Added `bin/bin/tar-entry.sh` to build a compressed tarball for an
entry. The compressed tarball is formed by gnu tar with options
so that the same entry file content will always produce the same
compressed tarball, byte for byte.
As some files are missing from some entries, one should
use the `-W` option as in:
```sh
bin/tar-entry.sh -v 5 -W 2020/ferguson1
```
Added `make form_entry_tarball` to the top level `Makefile`
to build entry tarballs even when files are still missing.
Added `make verify_entry_files` to verify that all entries have all
of their files listed in their manifest, plus the top level ioccc.css
and var.mk files. As file entry files are still missing (due to
HTML files that need to be built), the overall `make quick_www` and
`make www` do **NOT** (yet) exit when the `make verify_entry_files`
fails.
Improved `bin/chk-entry.sh` by removing some variables
that were not needed.
TODO: Improve `bin/` tool exit codes as the current use is a bit silly.
TODO: Clean out some variables used in `bin/` tools as some of then
are only set printed in debug statements.
TODO: Clean up usage messages, some of the options listed to not
match the `getopts(1)` parsing. In some cases the option needs to
be parsed but needs to be ignored by the tool because another tool
automatically passes along certain options that really have no
effect. Such ignored options need to be show as "This option is
ignored" in the usage message.
Added `bin/all-years.sh` to run a command over all years.
Added `bin/gen-year-index.sh` to build an `index.html`
for a given year.
Added support code to build an `index.html`
for a given year.
Added `make gen_year_index` to to level Makefile
and related rules.
Using the above, added `index.html` files for all IOCCC years.
Updated `bin/README.md` according to the above.
Improved comments in `bin/all-run.sh`.
Exported TOPDIR in all `bin/` tools that use TOPDIR.
Removed incorrect lines in `bin/quick-readme2index.sh`
usage message.
Improve -v 3 printed important variables messages,
in order that important variables are exported,
from all `bin/` tools.
Rebuild all HTML pages via `make www`.
We add to the top level Makefile, some initial rules that
will facilitate the building of HTML content.
The `bin/md2html.sh` tool as been updated to output HTML comments
about the output during HTML phases 20, 21 and 22.
All entry `index.html` files were updated with some additional HTML
comments as a result of the above. The top level `location.html`,
`years.html` and `authors.html` have had HTML comments added also
a result.
Sorry (tm Canada 🇨🇦) for the mass update of entry `index.html` files.
Hopefully the times when all of them (often) need to be updated
will soon draw to a close.
A _YYYY/.filelist_ is a simple list of files for a given IOCCC year
that need to be present when building a _YYYY_ level compressed
tarball. The list is relative to _docroot_ (top level repo directory).
We do not need a complex JSON file for such a simple list of files.
We only care about checking for the existence of files when forming
_YYYY_ level compressed tarball.
Renamed `.winner.json` to `.entry.json` as per recent decisions made for issue #2156.
JSON element _winner_JSON_format_version_ renamed to _entry_JSON_format_version_
in `.winner.json`.
Changed _entry_JSON_format_version_ from "1.0 2024-01-14" to "1.1 2024-02-11".
JSON element _winner_id_ renamed to _entry_id_ in `.entry.json`
JSON element _winner_text renamed to _entry_text_ in `.entry.json`
JSON element _winner_id_ renamed to _entry_id_ in `author/author_handle.json` files.
Changed _author_JSON_format_version_ from "1.0 2023-06-10" to "1.1 2024-02-11".
Renamed `tmp/gen_winner_json.sh` to `tmp/gen_entry_json.sh`.
Renamed `tmp/example.dot_winner.json` to `tmp/example.dot_entry.json`.
Renamed `tmp/winner_id.txt` to `tmp/entry_id.txt`.
Renamed `tmp/winner_dir.txt` to `tmp/entry_dir.txt`.
Moved outdated `tmp/awards_check.sh` into `tmp/OLD_manifest/awards_check.sh`.
Moved outdated `tmp/awards_check.sh` into `tmp/OLD_manifest/awards_check.sh`.
