In the case of two which had an abstract (.entry.json file) that
includes one (in one case) '<' or two (in another case) '<'s a markdown
code block had to be used as otherwise the abstract would have to have a
< which looks even worse. This is not ideal but if we want it to pass
lint this is what has to be done. Use of json \uxxxx won't work as that
encodes it to < literally.
In the case of 2018/burton[12] the author had a section called Coda.
This conflicted with the problem that all generated html files have such
a section. To fix this problem I renamed it 'Final remarks'. Not ideal
but at least it now passes as valid.
There were a number of different kinds of problems and in one case the
symbols < and > could be fixed by changing it to a code block (which it
should have been anyway) - that was 2020/ferguson1 I think.
In most cases the word was changed to 'obfuscation' as it was about
obfuscation, not deobfuscation. In some cases like 1995/leo since the
file was (in 1995/leo) about a secret switch it was changed to
'secret.md' (and 'secret.html') but there were others like that as well.
One entry had the words 'spoiling the size rule' but this had been
changed to 'deobfuscating the size rule' which was obviously wrong.
In the latter YYYY/README.md files the judges had written after some
entries (brief summaries) '...
...We'll stop spouting spoilers now. Have fun exploring all the
entries!
but that was changed to:
...We'll stop spouting deobfuscation information now. Have fun
exploring all the entries!
which wasn't really about deobfuscation but just a brief summary of what
the entries did.
And in the most problematic case (at least for me :-), 2018/ferguson) I
had put a joke in:
... but it's the only Easter egg I won't spoil
but it was changed to 'won't deobfuscate' which not only is not what it
is but it spoilt the joke.
In some cases the word was changed back to 'SPOILER' (or similar) but in
most cases not. I believe it should be better now. There are some
caveats, however, as below.
Although make find_missing_links is okay I do not remember if this will
catch links that refer to '%%REPO_URL%%' or other pandoc tokens. This
means I might have to go back to some earlier years to verify links are
okay. That should not take that much time I hope.
It might also be that some wording can still be improved some but it is
hoped this will be discovered when checking links and looking over the
manifest (which obviously changed).
Given how problematic leading tabs in markdown files can be,
we have expanded all leading tabs in markdown files by:
```sh
find * -type f -name '*.md' -print |
while read -r file; do
rm -f "$file.tmp" ;
expand < "$file" > "$file.tmp" ;
mv -f -v "$file.tmp" "$file" ;
done
```
Given the previous changes to `bin/pandoc-wrapper.sh` and other recent
commits and recent pull requests, the were were **NO** changes to
any HTML files. This is a **good thing** as the expression goes.
No there are no leading tabs in any markdown files.
A check to catch any re-introduction of leading tabs
into any markdown file is on the way.
BTW: We do not have anything against leading tabs in files,
even though we have had to deal with their impact on forming
HTML from markdown files (as well as the calc source code).
It is just that this is one of those cases where tabs conflict
(sometimes caused by people wanting to change the classic
8-space tab model) with a desired outcome.
Perform `make www` to perform the above and test under macOS.
While not strictly necessary, replacing the two ASCII tab characters
in the markdown copyright comment makes it easier to detect problematic
TAB indentation within markdown files.
After this commit, only 90 markdown files have leading ASCII TAB
characters. And again, while not strictly necessary, we can consider
running expand on those 90 markdown files to see what effect that
might have on the HTML files they produce.
Replace leading ASCII TAB characters with multiples of 8 ASCII SPACE
characters (the default action of the `expand(1)` tool) might have
an negative effect on some HTML formatting where **hack-a-round**
formatting was attempted to fix broken indentation caused by
problematic ASCII TAB characters.
Think of this as a baseline for evaluating leading
TAB characters within markdown files.
TODO: Consider either using `expand(1)` to replace leading ASCII
TAB characters with multiples of 8 ASCII SPACE characters AND/OR
modifying the appropriate `bin` tool to convert leading ASCII TAB
characters into multiples of 8 ASCII SPACE characters.
We have fixed cases where markdown code blocks were not properly intended.
Updated `markdown.md` to discuss how markdown code blocks should be indented
and how blank lines should follow a markdown code block.
