docker, docs, sample-lnd.conf: update examples for new command-line options

sample-lnd.conf

@@ -97,29 +97,6 @@
 ; active.
 bitcoin.active=1
 
-; The host that your local btcd daemon is listening on. This MUST be set if
-; neutrino mode isn't active.
-; bitcoin.rpchost=localhost
-              
-; Username for RPC connections to btcd. This only needs to be set if neutrino
-; mode isn't active. By default, lnd will attempt to automatically obtain the
-; credentials, so this likely won't need to be set (other than for simnet mode).
-; bitcoin.rpcuser=kek
-
-; Password for RPC connections to btcd. This only needs to be set if neutrino
-; mode isn't active. By default, lnd will attempt to automatically obtain the
-; credentials, so this likely won't need to be set (other than for simnet mode).
-; bitcoin.rpcpass=kek
-
-; File containing the daemon's certificate file. This only needs to be set if
-; the node isn't on the same host as lnd.
-; bitcoin.rpccert=~/.btcd/rpc.cert
-
-; The raw bytes of the daemon's PEM-encoded certificate chain which will be used
-; to authenticate the RPC connection. This only needs to be set if the btcd
-; node is on a remote host.
-; bitcoin.rawrpccert=   
-
 ; Use Bitcoin's test network.
 ; bitcoin.testnet=1
 ; 
@@ -129,6 +106,77 @@ bitcoin.simnet=1
 ; Use Bitcoin's regression test network
 ; bitcoin.regtest=false
 
+; Use the btcd back-end
+bitcoin.node=btcd
+
+; Use the bitcoind back-end
+; bitcoin.node=bitcoind 
+
+; Use the neutrino (light client) back-end
+; bitcoin.node=neutrino
+
+
+[Btcd]
+
+; The host that your local btcd daemon is listening on. By default, this
+; setting is assumed to be localhost with the default port for the current
+; network.
+; btcd.rpchost=localhost
+              
+; Username for RPC connections to btcd. By default, lnd will attempt to
+; automatically obtain the credentials, so this likely won't need to be set
+; (other than for simnet mode).
+; btcd.rpcuser=kek
+
+; Password for RPC connections to btcd. By default, lnd will attempt to
+; automatically obtain the credentials, so this likely won't need to be set
+; (other than for simnet mode).
+; btcd.rpcpass=kek
+
+; File containing the daemon's certificate file. This only needs to be set if
+; the node isn't on the same host as lnd.
+; btcd.rpccert=~/.btcd/rpc.cert
+
+; The raw bytes of the daemon's PEM-encoded certificate chain which will be used
+; to authenticate the RPC connection. This only needs to be set if the btcd
+; node is on a remote host.
+; btcd.rawrpccert=   
+
+
+[Bitcoind]
+
+; The host that your local bitcoind daemon is listening on. By default, this
+; setting is assumed to be localhost with the default port for the current
+; network.
+; bitcoind.rpchost=localhost
+              
+; Username for RPC connections to bitcoind. By default, lnd will attempt to
+; automatically obtain the credentials, so this likely won't need to be set
+; (other than for a remote bitcoind instance).
+; bitcoind.rpcuser=kek
+
+; Password for RPC connections to bitcoind. By default, lnd will attempt to
+; automatically obtain the credentials, so this likely won't need to be set
+; (other than for a remote bitcoind instance).
+; bitcoind.rpcpass=kek
+
+; ZMQ socket which sends rawblock and (optionally) rawtx notifications from
+; bitcoind. By default, lnd will attempt to automatically obtain this
+; information, so this likely won't need to be set (other than for a remote
+; bitcoind instance).
+; bitcoind.zmqpath=tcp://127.0.0.1:18501 
+
+
+[neutrino]
+
+; Connect only to the specified peers at startup. This creates a persistent
+; connection to a target peer. This is recommended as there aren't many
+; neutrino compliant full nodes on the test network yet.
+;neutrino.connect=
+
+; Add a peer to connect with at startup.
+;neutrino.addpeer=
+
 
 [Litecoin]
 
@@ -136,27 +184,6 @@ bitcoin.simnet=1
 ; active.
 ; litecoin.active=1
 
-; The host that your local ltcd daemon is listening on. This MUST be set if
-; neutrino mode isn't active.
-; litecoin.rpchost=localhost
-              
-; Username for RPC connections to ltcd. This only needs to be set if neutrino
-; mode isn't active.
-; litecoin.rpcuser= 
-
-; Password for RPC connections to ltcd. This only needs to be set if neutrino
-; mode isn't active.
-; litecoin.rpcpass= 
-
-; File containing the daemon's certificate file. This only needs to be set if
-; the node isn't on the same host as lnd.
-; litecoin.rpccert=~/.btcd/rpc.cert
-
-; The raw bytes of the daemon's PEM-encoded certificate chain which will be used
-; to authenticate the RPC connection. This only needs to be set if the ltcd
-; node is on a remote host.
-; litecoin.rawrpccert=   
-
 ; Use Bitcoin's test network.
 ; litecoin.testnet=1
 ; 
@@ -166,21 +193,37 @@ litecoin.simnet=1
 ; Use Bitcoin's regression test network
 ; litecoin.regtest=false
 
+; Use the ltcd back-end (marked as btcd). No other back-end type is currently
+; supported for litecoin.
+litecoin.node=btcd
 
-[neutrino]
 
-; If the light client mode should be active or not. This mode requires less
-; disk space as it doesn't require one to have full-node locally. Instead,
-; neutrino will connect to the P2P network for all of lnd's needs.
-neutrino.active=false
+[Ltcd]
 
-; Connect only to the specified peers at startup. This creates a persistent
-; connection to a target peer. This is recommend as there aren't many neutrino
-; compliant full nodes on the test network yet.
-;neutrino.connect=
+; The host that your local ltcd daemon is listening on. By default, this
+; setting is assumed to be localhost with the default port for the current
+; network.
+; ltcd.rpchost=localhost
+              
+; Username for RPC connections to ltcd. By default, lnd will attempt to
+; automatically obtain the credentials, so this likely won't need to be set
+; (other than for simnet mode).
+; ltcd.rpcuser=kek
+
+; Password for RPC connections to ltcd. By default, lnd will attempt to
+; automatically obtain the credentials, so this likely won't need to be set
+; (other than for simnet mode).
+; ltcd.rpcpass=kek
+
+; File containing the daemon's certificate file. This only needs to be set if
+; the node isn't on the same host as lnd.
+; ltcd.rpccert=~/.ltcd/rpc.cert
+
+; The raw bytes of the daemon's PEM-encoded certificate chain which will be used
+; to authenticate the RPC connection. This only needs to be set if the ltcd
+; node is on a remote host.
+; ltcd.rawrpccert= 
 
-; Add a peer to connect with at startup.
-;neutrino.addpeer=
 
 [autopilot]