Instead of code blocks the bug / (mis)features statuses are quoted
rather than in a code block. In the case that there is more than one a
line break was added at the end of all but the last one.
A bug status was renamed to be slightly more correct (maybe more than
one was renamed for the same purpose but at least one was).
The bug statuses in the quotes are now bold to let them stand out
better.
In the line in README.md and index.html files that said:
### NOTICE to those who wish for a greater challenge
I added a ':' at the end of the line.
There were some entries that had a link fix in the index.html file but I
only looked up through 1995/leo as those still have to have a 'look and
feel' check and it would just slow things down.
We add the following level-3 header to help people identify text
they may wish to skip if they wish for a greater challenge:
```
```
After that notice we add:
```
**If you want a greater challenge, don't read any further**:
just try to understand the program via the source.
If you get stuck, come back and read below for additional hints and information.
```
And sometimes follow with:
```
```
Or sometimes follow with:
```
```
Where the alt code impacts a "greater challenge", we add instead:
```
**If you want a greater challenge, don't read any further**:
just try to understand the program without looking at the Alternate code.
If you get stuck, come back and look at the Alternate code.
```
And where a given command impacts a "greater challenge", we add instead:
```
**If you want a greater challenge, don't read any further**:
just try to understand the program without running the command below.
If you get stuck, come back and run the following command:
```
Perform `make www` to perform the above and test under macOS.
In most cases the word was changed to 'obfuscation' as it was about
obfuscation, not deobfuscation. In some cases like 1995/leo since the
file was (in 1995/leo) about a secret switch it was changed to
'secret.md' (and 'secret.html') but there were others like that as well.
One entry had the words 'spoiling the size rule' but this had been
changed to 'deobfuscating the size rule' which was obviously wrong.
In the latter YYYY/README.md files the judges had written after some
entries (brief summaries) '...
...We'll stop spouting spoilers now. Have fun exploring all the
entries!
but that was changed to:
...We'll stop spouting deobfuscation information now. Have fun
exploring all the entries!
which wasn't really about deobfuscation but just a brief summary of what
the entries did.
And in the most problematic case (at least for me :-), 2018/ferguson) I
had put a joke in:
... but it's the only Easter egg I won't spoil
but it was changed to 'won't deobfuscate' which not only is not what it
is but it spoilt the joke.
In some cases the word was changed back to 'SPOILER' (or similar) but in
most cases not. I believe it should be better now. There are some
caveats, however, as below.
Although make find_missing_links is okay I do not remember if this will
catch links that refer to '%%REPO_URL%%' or other pandoc tokens. This
means I might have to go back to some earlier years to verify links are
okay. That should not take that much time I hope.
It might also be that some wording can still be improved some but it is
hoped this will be discovered when checking links and looking over the
manifest (which obviously changed).
While not strictly necessary, replacing the two ASCII tab characters
in the markdown copyright comment makes it easier to detect problematic
TAB indentation within markdown files.
After this commit, only 90 markdown files have leading ASCII TAB
characters. And again, while not strictly necessary, we can consider
running expand on those 90 markdown files to see what effect that
might have on the HTML files they produce.
Replace leading ASCII TAB characters with multiples of 8 ASCII SPACE
characters (the default action of the `expand(1)` tool) might have
an negative effect on some HTML formatting where **hack-a-round**
formatting was attempted to fix broken indentation caused by
problematic ASCII TAB characters.
Think of this as a baseline for evaluating leading
TAB characters within markdown files.
TODO: Consider either using `expand(1)` to replace leading ASCII
TAB characters with multiples of 8 ASCII SPACE characters AND/OR
modifying the appropriate `bin` tool to convert leading ASCII TAB
characters into multiples of 8 ASCII SPACE characters.
In other words rather than have the link name in the form of:
1984 decot bugs
it is now:
1984/decot in bugs.html
so that it matches how the entry itself looks (as in how it's
identified) and to say where (what file) it is (in). The reason it says
'in bugs.html' rather than 'bugs' (saying that the entry has bugs) is
because not all are bugs and it's saying where to see it anyway. But
some are features, others are missing links or files or other things
like that and to keep the same form it now says 'in bugs.html'.
This was done with my sgit(1) tool like:
sgit -e 's,\([0-9][0-9][0-9][0-9]\) \([-a-z\.0-9]*\) bugs,\1/\2 in bugs.html,g' '*/*md'
The link to bugs.html itself has the path '../../bugs.html'. This is
important as it's meant to be rendered in the browser. At first this was
not remembered and I did something like:
sgit -e 's,\[\([0-9][0-9][0-9][0-9]\) \([-a-z\.0-9]*\) bugs\](../../bugs.html,\[\1/\2 in bugs.html\](%%REPO_URL%%/bugs.html,g' '*/*md'
but this was changed to the simpler one due to the problem described
above. It's worth putting this note here as a reminder, though, so I
have included it here.
We added a space between the markdown triple code mark
and language that was enclosed in HTML comments.