We used this shell script to find problematic code blocks:
```sh
find . -name '*.md' ! -name markdown.md -print | xargs pcregrep -M '^``.*\n[^|`\n \t]'
```
Ran `make www` to perform the above.
Fixed stuff we broke by mistake, previously.
Ran `make www` to perform the above.
TODO: Fix stuff we broke by mistake doing the above.
TODO: Fix more broken markdown links.
We fix more markdown links in markdown files that refer to files
internally to the web site.
Added tmp tools to find and print various markdown links:
* `tmp/md-links.sh` - print all markdown links
* `tmp/md-token-links.sh` - print all markdown links that start with a **%%TOKEN%%**
* `tmp/md-local-links.sh` - print all markdown links to a local file
* `tmp/md-link-paths.sh` - print local file paths referenced in markdown links
Fixed a number of markdown formatting problems with `thanks-for-help.md`.
Fixed markdown links to files in `thanks-for-help.md`. Improved
heading levels in `thanks-for-help.md`, and made entry sections consistent.
Changed all markdown links that end in "))" to end in a better way.
Explained in `markdown.md` why we are avoiding markdown links that
end in "))".
Ran `make www` to perform the above.
TODO: Fix stuff we broke by mistake doing the above.
TODO: Fix more broken markdown links.
In cases that are **outside of a markdown code block**,
a markdown line with ending in a tailing "\" can generate
problematic HTML.
We certain trailing backslashes outside of a markdown code block
with "<br>" HTML elements, or in some cases eliminated the
need for a trailing backslash.
In a few cases some unnecessary trailing backslashes inside
of a markdown code block were removed.
The following markdown files were changed in this commit:
```
1990/dds/README.md
1990/jaw/README.md
1991/ant/README.md
1991/rince/README.md
1991/westley/README.md
1992/vern/README.md
1992/westley/README.md
1998/schweikh1/README.md
2004/anonymous/README.md
2005/sykes/README.md
2006/toledo2/README.md
2011/toledo/README.md
2012/endoh2/README.md
2012/tromp/README.md
2013/robison/README.md
2015/hou/README.md
2015/howe/README.md
2015/schweikhardt/README.md
2018/burton1/README.md
2018/burton2/README.md
2018/ferguson/README.md
2018/vokes/README.md
2020/ferguson1/README.md
```
Performed `make www` to test these changes.
We added a space between the markdown triple code mark
and language that was enclosed in HTML comments.
So a line of the form:
````
```<!---c--->
````
became:
````
``` <!---c--->
````
This was done to **help** some code see that the HTML comment
string was not a markdown code specifier. Not all code
understands this after this changed. For example, `pandoc(1)`
still forms HTML classes of the form "<!---c-->"
when it encounters the above mentioned change.
We also fixed a problem with `2019/dogon/README.md` regarding
a markdown code block.
We also fixed a problem with `2020/yang/README.md` regarding
a markdown code block.
When language is specified in a markdown code block such as:
````
```c
printf("Hello, world!\n");
```
````
is used, the resulting HTML as produced by `pandoc(1)` combined
with our revised `ioccc.css` is not intent the code block well.
A temporary "_hack-a-round_" is to turn the "markdown code language
specifier" into an HTML comment. For example:
````
```<!---c-->
printf("Hello, world!\n");
```
````
This commits turns off existing markdown code language specifiers
for now, while preserving our ability to restore them in the future
when a better "_hack-a-round_" to the "markdown code language
specifier" problem is found.
The HTML impact if this "_hack-a-round_" is to produce HTML that
looks like this:
```
<pre class="<!---c-->"><code> .. </code></pre>
```
We might be able to create a complex set of classes for each markdown
code language (there won't be very many) in `ioccc.css`, or we might
find a more general CSS (or maybe `pandoc(1)`?) solution.
For now, this hack-a-round will have to do.
All code blocks in markdown have been intended by at least 4 spaces.
We add `--tab-stop=8` to all `pandoc(1)` executions in order to set
a better tab stop indentation, especially for tab intended code blocks.
Changed `bin/pandoc-wrapper.sh` VERSION from "1.5.3 2024-03-26"
to "1.6 2024-03-31".
