While not strictly necessary, replacing the two ASCII tab characters
in the markdown copyright comment makes it easier to detect problematic
TAB indentation within markdown files.
After this commit, only 90 markdown files have leading ASCII TAB
characters. And again, while not strictly necessary, we can consider
running expand on those 90 markdown files to see what effect that
might have on the HTML files they produce.
Replace leading ASCII TAB characters with multiples of 8 ASCII SPACE
characters (the default action of the `expand(1)` tool) might have
an negative effect on some HTML formatting where **hack-a-round**
formatting was attempted to fix broken indentation caused by
problematic ASCII TAB characters.
Think of this as a baseline for evaluating leading
TAB characters within markdown files.
TODO: Consider either using `expand(1)` to replace leading ASCII
TAB characters with multiples of 8 ASCII SPACE characters AND/OR
modifying the appropriate `bin` tool to convert leading ASCII TAB
characters into multiples of 8 ASCII SPACE characters.
We fix more markdown links in markdown files that refer to files
internally to the web site.
Added tmp tools to find and print various markdown links:
* `tmp/md-links.sh` - print all markdown links
* `tmp/md-token-links.sh` - print all markdown links that start with a **%%TOKEN%%**
* `tmp/md-local-links.sh` - print all markdown links to a local file
* `tmp/md-link-paths.sh` - print local file paths referenced in markdown links
Fixed a number of markdown formatting problems with `thanks-for-help.md`.
Fixed markdown links to files in `thanks-for-help.md`. Improved
heading levels in `thanks-for-help.md`, and made entry sections consistent.
Changed all markdown links that end in "))" to end in a better way.
Explained in `markdown.md` why we are avoiding markdown links that
end in "))".
Ran `make www` to perform the above.
TODO: Fix stuff we broke by mistake doing the above.
TODO: Fix more broken markdown links.
We added a space between the markdown triple code mark
and language that was enclosed in HTML comments.
So a line of the form:
````
```<!---c--->
````
became:
````
``` <!---c--->
````
This was done to **help** some code see that the HTML comment
string was not a markdown code specifier. Not all code
understands this after this changed. For example, `pandoc(1)`
still forms HTML classes of the form "<!---c-->"
when it encounters the above mentioned change.
We also fixed a problem with `2019/dogon/README.md` regarding
a markdown code block.
We also fixed a problem with `2020/yang/README.md` regarding
a markdown code block.
When language is specified in a markdown code block such as:
````
```c
printf("Hello, world!\n");
```
````
is used, the resulting HTML as produced by `pandoc(1)` combined
with our revised `ioccc.css` is not intent the code block well.
A temporary "_hack-a-round_" is to turn the "markdown code language
specifier" into an HTML comment. For example:
````
```<!---c-->
printf("Hello, world!\n");
```
````
This commits turns off existing markdown code language specifiers
for now, while preserving our ability to restore them in the future
when a better "_hack-a-round_" to the "markdown code language
specifier" problem is found.
The HTML impact if this "_hack-a-round_" is to produce HTML that
looks like this:
```
<pre class="<!---c-->"><code> .. </code></pre>
```
We might be able to create a complex set of classes for each markdown
code language (there won't be very many) in `ioccc.css`, or we might
find a more general CSS (or maybe `pandoc(1)`?) solution.
For now, this hack-a-round will have to do.
All code blocks in markdown have been intended by at least 4 spaces.
We add `--tab-stop=8` to all `pandoc(1)` executions in order to set
a better tab stop indentation, especially for tab intended code blocks.
Changed `bin/pandoc-wrapper.sh` VERSION from "1.5.3 2024-03-26"
to "1.6 2024-03-31".
Fixed `1991/brnstnd/sorta.README.md` so that the sorta code
is code blocks.
Removed unneeded paragraph group in copyright in `inc/footer.default.html`.
Fixed excess whitespace after list Author on entry `index.html` page.
Changed `bin/output-index-author.sh` VERSION from "1.5.2 2024-03-26"
to "1.6 2024-03-31".
Performed `make www` to perform the above and test under macOS.
TODO: Fix the problem of the initial line of code being extra intended.
TODO: Fix excess whitespace around code that is inline.
