Add 2005/mikeash/try.sh, update bugs, typo/format

2005/mikeash/README.md

@@ -5,22 +5,33 @@ make
 ```
 
 
+### Bugs and (Mis)features:
+
+The current status of this entry is:
+
+```
+STATUS: INABIAF - please **DO NOT** fix
+```
+
+For more detailed information see [2005 mikeash in bugs.md](/bugs.md#2005-mikeash).
+
+
 ## To use:
 
 ```sh
 ./mikeash
 ```
 
+NOTE: the author stated that they tested this under i386 machines but this works
+under 64-bit (x86_64, arm64) machines too.
+
 
 ### Try:
 
 ```sh
-./mikeash < mikeash.c
-./mikeash < mikeash.c | diff - mikeash.c
+./try.sh
 ```
 
-NOTE: the author stated that they tested this under i386 machines but this works
-under 64-bit (x86_64, arm64) machines too.
 
 
 ## Judges' remarks:
@@ -46,7 +57,7 @@ interpreter for an extremely limited and highly broken subset of [Common
 Lisp](https://en.wikipedia.org/wiki/Common_Lisp).
 
 It requires C99 because of `C99`'s ability to declare variables in the
-initializer of a for loop. Unfortunately, C99 mode typically warns about
+initializer of a `for` loop. Unfortunately, C99 mode typically warns about
 implicitly declared functions, and preprocessor directives prevent the program
 from being valid [Common Lisp](https://en.wikipedia.org/wiki/Common_Lisp). As a
 result, several warnings will be printed about implicit declarations of
@@ -70,9 +81,10 @@ used:
 echo '(format t "~s" (* (+ 2 2 ) (- 5 (/ 9 3 ))))' | ./mikeash
 ```
 
-This evaluates the expression `(2+2) * (5 - 9/3)` giving the correct
-result, 8.  Note that due to the highly ad-hoc nature of the tokenizer,
-the spaces before the closing parentheses are mandatory.
+This evaluates the expression `(2+2) * (5 - 9/3)` giving the correct result,
+`8"` (with the same issue of no newline after the `"`).  Note that due to the
+highly ad-hoc nature of the tokenizer, the spaces before the closing parentheses
+are mandatory.
 
 The program can also be run in an interactive mode, by simply executing
 `./mikeash` and then typing lisp expressions, but this is difficult due to the
@@ -104,8 +116,8 @@ constants such as `#\x`.
 * The `char-upcase` function will give strange results if passed something
 other than a lowercase character.
 
-* The format function takes exactly three parameters. The first parameter is
-ignored; output always goes to stdout. The second parameter must have exactly
+* The `format` function takes exactly three parameters. The first parameter is
+ignored; output always goes to `stdout`. The second parameter must have exactly
 one `~s` format specifier in it, and no other format specifiers are permitted.
 
 * The arithmetic functions take exactly two parameters.
@@ -126,7 +138,7 @@ diff mikeash.c mikeash2.c
 
