Amongst the changes here is that we do not need to have the hex or html
code (numbers) for open and close parentheses (in links) as there are
names. '(' is & followed by lpar; and the ')' is the same but 'rpar;'
instead. This makes it easier to remember and type and it generates the
same html as well (they are all valid). Now the markdown files are
consistent in this (in some cases hex was used and in others the html
code).
Although many markdown files were updated no html files needed to be
updated as it generates the same html. Even so I ran the appropriate
rules to do so just to verify this.
Given how problematic leading tabs in markdown files can be,
we have expanded all leading tabs in markdown files by:
```sh
find * -type f -name '*.md' -print |
while read -r file; do
rm -f "$file.tmp" ;
expand < "$file" > "$file.tmp" ;
mv -f -v "$file.tmp" "$file" ;
done
```
Given the previous changes to `bin/pandoc-wrapper.sh` and other recent
commits and recent pull requests, the were were **NO** changes to
any HTML files. This is a **good thing** as the expression goes.
No there are no leading tabs in any markdown files.
A check to catch any re-introduction of leading tabs
into any markdown file is on the way.
BTW: We do not have anything against leading tabs in files,
even though we have had to deal with their impact on forming
HTML from markdown files (as well as the calc source code).
It is just that this is one of those cases where tabs conflict
(sometimes caused by people wanting to change the classic
8-space tab model) with a desired outcome.
Perform `make www` to perform the above and test under macOS.
While not strictly necessary, replacing the two ASCII tab characters
in the markdown copyright comment makes it easier to detect problematic
TAB indentation within markdown files.
After this commit, only 90 markdown files have leading ASCII TAB
characters. And again, while not strictly necessary, we can consider
running expand on those 90 markdown files to see what effect that
might have on the HTML files they produce.
Replace leading ASCII TAB characters with multiples of 8 ASCII SPACE
characters (the default action of the `expand(1)` tool) might have
an negative effect on some HTML formatting where **hack-a-round**
formatting was attempted to fix broken indentation caused by
problematic ASCII TAB characters.
Think of this as a baseline for evaluating leading
TAB characters within markdown files.
TODO: Consider either using `expand(1)` to replace leading ASCII
TAB characters with multiples of 8 ASCII SPACE characters AND/OR
modifying the appropriate `bin` tool to convert leading ASCII TAB
characters into multiples of 8 ASCII SPACE characters.
Added `bin/find-missing-links.sh` tool to check for
markdown links to missing local files.
Regarding the missing link tool:
```
Here be extended regular expression magic dragons! :-)
```
Added `make find_missing_links` to the top level Makefile.
Added `make find_missing_links` to `make www` and `make quick_www`.
Ran `make www` to perform the above.
TODO: Fix markdown links to missing local files.
We added a space between the markdown triple code mark
and language that was enclosed in HTML comments.
So a line of the form:
````
```<!---c--->
````
became:
````
``` <!---c--->
````
This was done to **help** some code see that the HTML comment
string was not a markdown code specifier. Not all code
understands this after this changed. For example, `pandoc(1)`
still forms HTML classes of the form "<!---c-->"
when it encounters the above mentioned change.
We also fixed a problem with `2019/dogon/README.md` regarding
a markdown code block.
We also fixed a problem with `2020/yang/README.md` regarding
a markdown code block.
When language is specified in a markdown code block such as:
````
```c
printf("Hello, world!\n");
```
````
is used, the resulting HTML as produced by `pandoc(1)` combined
with our revised `ioccc.css` is not intent the code block well.
A temporary "_hack-a-round_" is to turn the "markdown code language
specifier" into an HTML comment. For example:
````
```<!---c-->
printf("Hello, world!\n");
```
````
This commits turns off existing markdown code language specifiers
for now, while preserving our ability to restore them in the future
when a better "_hack-a-round_" to the "markdown code language
specifier" problem is found.
The HTML impact if this "_hack-a-round_" is to produce HTML that
looks like this:
```
<pre class="<!---c-->"><code> .. </code></pre>
```
We might be able to create a complex set of classes for each markdown
code language (there won't be very many) in `ioccc.css`, or we might
find a more general CSS (or maybe `pandoc(1)`?) solution.
