit ints and a limit on
 the size of arrays & structures of 32k.  Also the WatCom C compiler for the PC
 also has 16 bits ints.  On machines that have 32 bit ints (most unix boxes), a
-larger value for BUF could be used.
+larger value for `BUF` could be used.
 
 It is recommend that compact memory model be used on PC class machines.  Small
-memory model may work too provided BUF is not too large.
+memory model may work too provided `BUF` is not too large.
 
 The character constants `'\b'`, `'\f'`, `'\n'`, `'\r'`, `'\t'` are used in order
 to provide more portable code, since the compiler should handle the translation
 of them into the native character set.  Note that `'\f'` (form-feed) was used to
 exit insert mode because K&R C had no escape constant for the escape-key.
 
-My goals for this project were to learn and experiment with the
+My goals for this project were to learn and experiment with the Buffer Gap
-Buffer Gap Scheme [Fin80][net90], write a useful and *portable*
+Scheme [Fin80][net90], write a useful and *portable* program, and meet the
-program, and meet the requirements of the IOCCC.  I initially
+requirements of the IOCCC.  I initially planned to have a mini `curses` built-in
-planned to have a mini `curses` built-in like the IOCCC Tetris entry
+like the [IOCCC Tetris entry from a previous year](/1989/tromp/README.md),
-from a previous year, however this was not as portable as using a
+however this was not as portable as using a `curses` library with
-`curses` library with `TERMINFO`/`TERMCAP` support.
+`TERMINFO`/`TERMCAP` support.
 
 I plan to post follow-ups such as unobfuscated versions and bugs fixes to
 comp.editors.  Reposts of the editor.101, gap.doc, and editor.102 can be found
@@ -103,6 +135,7 @@ in the same group every so often.
 This entry will display a file with long lines, but has trouble scrolling the
 screen with long lines.  Paging up and down should work correctly, however.
 
+
 ### References:
 
 [Fin80]	Craig A. Finseth, "Theory and Practice of Text Editors or\

thanks-for-fixes.md

@@ -1084,6 +1084,21 @@ The alt code did NOT have arg checks added as it is actually a copy of the
 original code.
 
 
+## [1991/ant](1991/ant/ant.c) ([README.md](1991/ant/README.md]))
+
+Cody added [alt code](1991/ant/ant.alt.c) that will be a bit easier to use for
+those familiar with vim in the following ways:
+
+- Use `0` to go to first column.
+- Use `$` to go to last column.
+- Hit ESC to go back to command mode (instead of form-feed, ctrl-L).
+- Use `w` to go forwards one word.
+- Use `b` to go backwards one word.
+- Use `q` to exit.
+
+The other keys were left unchanged.
+
+
 ## [1991/brnstnd](1991/brnstnd/brnstnd.c) ([README.md](1991/brnstnd/README.md]))
 
 Cody fixed this for modern systems. There were two invalid operands to binary