#!/usr/bin/env bash
#
# gen-years.sh - create the top level years.html page
#
# Copyright (c) 2024 by Landon Curt Noll.  All Rights Reserved.
#
# .. with very minor improvements in June 2024 by Cody Boone Ferguson.
#
# Permission to use, copy, modify, and distribute this software and
# its documentation for any purpose and without fee is hereby granted,
# provided that the above copyright, this permission notice and text
# this comment, and the disclaimer below appear in all of the following:
#
#       supporting documentation
#       source copies
#       source works derived from this source
#       binaries derived from this source or from derived source
#
# LANDON CURT NOLL DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE,
# INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS. IN NO
# EVENT SHALL LANDON CURT NOLL BE LIABLE FOR ANY SPECIAL, INDIRECT OR
# CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF
# USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR
# OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
# PERFORMANCE OF THIS SOFTWARE.
#
# chongo (Landon Curt Noll, http://www.isthe.com/chongo/index.html) /\oo/\
#
# Share and enjoy! :-)


# firewall - run only with a bash that is version 5.1.8 or later
#
# The "/usr/bin/env bash" command must result in using a bash that
# is version 5.1.8 or later.
#
# We could relax this version and insist on version 4.2 or later.  Versions
# of bash between 4.2 and 5.1.7 might work.  However, to be safe, we will require
# bash version 5.1.8 or later.
#
# WHY 5.1.8 and not 4.2?  This safely is done because macOS Homebrew bash we
# often use is "version 5.2.26(1)-release" or later, and the RHEL Linux bash we
# use often use is "version 5.1.8(1)-release" or later.  These versions are what
# we initially tested.  We recommend you either upgrade bash or install a newer
# version of bash and adjust your $PATH so that "/usr/bin/env bash" finds a bash
# that is version 5.1.8 or later.
#
# NOTE: The macOS shipped, as of 2024 March 15, a version of bash is something like
#	bash "version 3.2.57(1)-release".  That macOS shipped version of bash
#	will NOT work.  For users of macOS we recommend you install Homebrew,
#	(see https://brew.sh), and then run "brew install bash" which will
#	typically install it into /opt/homebrew/bin/bash, and then arrange your $PATH
#	so that "/usr/bin/env bash" finds "/opt/homebrew/bin" (or whatever the
#	Homebrew bash is).
#
# NOTE: And while MacPorts might work, we noticed a number of subtle differences
#	with some of their ported tools to suggest you might be better off
#	with installing Homebrew (see https://brew.sh).  No disrespect is intended
#	to the MacPorts team as they do a commendable job.  Nevertheless we ran
#	into enough differences with MacPorts environments to suggest you
#	might find a better experience with this tool under Homebrew instead.
#
if [[ -z ${BASH_VERSINFO[0]} ||
	 ${BASH_VERSINFO[0]} -lt 5 ||
	 ${BASH_VERSINFO[0]} -eq 5 && ${BASH_VERSINFO[1]} -lt 1 ||
	 ${BASH_VERSINFO[0]} -eq 5 && ${BASH_VERSINFO[1]} -eq 1 && ${BASH_VERSINFO[2]} -lt 8 ]]; then
    echo "$0: ERROR: bash version needs to be >= 5.1.8: $BASH_VERSION" 1>&2
    echo "$0: Warning: bash version >= 4.2 might work but 5.1.8 was the minimum we tested" 1>&2
    echo "$0: Notice: For macOS users: install Homebrew (see https://brew.sh), then run" \
	 ""brew install bash" and then modify your \$PATH so that \"#!/usr/bin/env bash\"" \
	 "finds the Homebrew installed (usually /opt/homebrew/bin/bash) version of bash" 1>&2
    exit 4
fi


# setup bash file matching
#
# We must declare arrays with -ag or -Ag, and we need loops to "export" modified variables.
# This requires a bash with a version 4.2 or later.  See the larger comment above about bash versions.
#
shopt -s nullglob	# enable expanded to nothing rather than remaining unexpanded
shopt -u failglob	# disable error message if no matches are found
shopt -u dotglob	# disable matching files starting with .
shopt -u nocaseglob	# disable strict case matching
shopt -u extglob	# enable extended globbing patterns
shopt -s globstar	# enable ** to match all files and zero or more directories and subdirectories


# IOCCC requires use of C locale
#
export LANG="C"
export LC_CTYPE="C"
export LC_NUMERIC="C"
export LC_TIME="C"
export LC_COLLATE="C"
export LC_MONETARY="C"
export LC_MESSAGES="C"
export LC_PAPER="C"
export LC_NAME="C"
export LC_ADDRESS="C"
export LC_TELEPHONE="C"
export LC_MEASUREMENT="C"
export LC_IDENTIFICATION="C"
export LC_ALL="C"


