fix experimental web site links in experimental index.html
sync CNAME with https://github.com/ioccc-src/winner/blob/master/CNAME
improve .gitignore files
Added to each .gitignore file, comments on how to sort.
Put into winner .gitignore files, ignore *.dSYM files.
Put into winner .gitignore files, ignore indent.c,
indent.o and indent files. This is done so that the
winner directory can more self contained.
We did not put into winner .gitignore files, however,
excludes of .-files as found in the top level .gitignore file.
As .-files are not allowed by mkiocccentry, the top level
.gitignore file remains sufficient.
Added to year level .gitignore files, excludes of
mkentry or iocccsize files as needed.
Sorted (via sort -d -u) all .gitignore file.
Add .path files to each winner directory: a file containing
the path to the winner directory from the top directory.
Changed YYYY/.year files to contain the paths, from the top
directory, if the winning directories for the given year.
Changed `/.top` to contain the IOCCC years.
Added `make genpath` rule to the top Makefile and the
year Makefiles to generate the above.
Added FAQ 6.8 to `faq.md` to explain the above.
Updated manifest to reflect recent changes to the list of files.
Rather than check if $(CC) IS gcc or IS clang check for $(CC) containing
gcc or clang. This is because in some systems or conditions the compiler
might not be called JUST gcc or JUST clang. For instance gcc in MacPorts
is called gcc-mp-13 (for example) but without this change one would have
to symlink gcc to gcc-mp-13 or copy it to gcc.
The FAQ has been updated to address this.
Due to GitHub not serving nor rendering HTML files whose filename
starts with "." (dot), we renamed `.inventory.html` to `inventory.html`.
Renamed: `tmp/gen_dot_winner.sh` -> `tmp/gen_winner_json.sh`
Fixed URL generation for GitHub links in `inventory.html`.
The manifest was updated accordingly.
The `tmp/README.md` file was updated accordingly.
Fixed an incorrect author win for "1989_jar.2" in `author_wins.numbers`
and `author_wins.csv`.
Changed winner_JSON_format_version to "0.5 2023-11-04".
Added `gen_dot_winner.sh` tool to generate .winner.json and .inventory.html
for a winner. This tool uses [pandoc](https://pandoc.org) to convert
markdown to HTML.
Used this command to generate `.winner.json` and `.inventory.html` for
all winners:
```sh
./run_all.sh -v 1 -D 1 ./gen_dot_winner.sh
```
Updated `tmp/README.md` to reflect the above.
Retired "fake.gen_inventory.sh" to `tmp/OLD_manifest/fake.gen_inventory.sh`.
Added `-D level` flag to `run_all.sh` to specify the `-v level` for
the tool that is being run.
As requested on GitHub: a tool that will be written, readme2index, will,
as explained:
'... will take the converted HTML from the README.md markdown and
inject it into an HTML template. Things such title, award one and
author information will be injected into the HTML page ahead of the
HTML that was converted from the README.md markdown. Without going
into details of HOW at this time, the result will be a coherent HTML
index.html page with the winner title / award, winning author
information, and important file links come from other sources and
NOT from the README.md file.
The text from the 1st award line, thru the authorship information,
and up to but not including the "## To build:" line in the README.md
file will just get in the way. Moreover authors might be tempted to
try and maintain that top of README.md text instead of working with
the author/_author_handle_.json and winner .winner.json files.
This was done with my[0] sgit(1) (https://github.com/xexyl/sgit) tool like:
sgit -o -n -e '/^## To build:/,$p' '[12][0-9][0-9][0-9]/*/README.md'
[0] Is that shameless self-promotion? I don't know but I don't care: it
is generally a very useful tool and has been used in other repos too.
Besides, I've done it many times before and it's a great example that I
will be adding to the README.md file of the tool, one I hadn't thought
of doing.
The `.id` files are no longer needed and so they were removed.
The `winner_id` (the contents of the `.id` files) are simply
a concatenation of "year" and "_" and "dir".