The inc/footer.default.html now has a common Copyright and CC BY-SA
4.0 License section for all generated HTML files.
All markdown files have a similar Copyright and CC
at the bottom in the form of an HTML comment.
The 'to use' section was fixed also: it's not just specific gzipped
files but any so it now says 'file.gz' and adds that file.gz is any
gzipped file.
The try.sh script now has the command that used to be in to use and also
what was in the try section. It also copies rcm.c to rcm.cp.c and gzips
that file and then runs the program on that to show the source. All
paged through less(1), of course. Finally it does what the judges have
in their comments (which have been updated to say that the command is in
the try.sh script). The judges' command is naturally a shorter way to do
the one added in the try.sh script but it uses tee(1) to write both to
another file (piped to less(1)) so that it can compare the two.
Obviously the files will be the same but it shows how it works in
multiple ways.
As requested on GitHub: a tool that will be written, readme2index, will,
as explained:
'... will take the converted HTML from the README.md markdown and
inject it into an HTML template. Things such title, award one and
author information will be injected into the HTML page ahead of the
HTML that was converted from the README.md markdown. Without going
into details of HOW at this time, the result will be a coherent HTML
index.html page with the winner title / award, winning author
information, and important file links come from other sources and
NOT from the README.md file.
The text from the 1st award line, thru the authorship information,
and up to but not including the "## To build:" line in the README.md
file will just get in the way. Moreover authors might be tempted to
try and maintain that top of README.md text instead of working with
the author/_author_handle_.json and winner .winner.json files.
This was done with my[0] sgit(1) (https://github.com/xexyl/sgit) tool like:
sgit -o -n -e '/^## To build:/,$p' '[12][0-9][0-9][0-9]/*/README.md'
[0] Is that shameless self-promotion? I don't know but I don't care: it
is generally a very useful tool and has been used in other repos too.
Besides, I've done it many times before and it's a great example that I
will be adding to the README.md file of the tool, one I hadn't thought
of doing.
Fixed cases where there was a bad trailing backslash.
Improved a few cases where a code block was needed
to highlight some text.
Changed a few cases where a code block needed to
declared as, say, a sh code block.
Fixed a few cases where the winner information was not properly formatted.
Plus a few nits and clarifying text was added.
As in:
sgit -e 's/# To run/# To use/g' '*README.md'
This makes consistent the message for how to use the program. 'How to
use' was chosen because one can run a program just by doing './foo' but
that doesn't imply that's how to use it but the purpose of the section
is how to use it.
The use of the markdown trailing whitespace to indicate
line break should NOT be done when the following line is empty.
This removes such improper use of whitespace in README.md files.
This to make the country code consistent with mkiocccentry (and I guess
international standard country codes).
This affects many README.md files and (for one line) winners.csv.
I feel positively awful but I also felt I had to add a link to the emacs
tarball that was referenced in the README.md file. No matter how much it
goes against my DNA it felt like it should be at least linked to since
it was part of the author's testing procedure. Call me crazy but I just
prefer not having CTS, I already have a good OS and I'd like a good
editor too. :-)
There were many many README.md files with the wrong heading level for
different sections. These have been changed.
To help go through the changes it should be noted I used sgit and also
here is what is changed:
The 'Try', 'To build' and 'To run' lines have two '#'s. Some had one and
others had three.
An exception is that in 1984/anonymous/README.md for the alternative
code that had three '#'s. This is not consistent yet and it might be
that only two are desired. But for now that one at least has three.
Update the README.md files - at least with those not in a previous
commit. The updates mostly include formatting (make them markdown) but
probably also typos here and there. More probably has to be done with
these files.
The 1996/august/.gitignore was updated as well with a file that is
generated by one of the suggested commands.
These are mostly just formatting fixes but there might be some typos
here and there.
These years have not been checked thoroughly but I made fixes and want
them in for when I do work on them.
As far as the Makefiles go: notes were added that correspond to the
notes in the README.md files which is why I have put them in the same
commit.
There is one exception:
$ find . -name '*.hint' -execdir git mv '{}' README.md \;
git statufatal: destination exists, source=1992/albert/albert.hint, destination=1992/albert/README.md
Looking at the two files they differ quite a bit so I've not changed it.
I'll bring this up on GitHub.
Cody Boone Ferguson