So a line of the form:
````
```<!---c--->
````
became:
````
``` <!---c--->
````
This was done to **help** some code see that the HTML comment
string was not a markdown code specifier. Not all code
understands this after this changed. For example, `pandoc(1)`
still forms HTML classes of the form "<!---c-->"
when it encounters the above mentioned change.
We also fixed a problem with `2019/dogon/README.md` regarding
a markdown code block.
We also fixed a problem with `2020/yang/README.md` regarding
a markdown code block.
When language is specified in a markdown code block such as:
````
```c
printf("Hello, world!\n");
```
````
is used, the resulting HTML as produced by `pandoc(1)` combined
with our revised `ioccc.css` is not intent the code block well.
A temporary "_hack-a-round_" is to turn the "markdown code language
specifier" into an HTML comment. For example:
````
```<!---c-->
printf("Hello, world!\n");
```
````
This commits turns off existing markdown code language specifiers
for now, while preserving our ability to restore them in the future
when a better "_hack-a-round_" to the "markdown code language
specifier" problem is found.
The HTML impact if this "_hack-a-round_" is to produce HTML that
looks like this:
```
<pre class="<!---c-->"><code> .. </code></pre>
```
We might be able to create a complex set of classes for each markdown
code language (there won't be very many) in `ioccc.css`, or we might
find a more general CSS (or maybe `pandoc(1)`?) solution.
For now, this hack-a-round will have to do.
All code blocks in markdown have been intended by at least 4 spaces.
We add `--tab-stop=8` to all `pandoc(1)` executions in order to set
a better tab stop indentation, especially for tab intended code blocks.
Changed `bin/pandoc-wrapper.sh` VERSION from "1.5.3 2024-03-26"
to "1.6 2024-03-31".
Fixed `1991/brnstnd/sorta.README.md` so that the sorta code
is code blocks.
Removed unneeded paragraph group in copyright in `inc/footer.default.html`.
Fixed excess whitespace after list Author on entry `index.html` page.
Changed `bin/output-index-author.sh` VERSION from "1.5.2 2024-03-26"
to "1.6 2024-03-31".
Performed `make www` to perform the above and test under macOS.
TODO: Fix the problem of the initial line of code being extra intended.
TODO: Fix excess whitespace around code that is inline.
The inc/footer.default.html now has a common Copyright and CC BY-SA
4.0 License section for all generated HTML files.
All markdown files have a similar Copyright and CC
at the bottom in the form of an HTML comment.
Entry source is now prog.c for IOCCC years 2014 thru 2020,
or is now dirname.c IOCCC years 1984 thru 2013.
To achieve this state, we renamed the following:
renamed: 2004/hibachi/src/hibachi.c -> 2004/hibachi/hibachi.c
renamed: 2012/omoikane/nyaruko.alt.c -> 2012/omoikane/omoikane.alt.c
renamed: 2012/omoikane/nyaruko.alt2.c -> 2012/omoikane/omoikane.alt2.c
renamed: 2012/omoikane/nyaruko.c -> 2012/omoikane/omoikane.c
renamed: 2012/omoikane/nyaruko.orig.c -> 2012/omoikane/omoikane.orig.c
Modified `bin/subst.entry-index.sh` to add to entry `index.html` file,
links to the `Makefile` and the _C code_ to the top navigation bar.
Changed `bin/subst.entry-index.sh` VERSION from "1.2.2 2024-02-25"
to "1.3 2024-03-02".
Moved printing the Inventory link in the top navigation bar
from `bin/subst.entry-navbar.awk` to `bin/subst.entry-index.sh`.
Changed `bin/subst.entry-navbar.awk` VERSION from "1.0.1 2024-02-23"
to "1.1 2024-03-02".
Moved printing the Inventory link in the top navigation bar
from `bin/subst.year-navbar.awk` to `bin/subst.year-index.sh`.
Changed `bin/subst.year-index.sh` VERSION from "1.0 2024-02-11"
to "1.1 2024-03-02".
Changed `bin/subst.year-navbar.awk` VERSION from "1.0 2024-02-11"
to "1.1 2024-03-02".
Added location names (both default and common) to `author.html`.
Changed `tmp/gen_author_json.sh` VERSION from "1.0 2023-06-06"
to "1.1 2024-03-04".
Added location names (both default and common) to `author.html`.
Changed `bin/gen-authors.sh` VERSION from "1.2 2024-03-09"
to "1.3 2024-03-04".
The manifest and the resulting `.entry.json` files have been changed
for `2004/hibachi` and `2012/omoikane`.
The Makefiles for `2004/hibachi` and `2012/omoikane` copy the
source file into the "previously used location". The `make clobber`
rule removes the copied source. The `.gitignore` files have been
updated accordingly.
Improved how the concept of IOCCC terms _entry_, _author_ and _submission_ are
used in markdown files.
Links to markdown files (files ending in .md) within the repo were
changed to link to HTML files (files ending in .html). Special cases
where `README.md` became `index.html` were modified accordingly.
Fixed URL for `bugs.html` in Makefile comments.
Fixed name of `bin/sgi.sh` referenced in comments in `.gitignore` files.