Moved outdated `tmp/src/winner_name` into `tmp/OLD_manifest/winner_name`.
Moved outdated `tmp/sql` into `tmp/OLD_manifest/sql`.
Moved outdated `tmp/template-footer.html` into `tmp/OLD_manifest/template-footer.html`.
Moved outdated `tmp/template-header.html` into `tmp/OLD_manifest/template-header.html`.
Moved outdated `tmp/template-top.html` into `tmp/OLD_manifest/template-top.html`.
Moved outdated `tmp/test.html` into `tmp/OLD_manifest/test.html`.
Moved outdated `tmp/fake.gen_index.sh` into `tmp/OLD_manifest/fake.gen_index.sh`.
Moved outdated `tmp/old-ioccc.css` into `tmp/OLD_manifest/old-ioccc.css`.
Removed winner_name from `tmp/src/Makefile`.
Updated `tmp/example.dot_entry.json` to reflect the above JSON changes.
Updated `tmp/manifest.numbers` to reflect the above JSON changes.
Updated `tmp/README.md` to reflect the above JSON changes.
Sorted `tmp/README.md` by existing `tmp` filenames.
Updated all `.entry.json` files to reflect the above JSON changes.
Updated all `author/author_handle.json` files to reflect the above JSON changes.
Added new tool `bin/gen-location.sh` to form the top level file `location.html`
from `author/author_handle.json` files!
Added new tool `bin/gen-years.sh` to form the top level file `years.html`
using `.top`, `.year` and `.entry.json' files!
Added new tool `bin/gen-authors.sh` to form a new top level file
`/authors.html` from `author/author_handle.json` and related
`.entry.json' files!
The old `winners.html` file now redirects to the new `authors.html` file.
Renamed `bin/gen-author.sh` to `bin/output-index-author.sh`.
Renamed `bin/subst.winner-index.sh` to `subst.entry-index.sh`.
Renamed `bin/subst.winner-index.awk` to `subst.entry-index.awk`.
Renamed `bin/manifest.entry.json.awk` to `bin/manifest.entry.json.awk`.
Renamed `bin/gen-inventory.sh` to `bin/output-index-inventory.sh`.
Renamed `bin/sort.gitignore` to `bin/sort.gitignore.sh`.
Renamed `bin/sgi` to `bin/sgi.sh`.
The core logic of converting markdown to HTML has been
generalized into a new `bin/md2html.sh` tool.
The `bin/readme2index.sh` tool now calls the
new `bin/md2html.sh` tool to form entry's `index.html` files.
The `bin/quick-readme2index.sh` tool now calls the new `bin/md2html.sh`
tool, unless the `index.html` is newer than both `.entry.json` and
`README.md`, to form entry `index.html` files.
Increased, slightly, the speed of the `bin/quick-readme2index.sh` tool
with the entry's `index.html` file does not need to be updated.
The `bin/quick-readme2index.sh` tool will touch the `index.html` file,
even if the `bin/md2html.sh` tool determines that the `index.html` file
did not change, so that the `index.html` file will not appear
out of date with respect to `.entry.json`.
Slightly improved the look and feel of `index.html` files for entries.
The logic of `bin/all-run.sh` has been improved. The initial
processing, from first bash version check, thru the -N test, serves
as the model for the `bin/readme2index.sh` tool and the
`bin/quick-readme2index.sh` tool. There tools now share
a common set of command line options.
Changed the format of `inc/md2html.cfg` so that for a given "_file_glob_"
match, options follow, one per line. The "_file_glob_" is on a line
by itself. The option lines that follow must be intended:
```
[12][0-9][0-9][0-9]/README.md
-H
topnav=year
-o
bin/subst.default.sh
-o
bin/subst.year.sh
```
Added "-D ./" to top level markdown files in `inc/md2html.cfg`.
The above intending is performed with 1 or more whitespace
characters, although we use a leading tab "convention"
out of deference to Makefile formats. :-)
Once a new "_file_glob_" is found, the set of any previous
option lines is said to have ended.
The general argument processing logic now makes used of shell arrays.