Fixed `1991/brnstnd/sorta.README.md` so that the sorta code
is code blocks.
Removed unneeded paragraph group in copyright in `inc/footer.default.html`.
Fixed excess whitespace after list Author on entry `index.html` page.
Changed `bin/output-index-author.sh` VERSION from "1.5.2 2024-03-26"
to "1.6 2024-03-31".
Performed `make www` to perform the above and test under macOS.
TODO: Fix the problem of the initial line of code being extra intended.
TODO: Fix excess whitespace around code that is inline.
The inc/footer.default.html now has a common Copyright and CC BY-SA
4.0 License section for all generated HTML files.
All markdown files have a similar Copyright and CC
at the bottom in the form of an HTML comment.
Entry source is now prog.c for IOCCC years 2014 thru 2020,
or is now dirname.c IOCCC years 1984 thru 2013.
To achieve this state, we renamed the following:
renamed: 2004/hibachi/src/hibachi.c -> 2004/hibachi/hibachi.c
renamed: 2012/omoikane/nyaruko.alt.c -> 2012/omoikane/omoikane.alt.c
renamed: 2012/omoikane/nyaruko.alt2.c -> 2012/omoikane/omoikane.alt2.c
renamed: 2012/omoikane/nyaruko.c -> 2012/omoikane/omoikane.c
renamed: 2012/omoikane/nyaruko.orig.c -> 2012/omoikane/omoikane.orig.c
Modified `bin/subst.entry-index.sh` to add to entry `index.html` file,
links to the `Makefile` and the _C code_ to the top navigation bar.
Changed `bin/subst.entry-index.sh` VERSION from "1.2.2 2024-02-25"
to "1.3 2024-03-02".
Moved printing the Inventory link in the top navigation bar
from `bin/subst.entry-navbar.awk` to `bin/subst.entry-index.sh`.
Changed `bin/subst.entry-navbar.awk` VERSION from "1.0.1 2024-02-23"
to "1.1 2024-03-02".
Moved printing the Inventory link in the top navigation bar
from `bin/subst.year-navbar.awk` to `bin/subst.year-index.sh`.
Changed `bin/subst.year-index.sh` VERSION from "1.0 2024-02-11"
to "1.1 2024-03-02".
Changed `bin/subst.year-navbar.awk` VERSION from "1.0 2024-02-11"
to "1.1 2024-03-02".
Added location names (both default and common) to `author.html`.
Changed `tmp/gen_author_json.sh` VERSION from "1.0 2023-06-06"
to "1.1 2024-03-04".
Added location names (both default and common) to `author.html`.
Changed `bin/gen-authors.sh` VERSION from "1.2 2024-03-09"
to "1.3 2024-03-04".
The manifest and the resulting `.entry.json` files have been changed
for `2004/hibachi` and `2012/omoikane`.
The Makefiles for `2004/hibachi` and `2012/omoikane` copy the
source file into the "previously used location". The `make clobber`
rule removes the copied source. The `.gitignore` files have been
updated accordingly.
Improved how the concept of IOCCC terms _entry_, _author_ and _submission_ are
used in markdown files.
Links to markdown files (files ending in .md) within the repo were
changed to link to HTML files (files ending in .html). Special cases
where `README.md` became `index.html` were modified accordingly.
Fixed URL for `bugs.html` in Makefile comments.
Fixed name of `bin/sgi.sh` referenced in comments in `.gitignore` files.
Links to locations within the repo are now relative. For example a
link to `/contact.html` may become `../contact.html' or '../../contact.html`
depending on the directory level of the markdown file.
Nearly all links with absolute URLs under _https://www.ioccc.org_
or `https://ioccc-src.github.io/temp-test-ioccc_ have been changed to
relative paths within the repo. Some exceptions to this (such as
referring to a GitHub repo) were preserved.
Fixed a number of inside `faq.md` and `bugs.md`.
Added HTML name tags (in the form of an _entry_id_) for each entry
referenced in `bugs.md`. Fixed links from outside of `bugs.html`
into `bugs.html` accordingly.