For now, this hack-a-round will have to do.
All code blocks in markdown have been intended by at least 4 spaces.
We add `--tab-stop=8` to all `pandoc(1)` executions in order to set
a better tab stop indentation, especially for tab intended code blocks.
Changed `bin/pandoc-wrapper.sh` VERSION from "1.5.3 2024-03-26"
to "1.6 2024-03-31".
Fixed `1991/brnstnd/sorta.README.md` so that the sorta code
is code blocks.
Removed unneeded paragraph group in copyright in `inc/footer.default.html`.
Fixed excess whitespace after list Author on entry `index.html` page.
Changed `bin/output-index-author.sh` VERSION from "1.5.2 2024-03-26"
to "1.6 2024-03-31".
Performed `make www` to perform the above and test under macOS.
TODO: Fix the problem of the initial line of code being extra intended.
TODO: Fix excess whitespace around code that is inline.
The inc/footer.default.html now has a common Copyright and CC BY-SA
4.0 License section for all generated HTML files.
All markdown files have a similar Copyright and CC
at the bottom in the form of an HTML comment.
The run.sh script was fixed to work. It did not work because it had a
command that does not even exist ('tempfile') and even after that was
resolved there was another problem to be resolved.
The Makefile rule make python runs the python.sh script but it sets a
trap so one can exit that script but not exit everything (see below).
The python3.sh script is what python.sh is but for the make rule python3
and it works in the same way. The try.sh script runs all of these
scripts as well as the commands suggested by the judges.
The README.md file has been format/typo checked. For the link (twice
referenced) that has flashing lights (and quite a few at that) I put a
warning in parentheses for those who are (like me) sensitive to it (more
important for some people with epilepsy, depending on how sensitive they
are, maybe, but I hate flashing text and lights and so do many other
people).
As requested on GitHub: a tool that will be written, readme2index, will,
as explained:
'... will take the converted HTML from the README.md markdown and
inject it into an HTML template. Things such title, award one and
author information will be injected into the HTML page ahead of the
HTML that was converted from the README.md markdown. Without going
into details of HOW at this time, the result will be a coherent HTML
index.html page with the winner title / award, winning author
information, and important file links come from other sources and
NOT from the README.md file.
The text from the 1st award line, thru the authorship information,
and up to but not including the "## To build:" line in the README.md
file will just get in the way. Moreover authors might be tempted to
try and maintain that top of README.md text instead of working with
the author/_author_handle_.json and winner .winner.json files.
This was done with my[0] sgit(1) (https://github.com/xexyl/sgit) tool like:
sgit -o -n -e '/^## To build:/,$p' '[12][0-9][0-9][0-9]/*/README.md'
[0] Is that shameless self-promotion? I don't know but I don't care: it
is generally a very useful tool and has been used in other repos too.
Besides, I've done it many times before and it's a great example that I
will be adding to the README.md file of the tool, one I hadn't thought
of doing.
As in:
sgit -e 's/# To run/# To use/g' '*README.md'
This makes consistent the message for how to use the program. 'How to
use' was chosen because one can run a program just by doing './foo' but
that doesn't imply that's how to use it but the purpose of the section
is how to use it.
The use of the markdown trailing whitespace to indicate
line break should NOT be done when the following line is empty.
This removes such improper use of whitespace in README.md files.
These were found on Yusuke Endoh's analysis of all the IOCCC winning
entries. I kept the ASCII art he had for the comments but his comments
for the entry seem like a good idea to include especially as he wrote
them himself and they add to the entry itself.
The try section actually triggers a long (or infinite? .. didn't check)
loop so I note this and also say how to break out of it (though most
would probably know how).
There were many many README.md files with the wrong heading level for
different sections. These have been changed.
To help go through the changes it should be noted I used sgit and also
here is what is changed:
The 'Try', 'To build' and 'To run' lines have two '#'s. Some had one and
others had three.
An exception is that in 1984/anonymous/README.md for the alternative
code that had three '#'s. This is not consistent yet and it might be
that only two are desired. But for now that one at least has three.
Cody Boone Ferguson