Adjusted `.inventory.html`, `tmp/README.md`,
`tmp/fake.gen_inventory.sh`, and the manifest according
to the above.
The new tool, tmp/fake.gen_inventory.sh, now adds
a fake .inventory.html file to each winner entry.
Once the winner2nventory tool is written, the .inventory.html
will contain links to all winner files listed in the inventory.
For now, the tmp/fake.gen_inventory.sh tool just creates
a placeholder file.
As the 'Alternate code' and 'Original code' heading level is now 2 the
'To build' and 'To use' subsections should be level 3, not 4, and also
reworded, this was done:
sgit -e 's/^#### To build/### Alternate build/g' -e 's/^#### To use/### Alternate use/g' '*README.md'
Many more have to be updated and this will be done manually at another
time.
Change level 3 (###) to level 2 (##):
sgit -e 's/^### \(Alternate code\)/## \1/g' '*README.md'
which is the same as:
sgit -e 's/^### Alternate code/## Alternate code/g' '*README.md'
This is per discussion in GitHub.
As in:
sgit -e 's/# To run/# To use/g' '*README.md'
This makes consistent the message for how to use the program. 'How to
use' was chosen because one can run a program just by doing './foo' but
that doesn't imply that's how to use it but the purpose of the section
is how to use it.
We now have 6 diff rules:
diff_orig_prog
diff_prog_orig
diff_alt_prog
diff_prog_alt
diff_orig_alt
diff_alt_orig
The FAQ for these diffs needs to be updated
as we have 6 types of diffs now.
This is done so that I can provide another thing I forgot to mention in
the previous log. I fixed the scripts to not have the ill-famed useless
use of cat. Why is it ill-famed?
Because there's no such thing as a useless cat, that's why! In fact the
fact they exist proves that the Earth is NOT flat: if it was flat they
would have knocked everything off it by now! :-) Besides, they offer all
us ailurophiles hours and hours and years and years of joy and fun and
companionship. And contrary to popular belief, they most certainly do
have a personality and they can be very sociable.
There were some things unclear in the README.md file that have now been
corrected.
Clarified in the README.md that running make clobber all will run the
program itself.
The make alt target now runs the alt code just like the entry itself.
This is fine because it is a simulation (to avoid annoyance of writing
binary data to /dev/tty) and since one may still run the program or
script directly it's fine.
The alternate code section in the README.md was cleaned up and formatted
as well.
This is not complete as some things are not clear to me at this time. I
just fixed some things that could be fixed without looking over the full
file, just updating what was immediately noticed.
There was a comment in the form of:
... the liked/allowed ...
which should instead be:
... liked/allowed ...
and this was fixed with my sgit tool like:
sgit -e 's,the \(liked/allowed or compile\),\1,g' '*Makefile'
With the make indent rule there was a typo for indent as 'intent'. This
was fixed with my sgit tool like:
sgit -e 's/no intent\( tool found\)/no indent\1/g' '*Makefile'
This is a HUGE commit:
417 files changed, 874 insertions(+), 874 deletions(-)
As the IOCCC website now is https enabled I have updated the
'http://www.ioccc' to 'https://www.ioccc'.
There was also a typo in Makefiles where it said 'for VERY WELCOME' when
it should be 'are VERY WELCOME'.
Finally slashdot.org is also https enabled so references to
'http://slashdot' were changed to 'https://slashdot'.
This was done by my sgit tool (see https://github.com/xexyl/sgit)
like:
sgit -e 's,http://www.ioccc,https://www.ioccc,g' -e 's/for VERY WELCOME/are VERY WELCOME/g' -e .
but because I didn't have a list of files that should be modified I had
to be careful which files to commit as I had files that were changed but
not ready to be committed. Since I did it in steps, finding typos as I
went along, I actually ran sgit three times but to simplify the above
(and to show that it's possible to do more than one sed command) I made
it all as one. Since I did not have a list of files ahead of time I had
to determine what files to commit, first going through them like:
for j in $(for i in $(git status|grep modified|cut -d: -f2); do \
git grep 'https://www.ioccc' "$i"; done|cut -d: -f1|sort|uniq); \
do git diff "$j"; done|less -r
(I had to pipe through less because of a strange problem with the git
diff which appears to be because of a terminal problem maybe due to the
command above but it was all I could come up with in a very tired head.)
