Some bug statuses have been changed so the bugs file was also updated
(some removed, some added).
The manifest of 2004/hibachi was fixed some.
The alt_url of 2004/gavare was fixed which required a rebuild of
authors.html.
For 2004/gavin a proper link to QEMU was added. It strikes me as it
possibly being a good idea to have an FAQ about QEMU (as it is not just
2004/gavin that might benefit from it) but I don't know and in any case
I have zero experience with it.
The entries 2004/gavare, 2004/gavin and 2004/hibachi have been checked
for format / display issues. This would suggest that the next entry to
look at is 2004/hoyle.
Amongst the changes here is that we do not need to have the hex or html
code (numbers) for open and close parentheses (in links) as there are
names. '(' is & followed by lpar; and the ')' is the same but 'rpar;'
instead. This makes it easier to remember and type and it generates the
same html as well (they are all valid). Now the markdown files are
consistent in this (in some cases hex was used and in others the html
code).
Although many markdown files were updated no html files needed to be
updated as it generates the same html. Even so I ran the appropriate
rules to do so just to verify this.
While not strictly necessary, replacing the two ASCII tab characters
in the markdown copyright comment makes it easier to detect problematic
TAB indentation within markdown files.
After this commit, only 90 markdown files have leading ASCII TAB
characters. And again, while not strictly necessary, we can consider
running expand on those 90 markdown files to see what effect that
might have on the HTML files they produce.
Replace leading ASCII TAB characters with multiples of 8 ASCII SPACE
characters (the default action of the `expand(1)` tool) might have
an negative effect on some HTML formatting where **hack-a-round**
formatting was attempted to fix broken indentation caused by
problematic ASCII TAB characters.
Think of this as a baseline for evaluating leading
TAB characters within markdown files.
TODO: Consider either using `expand(1)` to replace leading ASCII
TAB characters with multiples of 8 ASCII SPACE characters AND/OR
modifying the appropriate `bin` tool to convert leading ASCII TAB
characters into multiples of 8 ASCII SPACE characters.
This was done by:
sgit -e 's/alt code/alternate code/g' . ; git co tmp/OLD_manifest
as well as updating the tmp/manifest.numbers spreadsheet and exporting
to the CSV file (though that would not strictly be necessary).
The way this works means that the update manifest script does not need
to be run as it sgit(1) touched the .entry.json files (any that needed
to be updated) and so would any index.html files. An example for both
.entry.json and index.html files being modified due to manifest is
2012/kang.
Numerous Makefiles were updated, any try scripts that had 'alt code'
instead of 'alternate code' and README.md/index.html files (unrelated to
the manifest as 'alt code' was used in other places too) and obviously
the manifest.numbers spreadsheet.
However to be safe I will do a run of the manifest script in a bit even
though it should not be necessary. If no commits are made it means all
is good and if any commits are made for the manifest it means that I
did not think of something (or else I made another change after this).
We fix more markdown links in markdown files that refer to files
internally to the web site.
Added tmp tools to find and print various markdown links:
* `tmp/md-links.sh` - print all markdown links
* `tmp/md-token-links.sh` - print all markdown links that start with a **%%TOKEN%%**
* `tmp/md-local-links.sh` - print all markdown links to a local file
* `tmp/md-link-paths.sh` - print local file paths referenced in markdown links
Fixed a number of markdown formatting problems with `thanks-for-help.md`.
Fixed markdown links to files in `thanks-for-help.md`. Improved
heading levels in `thanks-for-help.md`, and made entry sections consistent.
Changed all markdown links that end in "))" to end in a better way.
Explained in `markdown.md` why we are avoiding markdown links that
end in "))".
Ran `make www` to perform the above.
TODO: Fix stuff we broke by mistake doing the above.
TODO: Fix more broken markdown links.
We added a space between the markdown triple code mark
and language that was enclosed in HTML comments.
So a line of the form:
````
```<!---c--->
````
became:
````
``` <!---c--->
````
This was done to **help** some code see that the HTML comment
string was not a markdown code specifier. Not all code
understands this after this changed. For example, `pandoc(1)`
still forms HTML classes of the form "<!---c-->"
when it encounters the above mentioned change.
We also fixed a problem with `2019/dogon/README.md` regarding
a markdown code block.
We also fixed a problem with `2020/yang/README.md` regarding
a markdown code block.
When language is specified in a markdown code block such as:
````
```c
printf("Hello, world!\n");
```
````
is used, the resulting HTML as produced by `pandoc(1)` combined
with our revised `ioccc.css` is not intent the code block well.
A temporary "_hack-a-round_" is to turn the "markdown code language
specifier" into an HTML comment. For example:
````
```<!---c-->
printf("Hello, world!\n");
```
````
This commits turns off existing markdown code language specifiers
for now, while preserving our ability to restore them in the future
when a better "_hack-a-round_" to the "markdown code language
specifier" problem is found.
The HTML impact if this "_hack-a-round_" is to produce HTML that
looks like this:
```
<pre class="<!---c-->"><code> .. </code></pre>
```
We might be able to create a complex set of classes for each markdown
code language (there won't be very many) in `ioccc.css`, or we might
find a more general CSS (or maybe `pandoc(1)`?) solution.
For now, this hack-a-round will have to do.
All code blocks in markdown have been intended by at least 4 spaces.
We add `--tab-stop=8` to all `pandoc(1)` executions in order to set
a better tab stop indentation, especially for tab intended code blocks.
