We quasi-canonicalized markdown links to FAQ entries.
**IMPORTANT NOTE**: This is a useful step in completing issue #2417. This commit is consistent with the top level TODO comment requirements. Nevertheless, this changes made by this commit needs to be examined and in some cases improved.
A link to an FAQ entry is of the form:
```
FAQ on "[the link text](....faq.html#string)"
FAQ on "[the link text](....faq.html#string)"
```
The "FAQ" is at the start of the line, or in rare cases is preceded only by whitespace.
The reference to the FAQ starts outside of the markdown link with the string **FAQ ON "**.
After the markdown link is a **"** followed by either the end of line or a single punctuation character such as a period or comma.
We reduced the size of "the link text" that refer to an FAQ to at most 3 words. In some cases the sentence and/or text surrounding the markdown link to a FAQ may need to be further adjusted to better accommodate this new style.
**IMPORTANT NOTE**: References to a FAQ entry are on a separate line.
p.s. When linking to the `faq.html` file itself, we use markdown of the form "`the [IOCCC FAQ](..../faq.html)`" and place the word "the" outside of the "IOCCC FAQ" link text.
Given the above system (and because references to an FAQ entry is on a separate line), the following command shows links to FAQ entries, sorted by FAQ entry "link #name" so that one may evaluate the way a given FAQ entry is referenced:
```sh
find * -name '*.md' -print0 | xargs0 grep -E '^[[:space:]]*FAQ on "' | sed -e 's/^\([^:]*\):\( *FAQ on "[^#]*\)#\([^)]*\)\()".*\)$/#\3\t\1\t\2#\3\4/' | sort
```
The above command shows the value of consistency when it comes to FAQ references.
**NOTE**: There are a few differences on how a given FAQ is references. That is probably OK as there is NOT an "total mandate" that all references to a given FAQ must have the same "link text" for example. On the other hand if references to a given FAQ can be identical, that might be helpful. We are certain that in some contexts the "link text" might need to change.
Should we decide to change the way FAQ are referenced, we will be able to modify identify and modify them with greater ease.'
Examine the changes made by this commit and adjust and/or improve as needed.
Performed `make www` to accomplish the above and to test under macOS.
We add the following level-3 header to help people identify text
they may wish to skip if they wish for a greater challenge:
```
```
After that notice we add:
```
**If you want a greater challenge, don't read any further**:
just try to understand the program via the source.
If you get stuck, come back and read below for additional hints and information.
```
And sometimes follow with:
```
```
Or sometimes follow with:
```
```
Where the alt code impacts a "greater challenge", we add instead:
```
**If you want a greater challenge, don't read any further**:
just try to understand the program without looking at the Alternate code.
If you get stuck, come back and look at the Alternate code.
```
And where a given command impacts a "greater challenge", we add instead:
```
**If you want a greater challenge, don't read any further**:
just try to understand the program without running the command below.
If you get stuck, come back and run the following command:
```
Perform `make www` to perform the above and test under macOS.
In most cases the word was changed to 'obfuscation' as it was about
obfuscation, not deobfuscation. In some cases like 1995/leo since the
file was (in 1995/leo) about a secret switch it was changed to
'secret.md' (and 'secret.html') but there were others like that as well.
One entry had the words 'spoiling the size rule' but this had been
changed to 'deobfuscating the size rule' which was obviously wrong.
In the latter YYYY/README.md files the judges had written after some
entries (brief summaries) '...
...We'll stop spouting spoilers now. Have fun exploring all the
entries!
but that was changed to:
...We'll stop spouting deobfuscation information now. Have fun
exploring all the entries!
which wasn't really about deobfuscation but just a brief summary of what
the entries did.
And in the most problematic case (at least for me :-), 2018/ferguson) I
had put a joke in:
... but it's the only Easter egg I won't spoil
but it was changed to 'won't deobfuscate' which not only is not what it
is but it spoilt the joke.