Added checks in the `bin/md2html.sh` tool to disallow a "_file_glob_"
of . (dot) as this is used internally to help the shell process the
new `inc/md2html.cfg` format.
Changed `bin/all-run.sh` VERSION from "1.1.2 2024-01-20"
to "1.3 2024-02-11".
Changed `bin/output-index-author.sh` VERSION from "1.3.1 2024-01-16"
to "1.4 2024-02-11".
Changed `bin/pandoc-wrapper.sh` VERSION from "1.3.2 2024-01-19"
to "1.4 2024-02-05".
Changed `bin/quick-readme2index.sh` VERSION from "1.0 2024-01-20"
to "1.1 2024-02-11".
Changed `bin/readme2index.sh` VERSION from "1.1.1 2024-01-20"
to "1.2 2024-02-11".
Changed `bin/subst.default.sh` VERSION from "1.1.1 2024-01-16"
to "1.2 2024-02-05".
Changed `bin/subst.entry-index.sh` VERSION from "1.1.1 2024-01-16
to "1.2 2024-02-11".
Changed `bin/output-index-inventory.sh` VERSION from "1.0.1 2024-01-16"
to "1.1 2024-02-11".
Changed `bin/manifest.entry.json.awk` from "1.0 2024-01-14"
to "1.1 2024-02-11".
Changed `bin/sort.gitignore.sh` from "1.0 2024-02-01"
to "1.1 2024-02-11".
Changed substitution symbol _%%DOCROOT_URL_SLASH%%_ to _%%DOCROOT_SLASH%%_
in various "inc/*.html" files.
Moved setting of symbol _%%DOCROOT_SLASH%%_ from `bin/subst.entry-index.sh`
to `bin/subst.default.sh`.
Changed the variable _$DOCROOT_URL_SLASH_ to _$DOCROOT_SLASH_, in
bin tools that use it, to be more descriptive.
Removed `-P pandoc_opts` from `bin/*.sh` command lines.
The PANDOC_WRAPPER_OPTSTR value is only used in `bin/pandoc-wrapper.sh`.
Removed `-B optstr` and `-A optstr` from the `bin/md2html.sh` command line.
Removed `[-O tool=optstr ..]` from the `bin/md2html.sh` command line.
Removed old use of `-U top_url` from command lines.
Add `-w site_url` as sort of a "replacement" for the old `-U top_url`.
Added a new `-U URL` to `bin/gen-author.sh`, `bin/output-index-inventory.sh`,
`bin/md2html.sh`, `bin/subst.default.sh`, and `bin/subst.entry-index.sh`
to allow for the Nu HTML check can use the encoded absolute URL of
the HTML page.
Added `-t tagline` to most command lines.
Added `-T md2html.sh` to most command lines.
Added `-D docroot/` to most command lines to set DOCROOT_SLASH.
The DOCROOT_SLASH value defaults to "../../" for most in tools,
suitable for HTML files under a `YYYY/dir` directory, except for
`bin/gen-location.sh` and `gen-entries-html.sh` (as this produces a
top level HTML file) and `bin/md2html.sh` (forms files at any level)
who use "./" instead.
In the case of `bin/output-index-inventory.sh`, `bin/quick-readme2index.sh`,
`bin/readme2index.sh`, and `bin/all-run.sh`
Helped make the use of exit code in bin tools a bit more consistent.
Fixed a number of typos in the bin tools.
Added comments for lower level tools such as
`manifest.entry.json.awk`, `bin/subst.default.sh`,
`bin/subst.entry-index.sh`, and bin/`manifest.entry.json.awk` to
indicate how they are usually invoked by other tools.
Changed the comments that a new `bin/md2html.sh` tool (that was the
`bin/readme2index.sh` tool) would add to a entry's `index.html` file.