# set variables referenced in the usage message
#
export VERSION="2.2.0 2025-07-10"
NAME=$(basename "$0")
export NAME
export V_FLAG=0
GIT_TOOL=$(type -P git)
export GIT_TOOL
if [[ -z "$GIT_TOOL" ]]; then
    echo "$0: FATAL: git tool is not installed or not in \$PATH" 1>&2
    exit 5
fi
"$GIT_TOOL" rev-parse --is-inside-work-tree >/dev/null 2>&1
status="$?"
if [[ $status -eq 0 ]]; then
    TOPDIR=$("$GIT_TOOL" rev-parse --show-toplevel)
fi
export TOPDIR
#
VERGE=$(type -P verge)
export VERGE
if [[ -z $VERGE ]]; then
    echo "$0: FATAL: verge is not installed or not in \$PATH" 1>&2
    echo "$0: notice: to install verge:" 1>&2
    echo "$0: notice: run: git clone https://github.com/ioccc-src/mkiocccentry.git" 1>&2
    echo "$0: notice: then: cd mkiocccentry && make clobber all" 1>&2
    echo "$0: notice: then: cd jparse && sudo make install clobber" 1>&2
    exit 5
fi
#
JSTRDECODE=$(type -P jstrdecode)
export JSTRDECODE
if [[ -z $JSTRDECODE ]]; then
    echo "$0: FATAL: jstrdecode is not installed or not in \$PATH" 1>&2
    echo "$0: notice: to install jstrdecode:" 1>&2
    echo "$0: notice: run: git clone https://github.com/ioccc-src/mkiocccentry.git" 1>&2
    echo "$0: notice: then: cd mkiocccentry && make clobber all" 1>&2
    echo "$0: notice: then: cd jparse && sudo make install clobber" 1>&2
    exit 5
fi
export MIN_JSTRDECODE_VERSION="2.1.2"
JSTRDECODE_VERSION=$("$JSTRDECODE" -V | head -1 | awk '{print $3;}')
if ! "$VERGE" "$JSTRDECODE_VERSION" "$MIN_JSTRDECODE_VERSION"; then
    echo "$0: FATAL: jstrdecode version: $JSTRDECODE_VERSION < minimum version: $MIN_JSTRDECODE_VERSION" 1>&2
    echo "$0: notice: consider updating jstrdecode from mkiocccentry repo" 1>&2
    echo "$0: notice: run: git clone https://github.com/ioccc-src/mkiocccentry.git" 1>&2
    echo "$0: notice: then: cd mkiocccentry && make clobber all" 1>&2
    echo "$0: notice: then: cd jparse && sudo make install clobber" 1>&2
    exit 5
fi
#
TAC_TOOL=$(type -P tac)
export TAC_TOOL
if [[ ! -x $TAC_TOOL ]]; then
    echo "$0: FATAL: tac executable is not installed or not in \$PATH" 1>&2
    exit 5
fi
FMT_TOOL=$(type -P fmt)
export FMT_TOOL
if [[ ! -x $FMT_TOOL ]]; then
    echo "$0: FATAL: fmt executable is not installed or not in \$PATH" 1>&2
    exit 5
fi
export DOCROOT_SLASH="./"
export TAGLINE="bin/$NAME"
export REPO_TOP_URL="https://github.com/ioccc-src/winner"
# GitHub puts individual files under the "blob/master" sub-directory.
export REPO_URL="$REPO_TOP_URL/blob/master"
export SITE_URL="https://www.ioccc.org"
#
export NOOP=
export DO_NOT_PROCESS=
export EXIT_CODE="0"


# clear options we will add to tools
#
unset TOOL_OPTION
declare -ag TOOL_OPTION


# usage
#
export USAGE="usage: $0 [-h] [-v level] [-V] [-d topdir] [-D docroot/] [-n] [-N]
			[-t tagline] [-w site_url]

	-h		print help message and exit
	-v level	set verbosity level (def level: 0)
	-V		print version string and exit

	-d topdir	set topdir (def: $TOPDIR)
			NOTE: The '-d topdir' is passed as leading options on tool command lines.
	-D docroot/	set the document root path followed by slash (def: $DOCROOT_SLASH)
			NOTE: The '-D docroot/' is passed as leading options on tool command lines.
			NOTE: 'docroot' must end in a slash

	-n		go thru the actions, but do not update any files (def: do the action)
			NOTE: -n is passed to tool
	-N		do not process anything, just parse arguments (def: process something)

	-t tagline	string to write about the tool that formed the markdown content (def: $TAGLINE)
			NOTE: 'tagline' may be enclosed within, but may NOT contain an internal single-quote, or double-quote.

	-w site_url	Base URL of the website (def: $SITE_URL)
			NOTE: The '-w site_url' is passed as leading options on tool command lines.

NOTE: Any '-D docroot/', '-t tagline', '-v level', '-w site_url' are passed to 'md2html.sh' tool.

Exit codes:
     0         all OK
     1	       some internal tool exited non-zero
     2         -h and help string printed or -V and version string printed
     3         command line error
     4         bash version is too old
     5	       some internal tool is not found or not an executable file
     6	       problems found with or in the topdir or topdir/YYYY directory
     7	       problems found with or in the entry topdir/YYYY/dir directory
 >= 10         internal error

$NAME version: $VERSION"


# output_award
#
# Write the award name to standard output (stdout)
#
# usage:
#       output_award YYYY/dir/.entry.json
#
# returns:
#       0 ==> no errors detected, but output may be empty
#     > 0 ==> function error number
#
function output_award
{
    local ENTRY_JSON_PATH;	# the .entry.json path
    local AWARD_STRING;		# winning entry award string

    # parse args
    #
    if [[ $# -ne 1 ]]; then
        echo "$0: ERROR: in output_award: expected 1 arg, found $#" 1>&2
        return 1
    fi
    ENTRY_JSON_PATH="$1"
    if [[ ! -e $ENTRY_JSON_PATH ]]; then
        echo "$0: ERROR: in output_award: .entry.json does not exist: $ENTRY_JSON_PATH" 1>&2
        return 2
    fi
    if [[ ! -f $ENTRY_JSON_PATH ]]; then
        echo "$0: ERROR: in output_award: .entry.json is not a file: $ENTRY_JSON_PATH" 1>&2
        return 3
    fi
    if [[ ! -r $ENTRY_JSON_PATH ]]; then
        echo "$0: ERROR: in output_award: .entry.json is not a readable file: $ENTRY_JSON_PATH" 1>&2
        return 4
    fi

    # obtain the award string
    #
    PATTERN='$..award'
    if [[ $V_FLAG -ge 5 ]]; then
	echo "$0: debug[5]: about to run: $JVAL_WRAPPER -b -q $ENTRY_JSON_PATH \"$PATTERN\" | $JSTRDECODE -d -q -N -" 1>&2
    fi
    AWARD_STRING=$("$JVAL_WRAPPER" -b -q "$ENTRY_JSON_PATH" "$PATTERN" | "$JSTRDECODE" -d -q -N -)
    status_codes=("${PIPESTATUS[@]}")
    if [[ ${status_codes[*]} =~ [1-9] || -z $AWARD_STRING ]]; then
	echo "$0: ERROR: in output_award: no award found in .entry.json file: $ENTRY_JSON_PATH" 1>&2
	return 5
    fi
    echo "$AWARD_STRING"
    return 0
}


# output_abstract
#
# Write the abstract name to standard output (stdout)
#
# usage:
#       output_abstract YYYY/dir/.entry.json
#
# returns:
#       0 ==> no errors detected, but output may be empty
#     > 0 ==> function error number
#
function output_abstract
{
    local ENTRY_JSON_PATH;	# the .entry.json path
    local PATTERN;		# XPath for JSON pattern
    local ABSTRACT;		# extracted abstract from .entry.json