In some cases the word was changed back to 'SPOILER' (or similar) but in
most cases not. I believe it should be better now. There are some
caveats, however, as below.
Although make find_missing_links is okay I do not remember if this will
catch links that refer to '%%REPO_URL%%' or other pandoc tokens. This
means I might have to go back to some earlier years to verify links are
okay. That should not take that much time I hope.
It might also be that some wording can still be improved some but it is
hoped this will be discovered when checking links and looking over the
manifest (which obviously changed).
There are many fixes made but a few questions remain so when I reach
those years I will address those then. Unfortunately, due to
infrastructure work right now, this is all I can say even though there
are a number of things I'd like to say.
While not strictly necessary, replacing the two ASCII tab characters
in the markdown copyright comment makes it easier to detect problematic
TAB indentation within markdown files.
After this commit, only 90 markdown files have leading ASCII TAB
characters. And again, while not strictly necessary, we can consider
running expand on those 90 markdown files to see what effect that
might have on the HTML files they produce.
Replace leading ASCII TAB characters with multiples of 8 ASCII SPACE
characters (the default action of the `expand(1)` tool) might have
an negative effect on some HTML formatting where **hack-a-round**
formatting was attempted to fix broken indentation caused by
problematic ASCII TAB characters.
Think of this as a baseline for evaluating leading
TAB characters within markdown files.
TODO: Consider either using `expand(1)` to replace leading ASCII
TAB characters with multiples of 8 ASCII SPACE characters AND/OR
modifying the appropriate `bin` tool to convert leading ASCII TAB
characters into multiples of 8 ASCII SPACE characters.
This fixes an inconsistency in case. The spreadsheet in tmp,
year_prize.numbers and the year_prize.csv files were updated also (with
the ./fix_csv.sh run under tmp/).
There was no need to manually update the index.html, any other html
files or .entry.json files as I used sgit(1) to change the case.
Added `bin/find-missing-links.sh` tool to check for
markdown links to missing local files.
Regarding the missing link tool:
```
Here be extended regular expression magic dragons! :-)
```
Added `make find_missing_links` to the top level Makefile.
Added `make find_missing_links` to `make www` and `make quick_www`.
Ran `make www` to perform the above.
TODO: Fix markdown links to missing local files.
Fixed stuff we broke by mistake, previously.
Ran `make www` to perform the above.
TODO: Fix stuff we broke by mistake doing the above.
TODO: Fix more broken markdown links.
All code blocks in markdown have been intended by at least 4 spaces.
We add `--tab-stop=8` to all `pandoc(1)` executions in order to set
a better tab stop indentation, especially for tab intended code blocks.
Changed `bin/pandoc-wrapper.sh` VERSION from "1.5.3 2024-03-26"
to "1.6 2024-03-31".
Fixed `1991/brnstnd/sorta.README.md` so that the sorta code
is code blocks.
Removed unneeded paragraph group in copyright in `inc/footer.default.html`.
Fixed excess whitespace after list Author on entry `index.html` page.
Changed `bin/output-index-author.sh` VERSION from "1.5.2 2024-03-26"
to "1.6 2024-03-31".
Performed `make www` to perform the above and test under macOS.
TODO: Fix the problem of the initial line of code being extra intended.
TODO: Fix excess whitespace around code that is inline.
The inc/footer.default.html now has a common Copyright and CC BY-SA
4.0 License section for all generated HTML files.
All markdown files have a similar Copyright and CC
at the bottom in the form of an HTML comment.
It should be pointed out that there are a few inconsistencies as noted
below.
In some years the title of entries that were explicitly listed were
linked to but as the README.md files no longer have the title it was not
as easy to locate the title (I could go back in archive/historic and I
did in some cases but I was trying to hurry this up to close#3).
It's most likely that some have backticks surrounding certain words like
gcc or something else but not in all files. An example that might be
there is '#define'.