No longer will it add the tool version number to the comment. Thus,
a change in tool version will not force all entry `index.html`
files to be modified. Now both the tool adds two comments, one
is the _tagline_ to indicate how the markdown content was generated,
and one for the new `bin/md2html.sh` tool. For example:
```
<!-- The original markdown content was formed by the tool: bin/quick-readme2index.sh -->
<!-- The HTML was converted from markdown by the tool: bin/md2html.sh -->
```
Improve the debugging, especially in regards to changing important
exported shell variables, in `bin/md2html.sh`. Other bin tools
have their exported shell variables improved somewhat as well.
The `bin/README.md` now describes the general _converting markdown
to HTML_ procedure including _getopt phases_ and _HTML phases_.
Content from `inc/md2html.cfg` and `bin/readme2index.sh` that related
to this topic has been centralized into the `bin/README.md` file.
Improved formatting of the `bin/README.md` file. Updated it as needed
according to the above.
Sorted `2011/.year`, `2018/.year`, and `2019/.year` to be in dictionary order.
Adjusted ${WINNERS} in year Makefile to use dictionary order so
that `make genpath` will produce `.year` files in dictionary order.
FYI: We tested this massive set of changes as best as we could.
Nevertheless we might have missing something in the JSON changes,
`.entry.json` renames, manifest updates, code comments, etc.
We sort with lines starting with # first.
We sort with lines starting with * second.
We sort with lines that do not start with [#!*] third.
We sort with lines starting with ! fourth.
Example usage in vim with a keyboard macro <escape>f:
```vim
:map ^[f 1G!G../../bin/sgi^M
```
or via .vimrc:
```vimrc
" sort the entire .gitignore file using ../../bin/sgi
:map ^[f 1G!G../../bin/sgi^M
```
NOTE: The ^[ above is ((Escape)) and ^M is ((Control-M)).
Example usage in shell:
```sh
rm -f t && ../../bin/sgi < .gitignore > t && mv -f t .gitignore
```
Suggested usage:
```sh
bin/all-run.sh bin/sort.gitignore -v 1
```
Sorted all winner .gitignore according to this method.
Sorted all year level .gitignore according to this method.
Sorted top level .gitignore according to this method.
The additional commands I added cannot come first because the program
(as the bugs.md states and now more clearly) will likely crash (and does
in all the systems I tested) if the file does not exist. This did not
show itself the first time because the files already existed but running
make clobber before the script would remove the image files and thus a
crash (or actually two) would occur the first time the script was run
(second time it would be fine as the files it uses then exist).
As for the shellcheck warning could be fixed (missing '\' before a '"')
and the useless cat ones had the rationale updated (it's what the author
used so it's easier to verify it's okay though I still say - and so does
the script - that there's no such thing as a useless cat) and the format
of what warning is disabled (URL included).
Now randomly selects 10 numbers (in range $((RANDOM % 101))).
Also allows one to pass in numbers (or if they wish to they can pass in
non-numbers) to pass to the program.
The script has new fun numbers.
Removed that the valid range is from 0 - 255 as numbers bigger than 255
not only work but some show some fun output (a number of which are used
in the script now).
The try.alt.sh uses the alt code. This helps further show how a single
letter can change so much and thus one can really appreciate the
subtlety of the entry even more. The other scripts were improved.
The Makefile rules added:
hint.pdf
hint
hello.pdf
hello
The hint rules generate the hint.pdf (which is the README.md file
obfuscated in a pdf) by feeding the program README.md and then it
compiles hint.pdf as C code. Running it will print the README.md file!
The hello rules generate hello.pdf which is (inside the pdf) an
obfuscated 'Hello World!' program. This is done by a simple echo piped o
the program which redirects it to hello.pdf. Then hello.pdf will be
compiled as C code which when run (as ./hello2) will print 'Hello
World!'.
The script now uses these rules to do what was once done manually. These
rules are .PHONY rules as otherwise they might not always run.
The clobber rule now removes these files.
The try section in the README.md file did not refer to the script.
The URL in the cookie recipe file was updated to refer to the domain
that the old one redirects to just in case the old one ever expires or
no longer redirects to the more recent domain. The thanks file notes
this for reference as an aside for context and historical purposes,
noting both URLs.
The new try.sh and try.bw.sh scripts run the program on one file (passed
to the script) in colour and without colour respectively. One file
because one has to terminate the program.