    # parse args
    #
    if [[ $# -ne 1 ]]; then
        echo "$0: ERROR: in output_abstract: expected 1 arg, found $#" 1>&2
        return 1
    fi
    ENTRY_JSON_PATH="$1"
    if [[ ! -e $ENTRY_JSON_PATH ]]; then
        echo "$0: ERROR: in output_abstract: .entry.json does not exist: $ENTRY_JSON_PATH" 1>&2
        return 2
    fi
    if [[ ! -f $ENTRY_JSON_PATH ]]; then
        echo "$0: ERROR: in output_abstract: .entry.json is not a file: $ENTRY_JSON_PATH" 1>&2
        return 3
    fi
    if [[ ! -r $ENTRY_JSON_PATH ]]; then
        echo "$0: ERROR: in output_abstract: .entry.json is not a readable file: $ENTRY_JSON_PATH" 1>&2
        return 4
    fi

    # obtain the abstract string
    #
    PATTERN='$..abstract'
    if [[ $V_FLAG -ge 5 ]]; then
	echo  "$0: debug[5]: about to run: $JVAL_WRAPPER -b -q -- $ENTRY_JSON_PATH '$PATTERN' | $JSTRDECODE -d -q -N -" 1>&2
    fi
    export ABSTRACT
    ABSTRACT=$("$JVAL_WRAPPER" -b -q "$ENTRY_JSON_PATH" "$PATTERN" | "$JSTRDECODE" -d -q -N -)
    status_codes=("${PIPESTATUS[@]}")
    if [[ ${status_codes[*]} =~ [1-9] || -z $ABSTRACT ]]; then
	echo "$0: ERROR: in output_abstract: $JVAL_WRAPPER -b -q -- $ENTRY_JSON_PATH '$PATTERN' | $JSTRDECODE -d -q -N - failed," \
	     "error codes: ${status_codes[*]}" 1>&2
	return 5
    fi
    if [[ ${#ABSTRACT} -ge 65 ]]; then
	echo "$0: ERROR: in output_abstract: abstract length ${#ABSTRACT} >= 65 in $ENTRY_JSON_PATH" 1>&2
	return 6
    fi
    if [[ $ABSTRACT =~ [\;$,] ]]; then
	echo "$0: ERROR: in output_abstract: abstract contains ; or & or , in $ENTRY_JSON_PATH" 1>&2
	return 7
    fi
    echo "${ABSTRACT//[;&,]/}"
    return 0
}


# output_ordinal
#
# Write the numerical ordinal form of a non-negative integer to standard output (stdout)
#
# usage:
#       output_ordinal integer
#
# returns:
#       0 ==> no errors detected
#     > 0 ==> function error number
#
function output_ordinal
{
    local INTEGER;	# integer argument

    # parse args
    #
    if [[ $# -ne 1 ]]; then
        echo "$0: ERROR: in output_ordinal: expected 1 arg, found $#" 1>&2
        return 1
    fi
    INTEGER="$1"
    if [[ $INTEGER =~ ^-?[0-9]+$ ]]; then
	:
    else
	echo "$0: ERROR: argument is not an integer: $INTEGER" 1>&2
	return 2
    fi
    if [[ $INTEGER -lt 0 ]]; then
	echo "$0: ERROR: integer is negative: $INTEGER" 1>&2
	return 3
    fi

    # case: 11, 12, 13 are N-th
    #
    if [[ $INTEGER -ge 11 && $INTEGER -le 13 ]]; then
	echo "${INTEGER}th"

    # case: 1 mod 10 is N-st
    #
    elif [[ $((INTEGER % 10)) -eq 1 ]]; then
	echo "${INTEGER}st"

    # case: 2 mod 10 is N-nd
    #
    elif [[ $((INTEGER % 10)) -eq 2 ]]; then
	echo "${INTEGER}nd"

    # case: 3 mod 10 is N-rd
    #
    elif [[ $((INTEGER % 10)) -eq 3 ]]; then
	echo "${INTEGER}rd"

    # case: everything else is N-th
    #
    else
	echo "${INTEGER}th"
    fi
    return 0
}


# parse command line
#
while getopts :hv:Vd:D:nNt:w: flag; do
  case "$flag" in
    h) echo "$USAGE" 1>&2
	exit 2
	;;
    v) V_FLAG="$OPTARG"
	;;
    V) echo "$VERSION"
	exit 2
	;;
    d) TOPDIR="$OPTARG"
	TOOL_OPTION+=("-d")
	TOOL_OPTION+=("$TOPDIR")
	;;
    D) # parse -D docroot/
	case "$OPTARG" in
	*/) ;;
	*) echo "$0: ERROR: in -D docroot/, the docroot must end in /" 1>&2
	   echo 1>&2
	   echo "$USAGE" 1>&2
	   exit 3
	   ;;
	esac
	DOCROOT_SLASH="$OPTARG"
	# -D docroot/ always added after arg parsing
	;;
    n) NOOP="-n"
	;;
    N) DO_NOT_PROCESS="-N"
	;;
    t) # parse -t tagline
	case "$OPTARG" in
	*"'"*)
	    echo "$0: ERROR: in -t tagline, the tagline may not contain a single-quote character: $OPTARG" 1>&2
	    echo 1>&2
	    echo "$USAGE" 1>&2
	    exit 3
	    ;;
	*'"'*)
	    echo "$0: ERROR: in -t tagline, the tagline may not contain a double-quote character: $OPTARG" 1>&2
	    echo 1>&2
	    echo "$USAGE" 1>&2
	    exit 3
	    ;;
	*) ;;
	esac
	TAGLINE="$OPTARG"
	# -t tagline always added after arg parsing
	;;
    w) SITE_URL="$OPTARG"
	TOOL_OPTION+=("-w")
	TOOL_OPTION+=("$SITE_URL")
	;;
    \?) echo "$0: ERROR: invalid option: -$OPTARG" 1>&2
	echo 1>&2
	echo "$USAGE" 1>&2
	exit 3
	;;
    :) echo "$0: ERROR: option -$OPTARG requires an argument" 1>&2
	echo 1>&2
	echo "$USAGE" 1>&2
	exit 3
	;;
    *) echo "$0: ERROR: unexpected value from getopts: $flag" 1>&2
	echo 1>&2
	echo "$USAGE" 1>&2
	exit 3
	;;
  esac
done
#
# remove the options
#
shift $(( OPTIND - 1 ));
#
# verify arg count and parse args
#
if [[ $V_FLAG -ge 5 ]]; then
    echo "$0: debug[5]: file argument count: $#" 1>&2
fi
#
if [[ $# -ne 0 ]]; then
    echo "$0: ERROR: expected 0 args, found: $#" 1>&2
    exit 3
fi