Where FAQ entries are referenced, a named tag is used so that if a
FAQ is ever renumbered, links outside of `faq.html` will still work.
Changed the _inventory_order_ of a compressed tarball from _300_
to _100000_. While this may have been done for the manifest,
this changed had not yet been propagated into the `.entry.json` files.
Links to web sites that were in the for <URL> are now [URL](URL).
Performed `name www` to process all of the above.
Improved format of `authors.html`. Full names are now bold.
Location codes are now links back into `location.html` and
location names (both default and common) are now italics.
Added _author_handle_ each author.
Changed `bin/gen-authors.sh` VERSION from "1.1 2024-02-25"
to "1.2 2024-03-09".
Improved format of `location.html` as location codes are now bold,
author counts in a given location are now bold, and location names
(both default and common) are now italics.
Changed `bin/gen-location.sh` VERSION from "1.0.1 2024-02-23"
to "1.1 2024-03-04".
Added italic location name after location code in entry
`index.html` files.
Changed `bin/output-index-author.sh` VERSION from "1.4.1 2024-02-23"
to "1.5 2024-03-04".
Added _Location of authors_ to the sidebar as a link to `location.html`.
TODO: While nearly all of the above mentioned changes are likely correct,
they likely introduced a few errors that need correcting.
The id.sh and id.alt.sh scripts are (for entry and alt entry that I
submitted to the contest) are for those who want to try and prove that
'"intelligent" design' is real or for those who know better to see how
long it'll take Eric the monkey to type 'EVOLUTION IS A PROVEN FACT'.
These were both added by the judges at time of publication but I moved
them to the try scripts. Now however the id scripts limit to 250000 max
attempts (see below on this change) before giving up to save time (and
to maybe let them move on to the next step, see below also).
The monkey-words.sh and monkey-words.alt.sh are to see how long it is
before the monkey Eric can type 'words' or more likely how long it'll
take before he gives up or falls asleep. I am no longer sure if I added
this or the judges did but I'm pretty sure I did.
As for the max attempts this one might need to be moved to a second alt
version for both but if so I don't know what to name them. This
reconfiguration option was not originally submitted but to show what
will happen when Eric fails it was added. It would normally be put in
prog.alt.c but prog.alt.c already exists: a simpler keyboard. But if the
new feature was moved to prog.alt.c what would prog.alt.c be? Maybe
prog.alt2.c but then what about the simpler keyboard version? This can
be discussed because I am not sure I want it in prog.c and I am not sure
if it should be either as it was not part of the original entry (though
in retrospect it should have been). The try.sh and try.alt.sh scripts
now show what happens when Eric fails where previously one would have to
wait a very long time (max attempts SIZE_MAX - 1 is what it was set to
and still defaults to, being reset to it if it's < 100 which was
arbitrarily selected).
The Makefile has been improved to simplify redefining the macros that
specify how many offspring per generation to have and the max length of
the string (this has also been used in the try.sh and try.alt.sh scripts
if the user says they want to see the undocumented Easter egg).
The test.sh script now uses less(1) so one can look at the output one
page at a time.
The make test rule now has a '@' to silent the command being executed
('./test.sh').
The script had "s surrounding the git ls-files command which turned it
to a single file which of course is wrong.
Ran script again fixing many README.md files that had incorrect number
of blank lines for critical headers.
This will have to be done a final but a good number of files have been
corrected.
The try.sh and try.alt.sh scripts are respectively for the entry and the
alt code. There is a joke in them that is based on what the judges
originally suggested one try.
The weasel.man page was deleted. Instead weasel.1 has had the FILES
section removed (which caused some confusion in another way with
another winner of that year). The spec file will have to be tested again
another time.
I did NOT format / typo check the README.md file. Too much to do for now
and since it's mine I can do it any other time. I'd like to get through
the rest of the entries.
Thus this should complete (for now?) 2018/ferguson.
As requested on GitHub: a tool that will be written, readme2index, will,
as explained:
'... will take the converted HTML from the README.md markdown and
inject it into an HTML template. Things such title, award one and
author information will be injected into the HTML page ahead of the
HTML that was converted from the README.md markdown. Without going
into details of HOW at this time, the result will be a coherent HTML
index.html page with the winner title / award, winning author
information, and important file links come from other sources and
NOT from the README.md file.