The new try.alt.bw.sh is like try.alt.sh but uses the black and white
(original submitted entry) version.
The scripts for the alt code allow one to set the different variables
that can be redefined. The use is the same variable names as in the
Makefile. For instance:
TIMER=5 SLEEP=5000 GRAVITY=I VISCOSITY=4 PRESSURE=1 ./try.alt.sh
TIMER=5 SLEEP=5000 GRAVITY=I VISCOSITY=4 PRESSURE=1 ./try.bw.alt.sh
for the gravity 'I' and:
TIMER=5 SLEEP=5000 GRAVITY=N VISCOSITY=4 PRESSURE=1 ./try.alt.sh
TIMER=5 SLEEP=5000 GRAVITY=N VISCOSITY=4 PRESSURE=1 ./try.bw.alt.sh
where 'N' is some number. Obviously the other values can have different
values than given above. Some of these values are protected against in
code (to an extent - if the user wants to set them to strings that's on
them) but not all are and the scripts do not try and check for the user
either.
The endoh1.alt.c file was changed in that one can now define SLEEP (S in
the code) to 0 like the original, should they want to see the original
but with other values specified. That will make it flash much more
quickly which can be a problem of course but that's up to each user.
Improve less(1) options so that the screen is not cleared (to keep the
source visible after it's seen) and to exit at EOF.
Try converting image files to png files. If this fails then as long as
pbm files exist it will print those (telling the user to open them in
their graphics viewer of choice). Otherwise if png files exist it lists
the png files (with the same message). If no png and no pbm files exist
it warns them that something went wrong and they are free to fix and
open a pull request. This handling of convert(1) checks should probably
be done in other scripts where I neglected to do this (it's entirely
possible though unlikely that a convert program exists that returns
success but does not do what we expect).
Updated .gitignore.
The script now has quotes surrounding commands with '*'s in it and the
messages (of which some were added - only one existed before) were
improved when it comes to giving a warning that the next command might
take a bit of time. There are different messages depending on how slow
the commands are though this obviously cannot be even close to perfect.
Updated .gitignore.
Improved `all-run.sh` and `readme2index.sh` so that
certain command line options (e.g., -p, -P, -u, -U ...)
are only passed along to other tools if they are
given on the command line.
all-run.sh VERSION changed from "1.1.1 2024-01-19"
to "1.1.2 2024-01-20",
readme2index.sh VERSION changed from "1.1 2024-01-16"
to "1.1.1 2024-01-20".
Added `quick-readme2index.sh` that only calls
`readme2index.sh` if the `index.html` is not
a non-empty file, or of either `.winner.json`
and/or `README.md` is newer than `index.html`.
Updated all `index.html` files because the
the file contains a comment that includes
the newly modified readme2index.sh VERSION.
We all know what is meant by 'brain$#@$' and there's no need to censor
it especially when it links to the article on wiki that does not censor
it (not that grawlixes are even censoring anything). This means there's
no need to escape the '$' as they are not there now.
Updated manifest as per recent file changes.
Updated winner `.winner.json` to reflect the manifest changes.
Added [bin/all_run.sh](bin/all_run.sh) tool to run a command over
all winning entries.
These tools had slight improvements in the help usage message:
* bin/gen-author.sh VERSION="1.3.1 2024-01-16"
* bin/gen-inventory.sh VERSION="1.0.1 2024-01-16"
* bin/pandoc_wrapper.sh VERSION="1.3.1 2024-01-16"
* bin/subst.default.sh VERSION="1.1.1 2024-01-16"
* bin/subst.winner-index.sh VERSION="1.1.1 2024-01-16"
The `bin/readme2index.sh` tool was improved so that
if the `index.html` file exists and the tool forms
the exact same content, then the file `index.html`
file is NOT touched.
* bin/readme2index.sh VERSION="1.1 2024-01-16"
We used the following command to generate `index.html` files
for all winning entries:
```sh
bin/all_run.sh -v 3 bin/readme2index.sh
```
NOTE: We have not (yet) built HTML files above the winner directory
level (e.g., no year level nor top level HTML), nor have be built
non-index HTML files for winners.
