Amongst the changes here is that we do not need to have the hex or html
code (numbers) for open and close parentheses (in links) as there are
names. '(' is & followed by lpar; and the ')' is the same but 'rpar;'
instead. This makes it easier to remember and type and it generates the
same html as well (they are all valid). Now the markdown files are
consistent in this (in some cases hex was used and in others the html
code).
Although many markdown files were updated no html files needed to be
updated as it generates the same html. Even so I ran the appropriate
rules to do so just to verify this.
While not strictly necessary, replacing the two ASCII tab characters
in the markdown copyright comment makes it easier to detect problematic
TAB indentation within markdown files.
After this commit, only 90 markdown files have leading ASCII TAB
characters. And again, while not strictly necessary, we can consider
running expand on those 90 markdown files to see what effect that
might have on the HTML files they produce.
Replace leading ASCII TAB characters with multiples of 8 ASCII SPACE
characters (the default action of the `expand(1)` tool) might have
an negative effect on some HTML formatting where **hack-a-round**
formatting was attempted to fix broken indentation caused by
problematic ASCII TAB characters.
Think of this as a baseline for evaluating leading
TAB characters within markdown files.
TODO: Consider either using `expand(1)` to replace leading ASCII
TAB characters with multiples of 8 ASCII SPACE characters AND/OR
modifying the appropriate `bin` tool to convert leading ASCII TAB
characters into multiples of 8 ASCII SPACE characters.
We fix more markdown links in markdown files that refer to files
internally to the web site.
Added tmp tools to find and print various markdown links:
* `tmp/md-links.sh` - print all markdown links
* `tmp/md-token-links.sh` - print all markdown links that start with a **%%TOKEN%%**
* `tmp/md-local-links.sh` - print all markdown links to a local file
* `tmp/md-link-paths.sh` - print local file paths referenced in markdown links
Fixed a number of markdown formatting problems with `thanks-for-help.md`.
Fixed markdown links to files in `thanks-for-help.md`. Improved
heading levels in `thanks-for-help.md`, and made entry sections consistent.
Changed all markdown links that end in "))" to end in a better way.
Explained in `markdown.md` why we are avoiding markdown links that
end in "))".
Ran `make www` to perform the above.
TODO: Fix stuff we broke by mistake doing the above.
TODO: Fix more broken markdown links.
The topbar, by way of JavaScript, now works
on mobile devices such as cell phones and
tablets.
Internal links for entries from 1984 thru 2015
have been adjusted.
Ran `make www` to perform the above.
TODO: Fix some color issues on topbar.
TODO: More testing!
Improve `make clobber` for `2004/anonymous`.
Instead of using this markdown element to embed an image:
```
```
Use a "img" HTML element with "alt", "alt", "width" and "length"
attributes:
```
<img src="filename.png"
alt="describe the filename.png image for someone who cannot view it"
width=PIXEL_WIDTH height=PIXEL_HEIGHT>
```
This was performed for:
```
2004/anonymous/index.html
2005/boutines/index.html
2011/goren/index.html
2012/vik/index.html
2013/birken/index.html
2013/cable1/index.html
2013/cable3/index.html
2013/hou/doc/example.html
2013/hou/index.html
2020/ferguson1/chocolate-cake.html
```
In the case of `2013/cable1/index.html` we reduce the displayed
image size by a factor for 2. There is **NO** need to downsize the image
as this image size reduction produces a clean and sharp looking image.
In the case of `2013/hou/index.html` we reduce the displayed
image size by a factor for 2. There is **NO** need to downsize the image
as this image size reduction produces a clean and sharp looking image.
In the case of `2020/ferguson1/chocolate-cake.html` we reduce the displayed
image size by a factor for 4. There is **NO** need to downsize the image
as this image size reduction produces a clean and sharp looking image.
Run `make www` to perform the above.
We added a space between the markdown triple code mark
and language that was enclosed in HTML comments.