Links to locations within the repo are now relative. For example a
link to `/contact.html` may become `../contact.html' or '../../contact.html`
depending on the directory level of the markdown file.
Nearly all links with absolute URLs under _https://www.ioccc.org_
or `https://ioccc-src.github.io/temp-test-ioccc_ have been changed to
relative paths within the repo. Some exceptions to this (such as
referring to a GitHub repo) were preserved.
Fixed a number of inside `faq.md` and `bugs.md`.
Added HTML name tags (in the form of an _entry_id_) for each entry
referenced in `bugs.md`. Fixed links from outside of `bugs.html`
into `bugs.html` accordingly.
Where FAQ entries are referenced, a named tag is used so that if a
FAQ is ever renumbered, links outside of `faq.html` will still work.
Changed the _inventory_order_ of a compressed tarball from _300_
to _100000_. While this may have been done for the manifest,
this changed had not yet been propagated into the `.entry.json` files.
Links to web sites that were in the for <URL> are now [URL](URL).
Performed `name www` to process all of the above.
Improved format of `authors.html`. Full names are now bold.
Location codes are now links back into `location.html` and
location names (both default and common) are now italics.
Added _author_handle_ each author.
Changed `bin/gen-authors.sh` VERSION from "1.1 2024-02-25"
to "1.2 2024-03-09".
Improved format of `location.html` as location codes are now bold,
author counts in a given location are now bold, and location names
(both default and common) are now italics.
Changed `bin/gen-location.sh` VERSION from "1.0.1 2024-02-23"
to "1.1 2024-03-04".
Added italic location name after location code in entry
`index.html` files.
Changed `bin/output-index-author.sh` VERSION from "1.4.1 2024-02-23"
to "1.5 2024-03-04".
Added _Location of authors_ to the sidebar as a link to `location.html`.
TODO: While nearly all of the above mentioned changes are likely correct,
they likely introduced a few errors that need correcting.
The try.sh script runs the commands in the try section. It does not run
the spoiler command in the judges' remarks as that didn't feel like a
good idea.
The README.md has been typo and format checked.
Added to bugs.md to try and change to use fgets(3). In the meantime it
uses 2>/dev/null.
As requested on GitHub: a tool that will be written, readme2index, will,
as explained:
'... will take the converted HTML from the README.md markdown and
inject it into an HTML template. Things such title, award one and
author information will be injected into the HTML page ahead of the
HTML that was converted from the README.md markdown. Without going
into details of HOW at this time, the result will be a coherent HTML
index.html page with the winner title / award, winning author
information, and important file links come from other sources and
NOT from the README.md file.
The text from the 1st award line, thru the authorship information,
and up to but not including the "## To build:" line in the README.md
file will just get in the way. Moreover authors might be tempted to
try and maintain that top of README.md text instead of working with
the author/_author_handle_.json and winner .winner.json files.
This was done with my[0] sgit(1) (https://github.com/xexyl/sgit) tool like:
sgit -o -n -e '/^## To build:/,$p' '[12][0-9][0-9][0-9]/*/README.md'
[0] Is that shameless self-promotion? I don't know but I don't care: it
is generally a very useful tool and has been used in other repos too.
Besides, I've done it many times before and it's a great example that I
will be adding to the README.md file of the tool, one I hadn't thought
of doing.
As in:
sgit -e 's/# To run/# To use/g' '*README.md'
This makes consistent the message for how to use the program. 'How to
use' was chosen because one can run a program just by doing './foo' but
that doesn't imply that's how to use it but the purpose of the section
is how to use it.
The use of the markdown trailing whitespace to indicate
line break should NOT be done when the following line is empty.
This removes such improper use of whitespace in README.md files.
This to make the country code consistent with mkiocccentry (and I guess
international standard country codes).
This affects many README.md files and (for one line) winners.csv.
There were many many README.md files with the wrong heading level for
different sections. These have been changed.
To help go through the changes it should be noted I used sgit and also
here is what is changed:
The 'Try', 'To build' and 'To run' lines have two '#'s. Some had one and
others had three.
An exception is that in 1984/anonymous/README.md for the alternative
code that had three '#'s. This is not consistent yet and it might be
that only two are desired. But for now that one at least has three.
Update the README.md files - at least with those not in a previous
commit. The updates mostly include formatting (make them markdown) but
probably also typos here and there. More probably has to be done with
these files.
The 1996/august/.gitignore was updated as well with a file that is
generated by one of the suggested commands.
These are mostly just formatting fixes but there might be some typos
here and there.
These years have not been checked thoroughly but I made fixes and want
them in for when I do work on them.
As far as the Makefiles go: notes were added that correspond to the
notes in the README.md files which is why I have put them in the same
commit.
There is one exception:
$ find . -name '*.hint' -execdir git mv '{}' README.md \;
git statufatal: destination exists, source=1992/albert/albert.hint, destination=1992/albert/README.md
Looking at the two files they differ quite a bit so I've not changed it.
I'll bring this up on GitHub.
Cody Boone Ferguson