The text from the 1st award line, thru the authorship information,
and up to but not including the "## To build:" line in the README.md
file will just get in the way. Moreover authors might be tempted to
try and maintain that top of README.md text instead of working with
the author/_author_handle_.json and winner .winner.json files.
This was done with my[0] sgit(1) (https://github.com/xexyl/sgit) tool like:
sgit -o -n -e '/^## To build:/,$p' '[12][0-9][0-9][0-9]/*/README.md'
[0] Is that shameless self-promotion? I don't know but I don't care: it
is generally a very useful tool and has been used in other repos too.
Besides, I've done it many times before and it's a great example that I
will be adding to the README.md file of the tool, one I hadn't thought
of doing.
Fixed cases where there was a bad trailing backslash.
Improved a few cases where a code block was needed
to highlight some text.
Changed a few cases where a code block needed to
declared as, say, a sh code block.
Fixed a few cases where the winner information was not properly formatted.
Plus a few nits and clarifying text was added.
Change level 3 (###) to level 2 (##):
sgit -e 's/^### \(Alternate code\)/## \1/g' '*README.md'
which is the same as:
sgit -e 's/^### Alternate code/## Alternate code/g' '*README.md'
This is per discussion in GitHub.
As in:
sgit -e 's/# To run/# To use/g' '*README.md'
This makes consistent the message for how to use the program. 'How to
use' was chosen because one can run a program just by doing './foo' but
that doesn't imply that's how to use it but the purpose of the section
is how to use it.
Format changes in the README.md.
Update the test.sh and test-strings.txt files: modify the goodbye
message in the script (for fun) and add some fun strings for it to
search out.
The use of the markdown trailing whitespace to indicate
line break should NOT be done when the following line is empty.
This removes such improper use of whitespace in README.md files.
This is to match the rest of the repo as this truly is an alt version,
not a supplementary program.
Updated README.md to have an 'Alternate code' section as well.
A number of files had to be changed as numerous files referred to
prog-simple.c.
There were many many README.md files with the wrong heading level for
different sections. These have been changed.
To help go through the changes it should be noted I used sgit and also
here is what is changed:
The 'Try', 'To build' and 'To run' lines have two '#'s. Some had one and
others had three.
An exception is that in 1984/anonymous/README.md for the alternative
code that had three '#'s. This is not consistent yet and it might be
that only two are desired. But for now that one at least has three.
Fix test.sh for shellcheck.
Minor fixes to README.md including moving the author information (that
is my information :-) ) to the first column of the file as not having it
prevents links from being generated right. This is a problem for the
other README.md files too and I'll be noting it on GitHub.
Some humour with html <del>..</del>.
Modified portability section to make it a bit simpler and suggest that I
won't be updating the list. I only include the original systems tested
for historical purposes. I won't be updating the list over time as that
would be annoying to do and would just make the already very long
document needlessly longer. It's already been almost 5 years since it
was updated.
Add a string to test-strings.txt.
Warning: these are most likely not the final fixes or updates for my
entries as Landon has pointed out :-) but there shouldn't be many more
for now or hopefully for a long time. Unless I see something I won't
feel the need to fix anything.
Update 2018/burton2/README.md to have my middle name.
Make test.sh +x.
Formatting fixes.
Typo fixes.
Other things as well.
I'm actually aware of some other things that could still be done including
removing some text that is no longer needed (and some that probably is
not needed) but this can come at a later date.
As luck would have it the only entries where this applied were my own.
The links/references to these files have been changed in the files.
An unfortunate problem is that in 2020/ferguson1 there are several
*.markdown files. I will have to go through these and figure out which
ones should be changed to .md and which ones can be removed. This can
happen later but in the meantime the references are to .md. I believe
the only difference is that the .md has the footer added by the judges.
This was a workaround with the fact that I wasn't sure (and still am not
entirely sure) the generation of the html files will work. It might be
that the .markdown files have the footer and the .md files do not but
this can be dealt with later anyway.
Cody Boone Ferguson