So a line of the form:
````
```<!---c--->
````
became:
````
``` <!---c--->
````
This was done to **help** some code see that the HTML comment
string was not a markdown code specifier. Not all code
understands this after this changed. For example, `pandoc(1)`
still forms HTML classes of the form "<!---c-->"
when it encounters the above mentioned change.
We also fixed a problem with `2019/dogon/README.md` regarding
a markdown code block.
We also fixed a problem with `2020/yang/README.md` regarding
a markdown code block.
When language is specified in a markdown code block such as:
````
```c
printf("Hello, world!\n");
```
````
is used, the resulting HTML as produced by `pandoc(1)` combined
with our revised `ioccc.css` is not intent the code block well.
A temporary "_hack-a-round_" is to turn the "markdown code language
specifier" into an HTML comment. For example:
````
```<!---c-->
printf("Hello, world!\n");
```
````
This commits turns off existing markdown code language specifiers
for now, while preserving our ability to restore them in the future
when a better "_hack-a-round_" to the "markdown code language
specifier" problem is found.
The HTML impact if this "_hack-a-round_" is to produce HTML that
looks like this:
```
<pre class="<!---c-->"><code> .. </code></pre>
```
We might be able to create a complex set of classes for each markdown
code language (there won't be very many) in `ioccc.css`, or we might
find a more general CSS (or maybe `pandoc(1)`?) solution.
For now, this hack-a-round will have to do.
All code blocks in markdown have been intended by at least 4 spaces.
We add `--tab-stop=8` to all `pandoc(1)` executions in order to set
a better tab stop indentation, especially for tab intended code blocks.
Changed `bin/pandoc-wrapper.sh` VERSION from "1.5.3 2024-03-26"
to "1.6 2024-03-31".
Fixed `1991/brnstnd/sorta.README.md` so that the sorta code
is code blocks.
Removed unneeded paragraph group in copyright in `inc/footer.default.html`.
Fixed excess whitespace after list Author on entry `index.html` page.
Changed `bin/output-index-author.sh` VERSION from "1.5.2 2024-03-26"
to "1.6 2024-03-31".
Performed `make www` to perform the above and test under macOS.
TODO: Fix the problem of the initial line of code being extra intended.
TODO: Fix excess whitespace around code that is inline.
The inc/footer.default.html now has a common Copyright and CC BY-SA
4.0 License section for all generated HTML files.
All markdown files have a similar Copyright and CC
at the bottom in the form of an HTML comment.
Entry source is now prog.c for IOCCC years 2014 thru 2020,
or is now dirname.c IOCCC years 1984 thru 2013.
To achieve this state, we renamed the following:
renamed: 2004/hibachi/src/hibachi.c -> 2004/hibachi/hibachi.c
renamed: 2012/omoikane/nyaruko.alt.c -> 2012/omoikane/omoikane.alt.c
renamed: 2012/omoikane/nyaruko.alt2.c -> 2012/omoikane/omoikane.alt2.c
renamed: 2012/omoikane/nyaruko.c -> 2012/omoikane/omoikane.c
renamed: 2012/omoikane/nyaruko.orig.c -> 2012/omoikane/omoikane.orig.c
Modified `bin/subst.entry-index.sh` to add to entry `index.html` file,
links to the `Makefile` and the _C code_ to the top navigation bar.
Changed `bin/subst.entry-index.sh` VERSION from "1.2.2 2024-02-25"
to "1.3 2024-03-02".
Moved printing the Inventory link in the top navigation bar
from `bin/subst.entry-navbar.awk` to `bin/subst.entry-index.sh`.
Changed `bin/subst.entry-navbar.awk` VERSION from "1.0.1 2024-02-23"
to "1.1 2024-03-02".
Moved printing the Inventory link in the top navigation bar
from `bin/subst.year-navbar.awk` to `bin/subst.year-index.sh`.
Changed `bin/subst.year-index.sh` VERSION from "1.0 2024-02-11"
to "1.1 2024-03-02".
Changed `bin/subst.year-navbar.awk` VERSION from "1.0 2024-02-11"
to "1.1 2024-03-02".