# always add the '-v level' option, unless level is empty, to the set of options passed to the md2html.sh tool
#
if [[ -n $V_FLAG ]]; then
    TOOL_OPTION+=("-v")
    TOOL_OPTION+=("$V_FLAG")
fi


# always add the '-t tagline' option, unless tagline is empty, to the set of options passed to the md2html.sh tool
#
if [[ -n $TAGLINE ]]; then
    TOOL_OPTION+=("-t")
    TOOL_OPTION+=("$TAGLINE")
fi


# always add the '-U URL' for the top level location.html file
#
TOOL_OPTION+=("-U")
TOOL_OPTION+=("$SITE_URL/years.html")


# always add the '-D docroot/' for the top level location.html file
#
TOOL_OPTION+=("-D")
TOOL_OPTION+=("$DOCROOT_SLASH")


# verify that we have a topdir directory
#
REPO_NAME=$(basename "$REPO_TOP_URL")
export REPO_NAME
if [[ -z $TOPDIR ]]; then
    echo "$0: ERROR: cannot find top of git repo directory" 1>&2
    echo "$0: Notice: if needed: $GIT_TOOL clone $REPO_TOP_URL; cd $REPO_NAME" 1>&2
    exit 6
fi
if [[ ! -e $TOPDIR ]]; then
    echo "$0: ERROR: TOPDIR does not exist: $TOPDIR" 1>&2
    echo "$0: Notice: if needed: $GIT_TOOL clone $REPO_TOP_URL; cd $REPO_NAME" 1>&2
    exit 6
fi
if [[ ! -d $TOPDIR ]]; then
    echo "$0: ERROR: TOPDIR is not a directory: $TOPDIR" 1>&2
    echo "$0: Notice: if needed: $GIT_TOOL clone $REPO_TOP_URL; cd $REPO_NAME" 1>&2
    exit 6
fi


# cd to topdir
#
if [[ ! -e $TOPDIR ]]; then
    echo "$0: ERROR: cannot cd to non-existent path: $TOPDIR" 1>&2
    exit 6
fi
if [[ ! -d $TOPDIR ]]; then
    echo "$0: ERROR: cannot cd to a non-directory: $TOPDIR" 1>&2
    exit 6
fi
export CD_FAILED
if [[ $V_FLAG -ge 5 ]]; then
    echo "$0: debug[5]: about to: cd $TOPDIR" 1>&2
fi
cd "$TOPDIR" || CD_FAILED="true"
if [[ -n $CD_FAILED ]]; then
    echo "$0: ERROR: cd $TOPDIR failed" 1>&2
    exit 6
fi
if [[ $V_FLAG -ge 3 ]]; then
    echo "$0: debug[3]: now in directory: $(/bin/pwd)" 1>&2
fi


# verify that we have a bin subdirectory
#
export BIN_PATH="$TOPDIR/bin"
if [[ ! -d $BIN_PATH ]]; then
    echo "$0: ERROR: bin is not a directory under topdir: $BIN_PATH" 1>&2
    exit 6
fi
export BIN_DIR="bin"


# verify that the bin/md2html.sh tool is executable
#
export MD2HTML_SH="$BIN_DIR/md2html.sh"
if [[ ! -e $MD2HTML_SH ]]; then
    echo  "$0: ERROR: bin/md2html.sh does not exist: $MD2HTML_SH" 1>&2
    exit 5
fi
if [[ ! -f $MD2HTML_SH ]]; then
    echo  "$0: ERROR: bin/md2html.sh is not a regular file: $MD2HTML_SH" 1>&2
    exit 5
fi
if [[ ! -x $MD2HTML_SH ]]; then
    echo  "$0: ERROR: bin/md2html.sh is not an executable file: $MD2HTML_SH" 1>&2
    exit 5
fi


# verify that the bin/pandoc-wrapper.sh tool is executable
#
export PANDOC_WRAPPER="$BIN_DIR/pandoc-wrapper.sh"
if [[ ! -e $PANDOC_WRAPPER ]]; then
    echo  "$0: ERROR: bin/md2html.sh does not exist: $PANDOC_WRAPPER" 1>&2
    exit 5
fi
if [[ ! -f $PANDOC_WRAPPER ]]; then
    echo  "$0: ERROR: bin/md2html.sh is not a regular file: $PANDOC_WRAPPER" 1>&2
    exit 5
fi
if [[ ! -x $PANDOC_WRAPPER ]]; then
    echo  "$0: ERROR: bin/md2html.sh is not an executable file: $PANDOC_WRAPPER" 1>&2
    exit 5
fi


# verify that the bin/jval-wrapper.sh tool is executable
#
JVAL_WRAPPER="$BIN_DIR/jval-wrapper.sh"
if [[ ! -e $JVAL_WRAPPER ]]; then
    echo  "$0: ERROR: bin/jval-wrapper.sh does not exist: $JVAL_WRAPPER" 1>&2
    exit 5
fi
if [[ ! -f $JVAL_WRAPPER ]]; then
    echo  "$0: ERROR: bin/jval-wrapper.sh is not a regular file: $JVAL_WRAPPER" 1>&2
    exit 5
fi
if [[ ! -x $JVAL_WRAPPER ]]; then
    echo  "$0: ERROR: bin/jval-wrapper.sh is not an executable file: $JVAL_WRAPPER" 1>&2
    exit 5
fi


# verify we have a non-empty readable .top file
#
export TOP_FILE=".top"
if [[ ! -e $TOP_FILE ]]; then
    echo  "$0: ERROR: .top does not exist: $TOP_FILE" 1>&2
    exit 6
fi
if [[ ! -f $TOP_FILE ]]; then
    echo  "$0: ERROR: .top is not a regular file: $TOP_FILE" 1>&2
    exit 6
fi
if [[ ! -r $TOP_FILE ]]; then
    echo  "$0: ERROR: .top is not an readable file: $TOP_FILE" 1>&2
    exit 6
fi
if [[ ! -s $TOP_FILE ]]; then
    echo  "$0: ERROR: .top is not a non-empty readable file: $TOP_FILE" 1>&2
    exit 6
fi