Changed `bin/pandoc-wrapper.sh` VERSION from "1.5.3 2024-03-26"
to "1.6 2024-03-31".
Fixed `1991/brnstnd/sorta.README.md` so that the sorta code
is code blocks.
Removed unneeded paragraph group in copyright in `inc/footer.default.html`.
Fixed excess whitespace after list Author on entry `index.html` page.
Changed `bin/output-index-author.sh` VERSION from "1.5.2 2024-03-26"
to "1.6 2024-03-31".
Performed `make www` to perform the above and test under macOS.
TODO: Fix the problem of the initial line of code being extra intended.
TODO: Fix excess whitespace around code that is inline.
The inc/footer.default.html now has a common Copyright and CC BY-SA
4.0 License section for all generated HTML files.
All markdown files have a similar Copyright and CC
at the bottom in the form of an HTML comment.
The script had "s surrounding the git ls-files command which turned it
to a single file which of course is wrong.
Ran script again fixing many README.md files that had incorrect number
of blank lines for critical headers.
This will have to be done a final but a good number of files have been
corrected.
There already was one alt version which I found from the author's
website about the entry; they used the version for development and it's
unobfuscated. But two new ones were added.
The most important feature is that it allows one to change the image
size along with the anti-alias setting at compile time. This is
gavare.alt.c. The second version (which also has the size/anti-alias
changes) should theoretically work for Windows. This is gavare.alt2.c
and running make alt will not try and compile it as most it'll fail on
sane systems. Instead try make alt2. Both of these versions have some
form of protection with the size/anti-alias setting and one does not
have to define all three to get it to compile due to
'#ifndef..#elif..#endif' in the code.
The README.md file has been format/typo fixed.
There already was one alt version which I found from the author's
website about the entry; they used the version for development and it's
unobfuscated. But two new ones were added.
The most important feature is that it allows one to change the image
size along with the anti-alias setting at compile time. This is
gavare.alt.c. The second version (which also has the size/anti-alias
changes) should theoretically work for Windows. This is gavare.alt2.c
and running make alt will not try and compile it as most it'll fail on
sane systems. Instead try make alt2. Both of these versions have some
form of protection with the size/anti-alias setting and one does not
have to define all three to get it to compile due to
'#ifndef..#elif..#endif' in the code.
The README.md file has been format/typo fixed.
As requested on GitHub: a tool that will be written, readme2index, will,
as explained:
'... will take the converted HTML from the README.md markdown and
inject it into an HTML template. Things such title, award one and
author information will be injected into the HTML page ahead of the
HTML that was converted from the README.md markdown. Without going
into details of HOW at this time, the result will be a coherent HTML
index.html page with the winner title / award, winning author
information, and important file links come from other sources and
NOT from the README.md file.
The text from the 1st award line, thru the authorship information,
and up to but not including the "## To build:" line in the README.md
file will just get in the way. Moreover authors might be tempted to
try and maintain that top of README.md text instead of working with
the author/_author_handle_.json and winner .winner.json files.
This was done with my[0] sgit(1) (https://github.com/xexyl/sgit) tool like:
sgit -o -n -e '/^## To build:/,$p' '[12][0-9][0-9][0-9]/*/README.md'
[0] Is that shameless self-promotion? I don't know but I don't care: it
is generally a very useful tool and has been used in other repos too.
Besides, I've done it many times before and it's a great example that I
will be adding to the README.md file of the tool, one I hadn't thought
of doing.
Change level 3 (###) to level 2 (##):
sgit -e 's/^### \(Alternate code\)/## \1/g' '*README.md'
which is the same as:
sgit -e 's/^### Alternate code/## Alternate code/g' '*README.md'
This is per discussion in GitHub.
As in:
sgit -e 's/# To run/# To use/g' '*README.md'
This makes consistent the message for how to use the program. 'How to
use' was chosen because one can run a program just by doing './foo' but
that doesn't imply that's how to use it but the purpose of the section
is how to use it.
On the author's web page for the entry
(https://gavare.se/ioccc/ioccc_gavare.c.html) they provided an
unobfuscated version of the code. The code has been added to the repo
and Makefile as well.
To compile use:
make alt
and use gavare.r3 as you would use gavare.
Format fix README.md.
Add humour heading (as 'humor' as the author spelt it wrong :-) :-) )
instead of what was a '<humor>..</humor>'. This due this is not valid
html (guess why! :-) ) and so would not show up right in GitHub (or in
any other html document). Using a '### ...' seemed better than escaping
the <>s.
Dead link. Found new one via the Internet Wayback Machine.
There were many many README.md files with the wrong heading level for
different sections. These have been changed.
To help go through the changes it should be noted I used sgit and also
here is what is changed:
The 'Try', 'To build' and 'To run' lines have two '#'s. Some had one and
others had three.
An exception is that in 1984/anonymous/README.md for the alternative
code that had three '#'s. This is not consistent yet and it might be
that only two are desired. But for now that one at least has three.
It referred to ./prog but in 2004 prog was not the target but rather the
winner handle was.
Updated .gitignore: add ioccc_ray.ppm which the README.md try section
refers to.
There is one exception:
$ find . -name '*.hint' -execdir git mv '{}' README.md \;
git statufatal: destination exists, source=1992/albert/albert.hint, destination=1992/albert/README.md
Looking at the two files they differ quite a bit so I've not changed it.
I'll bring this up on GitHub.
Cody Boone Ferguson