Added location names (both default and common) to `author.html`.
Changed `tmp/gen_author_json.sh` VERSION from "1.0 2023-06-06"
to "1.1 2024-03-04".
Added location names (both default and common) to `author.html`.
Changed `bin/gen-authors.sh` VERSION from "1.2 2024-03-09"
to "1.3 2024-03-04".
The manifest and the resulting `.entry.json` files have been changed
for `2004/hibachi` and `2012/omoikane`.
The Makefiles for `2004/hibachi` and `2012/omoikane` copy the
source file into the "previously used location". The `make clobber`
rule removes the copied source. The `.gitignore` files have been
updated accordingly.
Improved how the concept of IOCCC terms _entry_, _author_ and _submission_ are
used in markdown files.
Links to markdown files (files ending in .md) within the repo were
changed to link to HTML files (files ending in .html). Special cases
where `README.md` became `index.html` were modified accordingly.
Fixed URL for `bugs.html` in Makefile comments.
Fixed name of `bin/sgi.sh` referenced in comments in `.gitignore` files.
Links to locations within the repo are now relative. For example a
link to `/contact.html` may become `../contact.html' or '../../contact.html`
depending on the directory level of the markdown file.
Nearly all links with absolute URLs under _https://www.ioccc.org_
or `https://ioccc-src.github.io/temp-test-ioccc_ have been changed to
relative paths within the repo. Some exceptions to this (such as
referring to a GitHub repo) were preserved.
Fixed a number of inside `faq.md` and `bugs.md`.
Added HTML name tags (in the form of an _entry_id_) for each entry
referenced in `bugs.md`. Fixed links from outside of `bugs.html`
into `bugs.html` accordingly.
Where FAQ entries are referenced, a named tag is used so that if a
FAQ is ever renumbered, links outside of `faq.html` will still work.
Changed the _inventory_order_ of a compressed tarball from _300_
to _100000_. While this may have been done for the manifest,
this changed had not yet been propagated into the `.entry.json` files.
Links to web sites that were in the for <URL> are now [URL](URL).
Performed `name www` to process all of the above.
Improved format of `authors.html`. Full names are now bold.
Location codes are now links back into `location.html` and
location names (both default and common) are now italics.
Added _author_handle_ each author.
Changed `bin/gen-authors.sh` VERSION from "1.1 2024-02-25"
to "1.2 2024-03-09".
Improved format of `location.html` as location codes are now bold,
author counts in a given location are now bold, and location names
(both default and common) are now italics.
Changed `bin/gen-location.sh` VERSION from "1.0.1 2024-02-23"
to "1.1 2024-03-04".
Added italic location name after location code in entry
`index.html` files.
Changed `bin/output-index-author.sh` VERSION from "1.4.1 2024-02-23"
to "1.5 2024-03-04".
Added _Location of authors_ to the sidebar as a link to `location.html`.
TODO: While nearly all of the above mentioned changes are likely correct,
they likely introduced a few errors that need correcting.
The script had "s surrounding the git ls-files command which turned it
to a single file which of course is wrong.
Ran script again fixing many README.md files that had incorrect number
of blank lines for critical headers.
This will have to be done a final but a good number of files have been
corrected.
The try.sh script now does a random run of the program (previously in
the remarks in the try section) involving perl but only if perl is
installed in the system.
The README.md file has been format/typo fixed.
It is not clear if this entry is done or not yet as it might be improved
if try.sh is renamed try.alt.sh (for the alt version which it uses) and
a new try.sh be formed which uses the original code so that one does not
have to do say:
BIRKEN=birken ./try.sh
This probably would be better but it is not done yet.
As long as the program (alt code and otherwise) runs to completion the
program will return instead of 0:
system("reset");
so that the terminal becomes sane again (otherwise cursor is invisible).
One could also use 'tput cvvis' but this is longer and I wanted to make
the column as close to the original ending as possible.