# verify that the md2html tool is executable
#
if [[ ! -e $MD2HTML_SH ]]; then
    echo  "$0: ERROR: md2html.sh does not exist: $MD2HTML_SH" 1>&2
    exit 5
fi
if [[ ! -f $MD2HTML_SH ]]; then
    echo  "$0: ERROR: md2html.sh is not a regular file: $MD2HTML_SH" 1>&2
    exit 5
fi
if [[ ! -x $MD2HTML_SH ]]; then
    echo  "$0: ERROR: md2html.sh is not an executable file: $MD2HTML_SH" 1>&2
    exit 5
fi


# note years.html file
#
export YEARS_HTML="years.html"


# print running info if verbose
#
# If -v 3 or higher, print exported variables in order that they were exported.
#
if [[ $V_FLAG -ge 3 ]]; then
    echo "$0: debug[3]: LANG=$LANG" 1>&2
    echo "$0: debug[3]: LC_CTYPE=$LC_CTYPE" 1>&2
    echo "$0: debug[3]: LC_NUMERIC=$LC_NUMERIC" 1>&2
    echo "$0: debug[3]: LC_TIME=$LC_TIME" 1>&2
    echo "$0: debug[3]: LC_COLLATE=$LC_COLLATE" 1>&2
    echo "$0: debug[3]: LC_MONETARY=$LC_MONETARY" 1>&2
    echo "$0: debug[3]: LC_MESSAGES=$LC_MESSAGES" 1>&2
    echo "$0: debug[3]: LC_PAPER=$LC_PAPER" 1>&2
    echo "$0: debug[3]: LC_NAME=$LC_NAME" 1>&2
    echo "$0: debug[3]: LC_ADDRESS=$LC_ADDRESS" 1>&2
    echo "$0: debug[3]: LC_TELEPHONE=$LC_TELEPHONE" 1>&2
    echo "$0: debug[3]: LC_MEASUREMENT=$LC_MEASUREMENT" 1>&2
    echo "$0: debug[3]: LC_IDENTIFICATION=$LC_IDENTIFICATION" 1>&2
    echo "$0: debug[3]: LC_ALL=$LC_ALL" 1>&2
    echo "$0: debug[3]: VERSION=$VERSION" 1>&2
    echo "$0: debug[3]: NAME=$NAME" 1>&2
    echo "$0: debug[3]: V_FLAG=$V_FLAG" 1>&2
    echo "$0: debug[3]: GIT_TOOL=$GIT_TOOL" 1>&2
    echo "$0: debug[3]: TOPDIR=$TOPDIR" 1>&2
    echo "$0: debug[3]: VERGE=$VERGE" 1>&2
    echo "$0: debug[3]: JSTRDECODE=$JSTRDECODE" 1>&2
    echo "$0: debug[3]: MIN_JSTRDECODE_VERSION=$MIN_JSTRDECODE_VERSION" 1>&2
    echo "$0: debug[3]: JSTRDECODE_VERSION=$JSTRDECODE_VERSION" 1>&2
    echo "$0: debug[3]: TAC_TOOL=$TAC_TOOL" 1>&2
    echo "$0: debug[3]: FMT_TOOL=$FMT_TOOL" 1>&2
    echo "$0: debug[3]: DOCROOT_SLASH=$DOCROOT_SLASH" 1>&2
    echo "$0: debug[3]: TAGLINE=$TAGLINE" 1>&2
    echo "$0: debug[3]: REPO_TOP_URL=$REPO_TOP_URL" 1>&2
    echo "$0: debug[3]: REPO_URL=$REPO_URL" 1>&2
    echo "$0: debug[3]: SITE_URL=$SITE_URL" 1>&2
    echo "$0: debug[3]: NOOP=$NOOP" 1>&2
    echo "$0: debug[3]: DO_NOT_PROCESS=$DO_NOT_PROCESS" 1>&2
    echo "$0: debug[3]: EXIT_CODE=$EXIT_CODE" 1>&2
    for index in "${!TOOL_OPTION[@]}"; do
	echo "$0: debug[3]: TOOL_OPTION[$index]=${TOOL_OPTION[$index]}" 1>&2
    done
    echo "$0: debug[3]: REPO_NAME=$REPO_NAME" 1>&2
    echo "$0: debug[3]: CD_FAILED=$CD_FAILED" 1>&2
    echo "$0: debug[3]: BIN_PATH=$BIN_PATH" 1>&2
    echo "$0: debug[3]: BIN_DIR=$BIN_DIR" 1>&2
    echo "$0: debug[3]: MD2HTML_SH=$MD2HTML_SH" 1>&2
    echo "$0: debug[3]: PANDOC_WRAPPER=$PANDOC_WRAPPER" 1>&2
    echo "$0: debug[3]: JVAL_WRAPPER=$JVAL_WRAPPER" 1>&2
    echo "$0: debug[3]: TOP_FILE=$TOP_FILE" 1>&2
    echo "$0: debug[3]: YEARS_HTML=$YEARS_HTML" 1>&2
fi


# -N stops early before any processing is performed
#
if [[ -n $DO_NOT_PROCESS ]]; then
    if [[ $V_FLAG -ge 3 ]]; then
	echo "$0: debug[3]: arguments parsed, -N given, exiting 0" 1>&2
    fi
    exit 0
fi


# create a temporary years markdown file
#
export TMP_YEARS_MD=".tmp.$NAME.YEARS_MD.$$.tmp"
if [[ $V_FLAG -ge 3 ]]; then
    echo  "$0: debug[3]: temporary years markdown file: $TMP_YEARS_MD" 1>&2
fi
if [[ -z $NOOP ]]; then
    trap 'rm -f $TMP_YEARS_MD; exit' 0 1 2 3 15
    rm -f "$TMP_YEARS_MD"
    if [[ -e $TMP_YEARS_MD ]]; then
	echo "$0: ERROR: cannot remove temporary years markdown file: $TMP_YEARS_MD" 1>&2
	exit 10
    fi
    :> "$TMP_YEARS_MD"
    if [[ ! -e $TMP_YEARS_MD ]]; then
	echo "$0: ERROR: cannot create temporary years markdown file: $TMP_YEARS_MD" 1>&2
	exit 11
    fi
elif [[ $V_FLAG -ge 3 ]]; then
    echo "$0: debug[3]: because of -n, temporary years markdown file is not used: $TMP_YEARS_MD" 1>&2
fi


# write All IOCCC years markdown data
#
{
    # write All IOCCC heading lines
    #
    cat << EOF
# IOCCC Winning Entries by Year