 The program can also be run from an implementation of [common
 lisp](https://en.wikipedia.org/wiki/Common_Lisp). To do
-this, run the [common lisp compiler and then type the following command:
+this, run the common lisp compiler and then type the following command:
 
 ```
 (load "mikeash.c")
@@ -134,6 +146,9 @@ this, run the [common lisp compiler and then type the following command:
 
 The source code of [mikeash.c](mikeash.c) will be printed.
 
+
+### Obfuscation
+
 `Lispob` is obfuscated in several ways. First, it's actually two programs
 in one, which actually share a small amount of code. Running a C code
 beautifier will destroy the [LISP][] program contained within. Second and

2005/mikeash/try.sh

@@ -0,0 +1,42 @@
+#!/usr/bin/env bash
+#
+# try.sh - demonstrate IOCCC winner 2005/mikeash
+#
+
+# make sure CC is set so that when we do make CC="$CC" it isn't empty. Doing it
+# this way allows us to have the user specify a different compiler in an easy
+# way.
+if [[ -z "$CC" ]]; then
+    CC="cc"
+fi
+
+make CC="$CC" all >/dev/null || exit 1
+
+# clear screen after compilation so that only the entry is shown
+clear
+
+
+echo "$ ./mikeash < mikeash.c" 1>&2
+./mikeash < mikeash.c
+
+echo 1>&2
+echo "The next command should print nothing." 1>&2
+read -r -n 1 -p "Press any key to continue: "
+echo "$ ./mikeash < mikeash.c | diff - mikeash.c" 1>&2
+./mikeash < mikeash.c | diff - mikeash.c
+
+echo 1>&2
+echo "For the next two commands we will add a newline after the command's output" 1>&2
+echo "for your convenience as they will not print a newline themselves." 1>&2
+echo 1>&2
+echo "The next command should show: \"4." 1>&2
+read -r -n 1 -p "Press any key to continue: "
+echo "$ echo '(format t "~s" (+ 2 2 ))' | ./mikeash" 1>&2
+echo '(format t "~s" (+ 2 2 ))' | ./mikeash
+echo 1>&2
+
+echo "The next command will evaluate the expression: (2+2) * (5 - 9/3), giving 8\"." 1>&2
+read -r -n 1 -p "Press any key to continue: "
+echo "$ echo '(format t "~s" (* (+ 2 2 ) (- 5 (/ 9 3 ))))' | ./mikeash" 1>&2
+echo '(format t "~s" (* (+ 2 2 ) (- 5 (/ 9 3 ))))' | ./mikeash
+echo 1>&2

bugs.md

@@ -2209,6 +2209,51 @@ does not exist.
 This entry requires that `sed` and `make` are in the path.
 
 
+## 2005 mikeash
+
+### STATUS: INABIAF - please **DO NOT** fix
+### Source code: [2005/mikeash/mikeash.c](2005/mikeash/mikeash.c)
+### Information: [2005/mikeash/README.md](2005/mikeash/README.md)
+
+The author states:
+
+* The only built-in functions are `defvar`, `format`, `substitute`,
+`char-upcase`, `+`, `-`, `*`, and `/`.
+
+* Only one variable is available. This variable is called `q`, although any
+symbol name starting with the letter `q` will be mapped to this variable.
+
+* Only the first letter of a function name is significant. For example,
+`format`, `f`, `farm`, and various other words starting with `f` will all map to
+the `format` function.
+
+* The `defvar` function completely ignores its first parameter. It will always
+store the result of evaluating its second parameter in `q`. Unlike in [Common
+Lisp](https://en.wikipedia.org/wiki/Common_Lisp), multiple invocations of
+`defvar` on the same variable will overwrite old values.
+
+* Character constants are limited to `#\Newline` and single-character
+constants such as `#\x`.
+
+* The `char-upcase` function will give strange results if passed something
+other than a lowercase character.
+
+* The `format` function takes exactly three parameters. The first parameter is
+ignored; output always goes to `stdout`. The second parameter must have exactly
+one `~s` format specifier in it, and no other format specifiers are permitted.
+
+* The arithmetic functions take exactly two parameters.
+
+* All tokens must be separated from a following `)` by whitespace.
+
+* A lot of other things. Notably, the language which this program interprets is
+nowhere near
+[Turing-complete](https://en.wikipedia.org/wiki/Turing_completeness).
+
+Basically, the [LISP][] interpreter is good for some basic math operations, and
+for running itself.
+
+
 ## 2005 mynx
 
 ### STATUS: INABIAF - please **DO NOT** fix

thanks-for-fixes.md

@@ -3017,6 +3017,15 @@ updated in both the string and the code to be `'n'`.
 The array size of `c` was updated by 1 out of caution just in case as the array
 is used to store at least part of the string.
 
+It might be worth noting that the author stated that the reason for the `\N` is
+due to LISP having different escape sequences. The code was modified so that
+feeding the program itself will print itself, showing no difference, which is
+what is supposed to happen. It is not known, however, if having to change the
+`\N` to `\n` ended up breaking any LISP. The other examples given by the author
+also show correct output though.
+
+Cody also added the [try.sh](2005/mikeash/try.sh) script.
+
 
 ## [2005/mynx](2005/mynx/mynx.c) ([README.md](2005/mynx/README.md]))