As requested on GitHub: a tool that will be written, readme2index, will,
as explained:
'... will take the converted HTML from the README.md markdown and
inject it into an HTML template. Things such title, award one and
author information will be injected into the HTML page ahead of the
HTML that was converted from the README.md markdown. Without going
into details of HOW at this time, the result will be a coherent HTML
index.html page with the winner title / award, winning author
information, and important file links come from other sources and
NOT from the README.md file.
The text from the 1st award line, thru the authorship information,
and up to but not including the "## To build:" line in the README.md
file will just get in the way. Moreover authors might be tempted to
try and maintain that top of README.md text instead of working with
the author/_author_handle_.json and winner .winner.json files.
This was done with my[0] sgit(1) (https://github.com/xexyl/sgit) tool like:
sgit -o -n -e '/^## To build:/,$p' '[12][0-9][0-9][0-9]/*/README.md'
[0] Is that shameless self-promotion? I don't know but I don't care: it
is generally a very useful tool and has been used in other repos too.
Besides, I've done it many times before and it's a great example that I
will be adding to the README.md file of the tool, one I hadn't thought
of doing.
This is because they are under the try section. I'm aware that there's a
script called try.me.sh but that's not been decided on a name change. It
probably should be changed to try.sh to be consistent and probably will
be but it's not been yet.
The manifest files in tmp/ have been updated as well, including the
macOS Numbers file.
In the case where we recommend trying the alternate code first, the
lower section is 'Original code' but this was at heading level 3 when
discussion suggests 2 so this was done as well:
sgit -e 's/^### \(Original code\)/## \1/g' '*README.md'
As in:
sgit -e 's/# To run/# To use/g' '*README.md'
This makes consistent the message for how to use the program. 'How to
use' was chosen because one can run a program just by doing './foo' but
that doesn't imply that's how to use it but the purpose of the section
is how to use it.
The use of the markdown trailing whitespace to indicate
line break should NOT be done when the following line is empty.
This removes such improper use of whitespace in README.md files.
As the original entry is too fast for modern systems I have (after
discussion with Landon) made the build and try sections refer to
'birken.alt' instead of the original entry. The 'alternate code' section
was changed to 'original code' and it refers to 'birken' instead.
This is a rare case where the reversal of alt (in this case provided by
me) and the original is valuable.
There are still some other entries, I believe, where this will be useful
to do as well and for the same reason as this entry: it goes too fast in
modern systems.
The demo.sh script that I wrote now defaults to birken.alt.
Minor fixes to thanks-for-fixes.md wrt this entry.
The fix thank you's have been moved from `README.md` to
`thanks-for-fixes.md`.
**WARNING**: Some mistakes may have been made in doing this.
We presume later changes by others will correct any issues.
The `CONTRIBUTING.md` was renamed `how-to-enter.md`.
A 3rd line of links was added to top level html such as
`contact.html`, `index.html`, `judges.html`, `winners.html`,
and `years.html`.
Improved blank line use in a number (but not all) `README.md` files.
The alt version is based on the author's suggestion but like I've done
with the others (sometimes based on author's suggestions, sometimes not)
where usleep() is used I made it configurable at compile time.
Added demo.sh which cycles through all the text files provided, noting
prior to running the command what is about to be run, to show them all.
Note that if someone were to put in an invalid text file in the
directory there might be a problem. Script removes (in message) the
'.txt$' and capitalises the word. In some cases it changes the text to
be two words. Script passes shellcheck. This script allows one to use
the alt version as well; the try section of the README.md shows this
happening.
Format fix and added links (quite a few - I have very fond memories of
the games from the 1980s!) to the games referenced.
Updated .gitignore.
There were many many README.md files with the wrong heading level for
different sections. These have been changed.
To help go through the changes it should be noted I used sgit and also
here is what is changed:
The 'Try', 'To build' and 'To run' lines have two '#'s. Some had one and
others had three.
An exception is that in 1984/anonymous/README.md for the alternative
code that had three '#'s. This is not consistent yet and it might be
that only two are desired. But for now that one at least has three.
Cody Boone Ferguson