### Jump to:
EOF

    # write jump to table of years
    #
    "$TAC_TOOL" "$TOP_FILE" |
      sed -e 's/^.*$/[&](#&)/' |
      "$FMT_TOOL" -w 120 |
      sed -e 's/ / | /g' -e 's/$/<br><br>/' -e '$s/<br><br>//'
    echo
    echo '[**Year level tarballs**](#year_level)'
    echo

} | if [[ -z $NOOP ]]; then
    cat >> "$TMP_YEARS_MD"
else
    cat > /dev/null
    if [[ $V_FLAG -ge 3 ]]; then
        echo "$0: debug[3]: because of -n, All IOCCC years markdown data NOT written into: $TMP_YEARS_MD" 1>&2
    fi
fi


# write Support IOCCC
#
{
    cat << EOF2
<blockquote>
<table>

<tr>
<td colspan="3" style="padding-top: 12px;">
<span class="pseudo_h3">&nbsp;&nbsp;Support the IOCCC</span>
<span class="small_click_below">&nbsp;&nbsp;&nbsp;click below to support</span>
</td>
</tr>

<tr>
<td>
&nbsp;&nbsp;&nbsp;&nbsp;<a href="https://patreon.com/IOCCC"><img src="png/patreon.128x19.png" alt="Patreon logo" width=128 height=19></a>
</td>
<td>
&nbsp;&nbsp;&nbsp;&nbsp;<a href="https://coff.ee/ioccc"><img src="png/buymeacoffee.128x38.png" alt="Buy Me A Coffee logo" width=128 height=38></a>
</td>
<td>
&nbsp;&nbsp;&nbsp;&nbsp;<a href="https://github.com/sponsors/ioccc-src"><img src="png/GitHub.128x51.png" alt="GitHub logo" width=128 height=51></a>
</td>
</tr>

</table>
</blockquote>
EOF2

} | if [[ -z $NOOP ]]; then
    cat >> "$TMP_YEARS_MD"
else
    cat > /dev/null
    if [[ $V_FLAG -ge 3 ]]; then
        echo "$0: debug[3]: because of -n, Support IOCCC NOT written into: $TMP_YEARS_MD" 1>&2
    fi
fi


# write IOCCC on Social Media
#
{
    cat << EOF3
<blockquote>
<table>

<tr>
<td colspan="3" style="padding-top: 12px;">
<span class="pseudo_h3">&nbsp;&nbsp;IOCCC on Social Media</span>
<span class="small_click_below">&nbsp;&nbsp;&nbsp;click below to visit</span>
</td>
</tr>

<tr>
<td style="padding-top: 8px;">
&nbsp;&nbsp;&nbsp;&nbsp;<a href="https://discord.gg/Wa42Qujwnw"><img src="png/Discord.128x37.png" alt="Discord logo" width=128 height=37></a>
</td>
<td style="padding-top: 12px; padding-bottom: 3px;">
&nbsp;&nbsp;&nbsp;&nbsp;<a href="https://fosstodon.org/@ioccc"><img src="png/mastodon.128x38.png" alt="Mastodon logo" width=128 height=38></a>
</td>
<td>
&nbsp;&nbsp;&nbsp;&nbsp;<a href="https://www.youtube.com/@OurFavoriteUniverse"><img src="png/YouTube.128x46.png" alt="YouTube logo" width=128 height=46></a>
</td>
</tr>

</table>
</blockquote>
EOF3

} | if [[ -z $NOOP ]]; then
    cat >> "$TMP_YEARS_MD"
else
    cat > /dev/null
    if [[ $V_FLAG -ge 3 ]]; then
        echo "$0: debug[3]: because of -n, IOCCC on Social Media NOT written into: $TMP_YEARS_MD" 1>&2
    fi
fi


# write markdown for each IOCCC year in reverse order
#
YEAR_COUNT=$(wc -l < "$TOP_FILE" | sed -e 's/[[:space:]]//g')
export YEAR_COUNT
export YYYY
for YYYY in $("$TAC_TOOL" "$TOP_FILE"); do

    # debug YYYY
    #
    if [[ $V_FLAG -ge 1 ]]; then
	echo "$0: debug[1]: using: $TOP_FILE starting to process year: $YYYY" 1>&2
    fi

    # verify that YYYY is a readable directory
    #
    if [[ ! -e $YYYY ]]; then
	echo  "$0: ERROR: YYYY does not exist: $YYYY" 1>&2
	EXIT_CODE="6"  # exit 6
	echo "$0: Warning: EXIT_CODE set to: $EXIT_CODE" 1>&2
	continue
    fi
    if [[ ! -d $YYYY ]]; then
	echo  "$0: ERROR: YYYY is not a directory: $YYYY" 1>&2
	EXIT_CODE="6"  # exit 6
	echo "$0: Warning: EXIT_CODE set to: $EXIT_CODE" 1>&2
	continue
    fi
    if [[ ! -r $YYYY ]]; then
	echo  "$0: ERROR: YYYY is not an readable directory: $YYYY" 1>&2
	EXIT_CODE="6"  # exit 6
	echo "$0: Warning: EXIT_CODE set to: $EXIT_CODE" 1>&2
	continue
    fi

    # verify that YYYY has a non-empty readable .year file
    #
    export YEAR_FILE="$YYYY/.year"
    if [[ ! -e $YEAR_FILE ]]; then
	echo  "$0: ERROR: YYYY/.year does not exist: $YEAR_FILE" 1>&2
	EXIT_CODE="6"  # exit 6
	echo "$0: Warning: EXIT_CODE set to: $EXIT_CODE" 1>&2
	continue
    fi
    if [[ ! -f $YEAR_FILE ]]; then
	echo  "$0: ERROR: YYYY/.year is not a regular file: $YEAR_FILE" 1>&2
	EXIT_CODE="6"  # exit 6
	echo "$0: Warning: EXIT_CODE set to: $EXIT_CODE" 1>&2
	continue
    fi
    if [[ ! -r $YEAR_FILE ]]; then
	echo  "$0: ERROR: YYYY/.year is not an readable file: $YEAR_FILE" 1>&2
	EXIT_CODE="6"  # exit 6
	echo "$0: Warning: EXIT_CODE set to: $EXIT_CODE" 1>&2
	continue
    fi
    if [[ ! -s $YEAR_FILE ]]; then
	echo  "$0: ERROR: YYYY/.year is not a non-empty readable file: $YEAR_FILE" 1>&2
	EXIT_CODE="6"  # exit 6
	echo "$0: Warning: EXIT_CODE set to: $EXIT_CODE" 1>&2
	continue
    fi