NOTE: By default we are running `pandoc(1)` with:
```
--fail-if-warnings=true
```
This means that any problems with markdown to HTML
generates an error. This is done to be sure that
the HTML conversion is clean.
We had to fix the following `README.md` files:
* `2000/rince/README.md`
The reference [^2] was never used. We made a guess that [^2] applies
to the same spot as [^1]. Perhaps there is a better spot where
[^2] applies?
NOTE: For every reference, there MUST be some place where that
reference is used.
* 2012/vik/README.md
The string "$...$" is assumed to be a TeX encoded string.
NOTE: Every "$..$" needs to be backslashed as in "\$..\$".
* 2018/burton1/README.md
The reference [2] was duplicated. We changed the
second [2] to [3].
NOTE: Every reference needs to have a unique number.
* 2020/carlini/README.md
The string "$...$" is assumed to be a TeX encoded string.
NOTE: Every "$..$" needs to be backslashed as in "\$..\$".
We also found 2 errors in the `author/author_handle.json` file set:
* author/Anonymous_2001.json
The `author/Anonymous_2001.json` file was missing.
* author/Jari_Arkko.json
The winner ID for `1989_jar.1` had a typo.
The initial release of `bin/readme2index.sh` tool that converts
`READMD.md` and various JSON files such as `.winner.json`
as well as "author/author_handle.json" files.
Applied the `readme2index.sh` tool to generate `2020/ferguson1/index.html`.
We generated the `2020/ferguson1/index.html` by executing:
```sh
./bin/readme2index.sh -v 3 2020/ferguson1
```
NOTE: This above tool requires **pandoc to be installed**.
See the [pandoc web site](https://pandoc.org) for how
to install. We used _HomeBrew_ to install it,
but there is also a _macports_ process as well.
NOTE: While the above web page does have formatting issues, it is
a first attempt data driven programmatic web page generation.
Some adjustments can be made by mostly improving `ioccc.css`,
and some perhaps by modifying how `bin/pandoc_wrapper.sh`
invokes pandoc. But probably most of the improvements can
be made by fixing and improving `ioccc.css`.
TODO: Fix and improve the `2020/ferguson1/index.html`
web page by fixing and improving `ioccc.css`.
Moved scripts and tools needed to generate HTML pages
into a new `/bin` subdirectory.
TODO: Consider getting rid of the [build-ioccc
repo](https://github.com/ioccc-src/build-ioccc) and just use the
`/bin` subdirectory.
NOTE: Some links in the `2020/ferguson1/index.html`
web page do not (yet) exist.
TODO: Once the basic format of the `2020/ferguson1/index.html` web
page is somewhat reasonable, generate `index.html` pages for other
winners. Generate the year level `index.html' files.
Generate the top level HTML files, including the missing
`location.html` file.
Greatly simplified the `.winner.json` file format,
removing a number of fields that were not strictly needed
for generating an inventory on a `index.html` page.
Updated various versions:
* `bin/gen-author.sh` VERSION="1.3 2024-01-14"
* `bin/gen-inventory.sh` VERSION="1.0 2024-01-14"
* `bin/manifest.winner.json.awk` VERSION="1.0 2024-01-14"
* `bin/pandoc_wrapper.sh` VERSION="1.3 2024-01-14"
* `bin/readme2index.sh` VERSION="1.0 2024-01-14"
* `bin/subst.default.sh` VERSION="1.1 2024-01-14"
* `bin/subst.winner-index.sh` VERSION="1.1 2024-01-14"
* `tmp/gen_path_list.found.sh` VERSION="1.1 2024-01-14"
* `tmp/gen_winner_json.sh` VERSION="1.1 2024-01-14"
The `.winner.json` file format from winner_JSON_format_version
"0.5 2023-11-04" to "1.0 2024-01-14".
All `.winner.json` files have been updated to use the
new `.winner.json` file format.