Some wording is different. Usually this is due to the original wording
which I did not think was good to change. There might be other cases
that were missed as well. One thing is that comes to mind is that in
some README.md files it refers to the Makefile to check for build
instructions, in others it refers to the index.html file and in some it
refers to both. But the index.html has how to build so they should
probably all say index.html and not refer to the Makefile. This was also
done in a rush.
There might be other inconsistencies or things that might want to be
fixed but whether it's worth it given is unclear at this time. It can be
argued that the reference to the Makefiles for build instructions is a
historical comment to keep there as an example of why not to change it.
There were other things I noticed that I could not address or did not
feel were necessary but with this commit an important task is can likely
be considered done unless it is decided that some of these should be
fixed or if looking at the rendered output there is a problem.
Entry source is now prog.c for IOCCC years 2014 thru 2020,
or is now dirname.c IOCCC years 1984 thru 2013.
To achieve this state, we renamed the following:
renamed: 2004/hibachi/src/hibachi.c -> 2004/hibachi/hibachi.c
renamed: 2012/omoikane/nyaruko.alt.c -> 2012/omoikane/omoikane.alt.c
renamed: 2012/omoikane/nyaruko.alt2.c -> 2012/omoikane/omoikane.alt2.c
renamed: 2012/omoikane/nyaruko.c -> 2012/omoikane/omoikane.c
renamed: 2012/omoikane/nyaruko.orig.c -> 2012/omoikane/omoikane.orig.c
Modified `bin/subst.entry-index.sh` to add to entry `index.html` file,
links to the `Makefile` and the _C code_ to the top navigation bar.
Changed `bin/subst.entry-index.sh` VERSION from "1.2.2 2024-02-25"
to "1.3 2024-03-02".
Moved printing the Inventory link in the top navigation bar
from `bin/subst.entry-navbar.awk` to `bin/subst.entry-index.sh`.
Changed `bin/subst.entry-navbar.awk` VERSION from "1.0.1 2024-02-23"
to "1.1 2024-03-02".
Moved printing the Inventory link in the top navigation bar
from `bin/subst.year-navbar.awk` to `bin/subst.year-index.sh`.
Changed `bin/subst.year-index.sh` VERSION from "1.0 2024-02-11"
to "1.1 2024-03-02".
Changed `bin/subst.year-navbar.awk` VERSION from "1.0 2024-02-11"
to "1.1 2024-03-02".
Added location names (both default and common) to `author.html`.
Changed `tmp/gen_author_json.sh` VERSION from "1.0 2023-06-06"
to "1.1 2024-03-04".
Added location names (both default and common) to `author.html`.
Changed `bin/gen-authors.sh` VERSION from "1.2 2024-03-09"
to "1.3 2024-03-04".
The manifest and the resulting `.entry.json` files have been changed
for `2004/hibachi` and `2012/omoikane`.
The Makefiles for `2004/hibachi` and `2012/omoikane` copy the
source file into the "previously used location". The `make clobber`
rule removes the copied source. The `.gitignore` files have been
updated accordingly.
Improved how the concept of IOCCC terms _entry_, _author_ and _submission_ are
used in markdown files.
Links to markdown files (files ending in .md) within the repo were
changed to link to HTML files (files ending in .html). Special cases
where `README.md` became `index.html` were modified accordingly.
Fixed URL for `bugs.html` in Makefile comments.
Fixed name of `bin/sgi.sh` referenced in comments in `.gitignore` files.
Links to locations within the repo are now relative. For example a
link to `/contact.html` may become `../contact.html' or '../../contact.html`
depending on the directory level of the markdown file.
Nearly all links with absolute URLs under _https://www.ioccc.org_
or `https://ioccc-src.github.io/temp-test-ioccc_ have been changed to
relative paths within the repo. Some exceptions to this (such as
referring to a GitHub repo) were preserved.