    # Verify $YYYY/$YYYY.tar.bz2
    #
    if [[ ! -e $YYYY/$YYYY.tar.bz2 ]]; then
	echo "$0: ERROR: compressed tarball for YYYY: $YYYY is missing: $YYYY/$YYYY.tar.bz2" 1>&2
	EXIT_CODE="6"  # exit 6
	echo "$0: Warning: EXIT_CODE set to: $EXIT_CODE" 1>&2
	continue
    fi
    if [[ ! -s $YYYY/$YYYY.tar.bz2 ]]; then
	echo "$0: Warning: compressed tarball for YYYY: $YYYY is empty: $YYYY/$YYYY.tar.bz2" 1>&2
	echo "$0: notice: continuing the processing of YYYY: $YYYY" 1>&2
    fi

    # write leading markdown for this IOCCC year
    #
    {
	ORDINAL=$(output_ordinal "$YEAR_COUNT")
	echo "<div id=\"$YYYY\">"
	echo "## $YYYY - The $ORDINAL IOCCC"
	echo
	echo "<a class=\"normal\" href=\"$YYYY/index.html\">About the $ORDINAL IOCCC &lpar;$YYYY&rpar;</a><br>"
	echo "<a class=\"normal\" href=\"$YYYY/$YYYY.tar.bz2\">Download all IOCCC winning entries of $YYYY</a></div>"
	echo
    } | if [[ -z $NOOP ]]; then
	cat >> "$TMP_YEARS_MD"
    else
	cat > /dev/null
	if [[ $V_FLAG -ge 3 ]]; then
	    echo "$0: debug[3]: because of -n, IOCCC year $YYYY starting markdown data is NOT written into: $TMP_YEARS_MD" 1>&2
	fi
    fi

    # process each entry under YYYY
    #
    export YYYY_DIR
    for YYYY_DIR in $(< "$YEAR_FILE"); do

	# debug YYYY
	#
	if [[ $V_FLAG -ge 3 ]]; then
	    echo "$0: debug[3]: starting to process year/dir: $YYYY_DIR" 1>&2
	fi

	# parse YYYY_DIR
	#
	if [[ ! -d $YYYY_DIR ]]; then
	    echo "$0: ERROR: YYYY_DIR is not a directory: $YYYY_DIR" 1>&2
	    EXIT_CODE="7"  # exit 7
	    echo "$0: Warning: EXIT_CODE set to: $EXIT_CODE" 1>&2
	    continue
	fi
	if [[ ! -w $YYYY_DIR ]]; then
	    echo "$0: ERROR: YYYY_DIR is not a writable directory: $YYYY_DIR" 1>&2
	    EXIT_CODE="7"  # exit 7
	    echo "$0: Warning: EXIT_CODE set to: $EXIT_CODE" 1>&2
	    continue
	fi
	export YEAR_DIR=${YYYY_DIR%%/*}
	if [[ -z $YEAR_DIR ]]; then
	    echo "$0: ERROR: YYYY_DIR not in YYYY/dir form: $YYYY_DIR" 1>&2
	    EXIT_CODE="7"  # exit 7
	    echo "$0: Warning: EXIT_CODE set to: $EXIT_CODE" 1>&2
	    continue
	fi
	export ENTRY_DIR=${YYYY_DIR#*/}
	if [[ -z $ENTRY_DIR ]]; then
	    echo "$0: ERROR: YYYY_DIR not in $YEAR_DIR/dir form: $YYYY_DIR" 1>&2
	    EXIT_CODE="7"  # exit 7
	    echo "$0: Warning: EXIT_CODE set to: $EXIT_CODE" 1>&2
	    continue
	fi
	if [[ $ENTRY_DIR = */* ]]; then
	    echo "$0: ERROR: YYYY_DIR: $YYYY_DIR dir contains a /: $ENTRY_DIR" 1>&2
	    EXIT_CODE="7"  # exit 7
	    echo "$0: Warning: EXIT_CODE set to: $EXIT_CODE" 1>&2
	    continue
	fi

	# verify that YYYY_DIR is a writable directory
	#
	if [[ ! -e $YYYY_DIR ]]; then
	    echo  "$0: ERROR: YYYY_DIR does not exist: $YYYY_DIR" 1>&2
	    EXIT_CODE="7"  # exit 7
	    echo "$0: Warning: EXIT_CODE set to: $EXIT_CODE" 1>&2
	    continue
	fi
	if [[ ! -d $YYYY_DIR ]]; then
	    echo  "$0: ERROR: YYYY_DIR is not a directory: $YYYY_DIR" 1>&2
	    EXIT_CODE="7"  # exit 7
	    echo "$0: Warning: EXIT_CODE set to: $EXIT_CODE" 1>&2
	    continue
	fi
	if [[ ! -w $YYYY_DIR ]]; then
	    echo  "$0: ERROR: YYYY_DIR is not an writable directory: $YYYY_DIR" 1>&2
	    EXIT_CODE="7"  # exit 7
	    echo "$0: Warning: EXIT_CODE set to: $EXIT_CODE" 1>&2
	    continue
	fi

	# verify YYYY/dir/.path
	#
	export DOT_PATH="$YYYY_DIR/.path"
	if [[ ! -s $DOT_PATH ]]; then
	    echo "$0: ERROR: not a non-empty file: $DOT_PATH" 1>&2
	    EXIT_CODE="7"  # exit 7
	    echo "$0: Warning: EXIT_CODE set to: $EXIT_CODE" 1>&2
	    continue
	fi
	DOT_PATH_CONTENT=$(< "$DOT_PATH")
	if [[ $YYYY_DIR != "$DOT_PATH_CONTENT" ]]; then
	    echo "$0: ERROR: arg: $YYYY_DIR does not match $DOT_PATH contents: $DOT_PATH_CONTENT" 1>&2
	    EXIT_CODE="7"  # exit 7
	    echo "$0: Warning: EXIT_CODE set to: $EXIT_CODE" 1>&2
	    continue
	fi
	export ENTRY_JSON="$YYYY_DIR/.entry.json"
	if [[ ! -e $ENTRY_JSON ]]; then
	    echo "$0: ERROR: .entry.json does not exist: $ENTRY_JSON" 1>&2
	    EXIT_CODE="7"  # exit 7
	    echo "$0: Warning: EXIT_CODE set to: $EXIT_CODE" 1>&2
	    continue
	fi
	if [[ ! -f $ENTRY_JSON ]]; then
	    echo "$0: ERROR: .entry.json is not a file: $ENTRY_JSON" 1>&2
	    EXIT_CODE="7"  # exit 7
	    echo "$0: Warning: EXIT_CODE set to: $EXIT_CODE" 1>&2
	    continue
	fi
	if [[ ! -r $ENTRY_JSON ]]; then
	    echo "$0: ERROR: .entry.json is not a readable file: $ENTRY_JSON" 1>&2
	    EXIT_CODE="7"  # exit 7
	    echo "$0: Warning: EXIT_CODE set to: $EXIT_CODE" 1>&2
	    continue
	fi