The manifest (`tmp/manifest.numbers` and `tmp/manifest.csv`) has
updated to use the new `.winner.json` file format.
The following procedure was used to generate the
`tmp/manifest.csv` manifest file:
0. open [manifest.numbers](manifest.numbers) in numbers: modify if/as needed
NOTE: Please try to keep the [manifest.numbers](manifest.numbers) spreadsheet
in order order. Use Organize -> Sort -> ((Sort Now)) to sort.
NOTE: Empty fields in the [manifest.numbers](manifest.numbers) spreadsheet
are not allowed. By default, a cell that is empty is colored
as a warning.
1. File -> Export To -> CSV...
* 1a. `[ ]` Include table names (unset)
* 1b. Text Encoding: Unicode (UTF-8)
* 1c. Click ((Save..))
2. Save As: manifest.csv
* 2a. Select the `tmp` directory
3. Click ((Export))
* 3a. If needed click ((Replace))
4. Execute ./tmp/[fix_csv.sh](fix_csv.sh)
NOTE: You must run the [fix_csv.sh](fix_csv.sh) in the above
step in order to make the CSV file usable by other tools.
NOTE: If no changes are needed in the above step, the
original file content will be restored.
5. Execute ./tmp/[gen_path_list.found.sh](gen_path_list.found.sh)
NOTE: The above step silently performs a `make clobber` at the
top level, and so it takes a bit of time.
NOTE: If no changes are needed in the above step, the
original file content will be restored.
6. Execute ./tmp/[check_path_list.sh](check_path_list.sh)
NOTE: The above step prints nothing and for an exit 0, then
all is well. If there is a problem, such as files
found that are not part of the manifest, or files
in the manifest that are not found, then an error
message will be printed and the tool will exit non-zero.
If errors are reported, go back to step 0 and
correct the errors.
7. Execute ./tmp/[run_all.sh](run_all.sh) ./gen_winner_json.sh
NOTE: The above step will take a few seconds to run. It will rebuild
all `.winner.json` files for all winners.
NOTE: If no changes are needed in the above step, the
original file content will be restored.
8. Execute `git status` and inspect changes
NOTE: Check in changes if and as needed.
NOTE: In a number of shell scripts under `bin/*.sh`,
and in the `bin/manifest.winner.json.awk` script
you will find comments of the form:
```
```
This is a note that when tools such as `jnamval` (and `jval` and `jfmt`) are
ready, these gross hacks should be replaced with calls to those tools.
Until they are ready, some must be careful with the layout of JSON files.
A number of bugs and typos have been fixed.
NOTE: Fixing typos in the files touched by this comment is welcome.
This includes scripts, data files, text files, etc.
The _inventory_order_, _display_as_, _display_via_github_. and
_winners_text_ fields of the [manifest.numbers](manifest.numbers)
spreadsheet were just set to have some initial values.
As they impact the inventory displayed on `index.html` pages,
their content needs to be improved.
NOTE: Improving the above mentioned fields of the
[manifest.numbers](manifest.numbers) spreadsheet is welcome.
Update the manifest as per recent file changes.
Removed inventory.html from all winners as the inventory will be
added to the winner `index.html` instead,
Updated winner `.winner.json` files as per the above.
The script had "s surrounding the git ls-files command which turned it
to a single file which of course is wrong.
Ran script again fixing many README.md files that had incorrect number
of blank lines for critical headers.
This will have to be done a final but a good number of files have been
corrected.
For the top level and year level README.md, where email are found,
a note was added to the effect that email addresses found above are
for historical purposes only, and should not be used today.
Old references to asking for fixes, comments, when content was used,
and next contest links were replaced with a general reference to the FAQ.
Harmonized the Copyright and License and copyright dates.
Now using Creative Commons "CC BY-SA 4.0 DEED Attribution-ShareAlike 4.0
International".
The above Creative Commons will become the standard for the IOCCC.
Replaced old `png/by-sa-3.0-88x31.png` with a new ` png/by-sa.88x31.png` icon.
Updated the top level HTML files to use the license.