The above and
git status | grep modified:
showed that some C files had been modified which obviously should not be
done so I had to do:
git co '*c'
to undo those changes.
Finally to commit the correct files I did:
for i in $(git status|grep modified|cut -d: -f2); do \
git grep -E 'https://www.ioccc|https://slashdot|are VERY WELCOME' "$i"; \
done |cut -d: -f1|sort|uniq|xargs git commit -v
or so (with any formatting issues or typos here due to typos in the log
due to the terminal (in)sanity issue described).
This is to make it more standard which further allows one to run make on
some other source code, say because they want to try and fix an entry
but forget to update the Makefile. Or if they're the author they can not
worry about it in some cases. But since LDFLAGS is the standard way it
seems better to have the LIBS variable in the Makefile be LDFLAGS.
Maybe there is a reason to not have this and I'm happy to close this in
that case but it does seem better this way so I'm doing this commit.
Instead of writing the literal output of the binary to /dev/tty,
we simulate the output by silencing stderr and by piping the binary
thru strings.
The raw binary executable output to /dev/tty was capable "ill effects".
Such "ill effects" could be as mild as printing strange characters, to
beeping (sometimes for extended periods), and even the termination
of the terminal app window in some cases.
The "ill effects" from the printing of the raw binary executable
is highly dependent on the compiler, compiler version, libc, crt0.o,
operating system, terminal app and/or terminal driver. As such,
the "ill effects" that one user might see may be hard to reproduce
in order environments. While some of the more extreme "ill effects"
might be unlikely, what was more common was for the binary output
to be interpreted strangely by the terminal app and/or driver to
the extent that the was lost or not well seen by the user.
This change introduces the ${STRINGS} Makefile variable to the
`/var/mk` file and uses to to "clean out" any output that might
produce such "ill effects". Prior to the command, the echo does
clearly state:
```
NOTE: We will now simulate: cc -c -o /dev/tty jar.1.c
```
We also modify the `1989/jar.1/jar.1.sh` and `1989/jar.1/jar.1.alt.sh'
shell scripts to pipe raw binary through strings as well.
Thus the user can, if they wish, try the raw command themselves.
If that command does produce the more extreme examples of "ill
effects", the fault rests with the user. We mention that the
Makefile will echo the command to stdout in the `README.md`. But
that is as far as we go. We do **NOT RECOMMEND** having a shell
script or Makefile rule that would write the raw binary to `/dev/tty`
but rather let the immigration of the user try or not try it.
In general, the use piping raw binary thru stings makes the original
output more apparent, as was the case when using dumb CRT terminals
that couldn't even process ANSI escape sequences were more common.
Due to the fact we now have .orig.c files and thus the possibility of
winner.orig or prog.orig being built I have updated all the .gitignore
files so that these files ignored. This was done with the following
shell commands, for reference:
for i in $(find 19* 200* 201[0123] -mindepth 2 -maxdepth 2 -name .gitignore) ; do echo $(dirname "$i"|sed -e 's,[0-9]\{4\}/,,g').orig >> "$i"; done
for i in $(find 201[4-9] 2020 -mindepth 2 -maxdepth 2 -name .gitignore) ; do echo prog.orig >> "$i"; done
and the two commands is because it was only in 2014 that the winning
entries were renamed to prog so prog.orig is the correct glob.
There were many many README.md files with the wrong heading level for
different sections. These have been changed.
To help go through the changes it should be noted I used sgit and also
here is what is changed:
The 'Try', 'To build' and 'To run' lines have two '#'s. Some had one and
others had three.
An exception is that in 1984/anonymous/README.md for the alternative
code that had three '#'s. This is not consistent yet and it might be
that only two are desired. But for now that one at least has three.
Cody Boone Ferguson