	# determine the award for this entry
	#
	AWARD=$(output_award "$ENTRY_JSON")
	status="$?"
	if [[ $status -ne 0 || -z $AWARD ]]; then
	    echo "$0: ERROR: cannot find award in .entry.json: $ENTRY_JSON" 1>&2
	    EXIT_CODE="7"  # exit 7
	    echo "$0: Warning: EXIT_CODE set to: $EXIT_CODE" 1>&2
	    continue
	fi

	# determine the abstract for this entry
	#
	ABSTRACT=$(output_abstract "$ENTRY_JSON")
	status="$?"
	if [[ $status -ne 0 || -z $ABSTRACT ]]; then
	    echo "$0: ERROR: cannot find abstract in .entry.json: $ENTRY_JSON" 1>&2
	    EXIT_CODE="7"  # exit 7
	    echo "$0: Warning: EXIT_CODE set to: $EXIT_CODE" 1>&2
	    continue
	fi

	# Verify $YYYY_DIR/README.md
	#
	if [[ ! -e $YYYY_DIR/README.md ]]; then
	    echo "$0: ERROR: README.md for YYYY: $YYYY is missing: $YYYY_DIR/README.md" 1>&2
	    EXIT_CODE="7"  # exit 7
	    echo "$0: Warning: EXIT_CODE set to: $EXIT_CODE" 1>&2
	    continue
	fi
	if [[ ! -s $YYYY_DIR/README.md ]]; then
	    echo "$0: Warning: README.md for YYYY/dir: $YYYY_DIR/README.md is empty: $YYYY_DIR/README.md" 1>&2
	    echo "$0: notice: continuing the processing of YYYY: $YYYY" 1>&2
	fi

	# output markdown for this entry
	#
	echo "* <div id=\"${YEAR_DIR}_${ENTRY_DIR}\"><a class=\"normal\" href=\"$YYYY_DIR/index.html\">$YYYY_DIR</a> - $AWARD - <i>$ABSTRACT</i></div>"
    done | if [[ -z $NOOP ]]; then
        cat >> "$TMP_YEARS_MD"
    else
        cat > /dev/null
        if [[ $V_FLAG -ge 3 ]]; then
            echo "$0: debug[3]: because of -n, markdown data is NOT written into: $TMP_YEARS_MD" 1>&2
        fi
    fi

    # write trailing markdown for this IOCCC year
    #
    {
	echo
	echo '&nbsp;**Jump to:** [top](#)'
	echo

    } | if [[ -z $NOOP ]]; then
	cat >> "$TMP_YEARS_MD"
    else
	cat > /dev/null
	if [[ $V_FLAG -ge 3 ]]; then
	    echo "$0: debug[3]: because of -n, IOCCC year $YYYY ending markdown data is NOT written into: $TMP_YEARS_MD" 1>&2
	fi
    fi

    # count down this year
    #
    ((--YEAR_COUNT))
done


# write year_level links to all the year level tarballs
#
{
    echo '<div id="year_level"><div id="inventory">'
    echo '## IOCCC Year level tarballs'
    echo '</div></div>'
    echo
    for YYYY in $("$TAC_TOOL" "$TOP_FILE"); do
	echo "<a class=\"normal\" href=\"$YYYY/$YYYY.tar.bz2\">Download all IOCCC winning entries of $YYYY</a><br>"
    done
    echo
    echo '&nbsp;**Jump to:** [top](#)'
    echo

} | if [[ -z $NOOP ]]; then
    cat >> "$TMP_YEARS_MD"
else
    cat > /dev/null
    if [[ $V_FLAG -ge 3 ]]; then
	echo "$0: debug[3]: because of -n, links to year level tarball markdown data is NOT written into: $TMP_YEARS_MD" 1>&2
    fi
fi


# use the md2html.sh tool to form a location HTML file, unless -n
#
if [[ -z $NOOP ]]; then
    if [[ $V_FLAG -ge 1 ]]; then
	echo "$0: debug[1]: about to run: $MD2HTML_SH ${TOOL_OPTION[*]} -- years.md $TMP_YEARS_MD $YEARS_HTML" 1>&2
    fi
    "$MD2HTML_SH" "${TOOL_OPTION[@]}" -- years.md "$TMP_YEARS_MD" "$YEARS_HTML"
    status="$?"
    if [[ $status -ne 0 ]]; then
	echo "$0: ERROR: md2html.sh: $MD2HTML_SH ${TOOL_OPTION[*]} -- years.md $TMP_YEARS_MD $YEARS_HTML" \
	     "failed, error: $status" 1>&2
	EXIT_CODE="1"  # exit 1
	echo "$0: Warning: EXIT_CODE set to: $EXIT_CODE" 1>&2
    elif [[ $V_FLAG -ge 3 ]]; then
	echo "$0: debug[3]: now up to date: $YEARS_HTML" 1>&2
    fi

# report disabled by -n
#
elif [[ $V_FLAG -ge 5 ]]; then
    echo "$0: debug[5]: because of -n, did not run: $MD2HTML_SH ${TOOL_OPTION[*]} -- years.md $TMP_YEARS_MD $YEARS_HTML" 1>&2
fi


# file cleanup
#
if [[ -z $NOOP ]]; then
    rm -f -- "$TMP_YEARS_MD"
elif [[ $V_FLAG -ge 3 ]]; then
    echo "$0: debug[3]: because of -n, disabled: rm -f -- $TMP_YEARS_MD" 1>&2
fi


# All Done!!! All Done!!! -- Jessica Noll, Age 2
#
if [[ $EXIT_CODE -ne 0 ]]; then
    echo "$0: Warning: about to exit $EXIT_CODE" 1>&2
fi
exit "$EXIT_CODE"