Now one can use variables SLEEP, TIMER, GRAVITY, PRESSURE and VISCOSITY,
rather than single letter variables. This is like other commits where
instead of having to redefine CDEFINE one can do something like
make clobber SLEEP=50 GRAVITY=I TIMER=15 alt
Notice that some can be set to I rather than a number. See the author's
remarks for details.
The try.alt.sh script was updated for this improvement.
fix experimental web site links in experimental index.html
sync CNAME with https://github.com/ioccc-src/winner/blob/master/CNAME
improve .gitignore files
Added to each .gitignore file, comments on how to sort.
Put into winner .gitignore files, ignore *.dSYM files.
Put into winner .gitignore files, ignore indent.c,
indent.o and indent files. This is done so that the
winner directory can more self contained.
We did not put into winner .gitignore files, however,
excludes of .-files as found in the top level .gitignore file.
As .-files are not allowed by mkiocccentry, the top level
.gitignore file remains sufficient.
Added to year level .gitignore files, excludes of
mkentry or iocccsize files as needed.
Sorted (via sort -d -u) all .gitignore file.
Add .path files to each winner directory: a file containing
the path to the winner directory from the top directory.
Changed YYYY/.year files to contain the paths, from the top
directory, if the winning directories for the given year.
Changed `/.top` to contain the IOCCC years.
Added `make genpath` rule to the top Makefile and the
year Makefiles to generate the above.
Added FAQ 6.8 to `faq.md` to explain the above.
Updated manifest to reflect recent changes to the list of files.
And since the try.sh scrambles and descrambles a cookie recipe I will
offer this funny story from decades ago that my mum tells every so
often: my uncle, who lived with my parents, and my father were at home
and they made 12 dozen cookies. They called my mum at her work and told
her: we made twelve dozen cookies and we saved you one! My mum thought
they meant she saved them one dozen cookies, already suggesting they had
eaten too many. But no. They left her one cookie! The reason is they
couldn't get the milk and cookies balanced so the only obvious thing to
do was to eat 143 cookies. Obviously. They were quite sick and nobody
was sympathetic to their ridiculous stunt.
So let that be a lesson to anyone who decides they want to eat 143
cookies: just eat 142 and you'll be just fine, weight gain
notwithstanding! :-) (Okay maybe keep it at 24 .. unless they're
chocolate in which case you might want to eat three, four, five, however
many dozen you can fit in your stomach.)
Only the last paragraph is not sincere. The first really did happen.
To make the script more like the other entries I renamed the script I
originally named everything.sh (because there's so much it does and it
uses 'make everything') to try.sh.
The README.md file has been format and typo checked.
This should complete the review of 2012/endoh2.
The alt code now has an option to use alarm(3) so that one need not hit
ctrl-c/intr for each run (default 10 seconds, can be disabled or changed
at compilation just like the other macros). This is used in try.alt.sh
which shows the program (colour version) on the source code and then the
text files provided by the author. The script does two 'versions' for
each file: one with setting gravity factor to I (see author's remarks)
and one without that. These changes make a nice demonstration of the
entry.
This commit also fixed a problem that the previous commit caused to do
with the alt targets in the Makefile.
This should complete the review of 2012/endoh1, leaving two more to go
for 2012.
The alt2 is the deobfuscated version; the alt one is the one with the
ability to slow down/speed up the fluid and control the gravity factor,
the pressure factor and/or the viscosity factor.
The alt version no longer imposes a lower limit on the factors because
doing so prevents the ability to define them to 'I' which the author
noted is a functional difference.
The alt versions let one control how long to sleep between writes as in
modern systems it goes pretty fast. There are two, one for the colour
version that was added by Yusuke at the request of the judges and one
for the original. But the one for the original is called endoh1.alt2.c
as Yusuke provided endoh1.alt.c as a deobfuscated version.
The new alt versions let one only redefine certain macros should they
choose but they can define them all or not define them all because of
the #ifndef..#endif guards. These macros include the sleep time (S) as
well as the others that Yusuke suggested one might want to change.
The README.md file has been format/typo checked.
Landon Curt Noll