Fixed a number of inside `faq.md` and `bugs.md`.
Added HTML name tags (in the form of an _entry_id_) for each entry
referenced in `bugs.md`. Fixed links from outside of `bugs.html`
into `bugs.html` accordingly.
Where FAQ entries are referenced, a named tag is used so that if a
FAQ is ever renumbered, links outside of `faq.html` will still work.
Changed the _inventory_order_ of a compressed tarball from _300_
to _100000_. While this may have been done for the manifest,
this changed had not yet been propagated into the `.entry.json` files.
Links to web sites that were in the for <URL> are now [URL](URL).
Performed `name www` to process all of the above.
Improved format of `authors.html`. Full names are now bold.
Location codes are now links back into `location.html` and
location names (both default and common) are now italics.
Added _author_handle_ each author.
Changed `bin/gen-authors.sh` VERSION from "1.1 2024-02-25"
to "1.2 2024-03-09".
Improved format of `location.html` as location codes are now bold,
author counts in a given location are now bold, and location names
(both default and common) are now italics.
Changed `bin/gen-location.sh` VERSION from "1.0.1 2024-02-23"
to "1.1 2024-03-04".
Added italic location name after location code in entry
`index.html` files.
Changed `bin/output-index-author.sh` VERSION from "1.4.1 2024-02-23"
to "1.5 2024-03-04".
Added _Location of authors_ to the sidebar as a link to `location.html`.
TODO: While nearly all of the above mentioned changes are likely correct,
they likely introduced a few errors that need correcting.
We add to the top level Makefile, some initial rules that
will facilitate the building of HTML content.
The `bin/md2html.sh` tool as been updated to output HTML comments
about the output during HTML phases 20, 21 and 22.
All entry `index.html` files were updated with some additional HTML
comments as a result of the above. The top level `location.html`,
`years.html` and `authors.html` have had HTML comments added also
a result.
Sorry (tm Canada 🇨🇦) for the mass update of entry `index.html` files.
Hopefully the times when all of them (often) need to be updated
will soon draw to a close.
For the top level and year level README.md, where email are found,
a note was added to the effect that email addresses found above are
for historical purposes only, and should not be used today.
Old references to asking for fixes, comments, when content was used,
and next contest links were replaced with a general reference to the FAQ.
Harmonized the Copyright and License and copyright dates.
Now using Creative Commons "CC BY-SA 4.0 DEED Attribution-ShareAlike 4.0
International".
The above Creative Commons will become the standard for the IOCCC.
Replaced old `png/by-sa-3.0-88x31.png` with a new ` png/by-sa.88x31.png` icon.
Updated the top level HTML files to use the license.
That is
sgit -e 's/Use make\( to compile\)/Use `make`\1/g' -e \
's/makefile/Makefile/g' '20[0-9][0-9]/README.md'
This way 'make' is formatted with a code block (or whatever the term is
in markdown terminology) and 'makefile' is changed to Makefile.
BTW: fun fact: Landon was part of the recommendation of naming Makefiles
Makefile instead of makefile which is shown in the man page make(1):
Normally you should call your makefile either makefile or Makefile.
(We recommend Makefile because it appears prominently near the
beginning of a directory listing, right near other important files
such as README.) The first name checked, GNUmakefile, is not
recommended for most makefiles. You should use this name if you
have a makefile that is specific to GNU Make, and will not be
understood by other versions of make. If makefile is '-', the
standard input is read.
For some reason this was missing from the repository. I was certain that
there was one so I looked at my archive and found in the winner preview
repo for 2018 that there was indeed a README file (README.markdown).
This has been added as 2018/README.md. It felt important that this was
added back.
I did NOT update the 2018 archive tarball as I'm not sure what to even
call it - perhaps just README.markdown - but also because I'm not sure
what the status is of my archive/2018 is.
I fixed the formatting to match the style that is being used in this
repo.
Landon Curt Noll