Typo fix and improve brew instructions in bin/

In particular the notice for macOS users now tells how to install bash
with Homebrew (brew install bash).

bin/all-run.sh

@@ -68,7 +68,7 @@
 # often use it "version 5.2.26(1)-release" or later, and the RHEL Linux bash we
 # use often use is "version 5.1.8(1)-release" or later.  These versions are what
 # we initially tested.  We recommend you either upgrade bash or install a newer
-# version of bash and adjust your $PATH so that "/usr/bin/env bash" finds a basj
+# version of bash and adjust your $PATH so that "/usr/bin/env bash" finds a bash
 # that is version 5.1.8 or later.
 #
 # NOTE: The macOS shipped, as of 2024 March 15, a version of bash is something like
@@ -77,11 +77,11 @@
 #	(see https://brew.sh), and then install homebrew bash (/opt/homebrew/bin/bash),
 #	and then arrange your $PATH so that "/opt/homebrew/bin" is ahead of "/bin".
 #
-# NOTE: And while macports might work, we noticed a number of subtle differences
+# NOTE: And while MacPorts might work, we noticed a number of subtle differences
 #	with some of their ported tools to suggest you might be better off
 #	with installing homebrew (see https://brew.sh).  No disrespect is intended
-#	to the macports team as they do a commendable job.  Nevertheless we ran
-#	into enough differences with macports environments to suggest you
+#	to the MacPorts team as they do a commendable job.  Nevertheless we ran
+#	into enough differences with MacPorts environments to suggest you
 #	might find a better experience with this tool under homebrew instead.
 #
 if [[ -z ${BASH_VERSINFO[0]} ||
@@ -91,7 +91,7 @@ if [[ -z ${BASH_VERSINFO[0]} ||
     echo "$0: ERROR: bash version needs to be >= 5.1.8: $BASH_VERSION" 1>&2
     echo "$0: Warning: bash version >= 4.2 might work but 5.1.8 was the minimum we tested" 1>&2
     echo "$0: Notice: For macOS users: install homebrew (see https://brew.sh)," \
-	 "then install homebrew bash, and then modify your \$PATH so that \"#!/usr/bin/env bash\"" \
+	 "then install homebrew bash (brew install bash), and then modify your \$PATH so that \"#!/usr/bin/env bash\"" \
 	 "finds the homebrew installed (usually /opt/homebrew/bin/bash) version of bash" 1>&2
     exit 4
 fi

bin/all-years.sh

@@ -67,7 +67,7 @@
 # often use it "version 5.2.26(1)-release" or later, and the RHEL Linux bash we
 # use often use is "version 5.1.8(1)-release" or later.  These versions are what
 # we initially tested.  We recommend you either upgrade bash or install a newer
-# version of bash and adjust your $PATH so that "/usr/bin/env bash" finds a basj
+# version of bash and adjust your $PATH so that "/usr/bin/env bash" finds a bash
 # that is version 5.1.8 or later.
 #
 # NOTE: The macOS shipped, as of 2024 March 15, a version of bash is something like
@@ -76,11 +76,11 @@
 #	(see https://brew.sh), and then install homebrew bash (/opt/homebrew/bin/bash),
 #	and then arrange your $PATH so that "/opt/homebrew/bin" is ahead of "/bin".
 #
-# NOTE: And while macports might work, we noticed a number of subtle differences
+# NOTE: And while MacPorts might work, we noticed a number of subtle differences
 #	with some of their ported tools to suggest you might be better off
 #	with installing homebrew (see https://brew.sh).  No disrespect is intended
-#	to the macports team as they do a commendable job.  Nevertheless we ran
-#	into enough differences with macports environments to suggest you
+#	to the MacPorts team as they do a commendable job.  Nevertheless we ran
+#	into enough differences with MacPorts environments to suggest you
 #	might find a better experience with this tool under homebrew instead.
 #
 if [[ -z ${BASH_VERSINFO[0]} ||
@@ -90,7 +90,7 @@ if [[ -z ${BASH_VERSINFO[0]} ||
     echo "$0: ERROR: bash version needs to be >= 5.1.8: $BASH_VERSION" 1>&2
     echo "$0: Warning: bash version >= 4.2 might work but 5.1.8 was the minimum we tested" 1>&2
     echo "$0: Notice: For macOS users: install homebrew (see https://brew.sh)," \
-	 "then install homebrew bash, and then modify your \$PATH so that \"#!/usr/bin/env bash\"" \
+	 "then install homebrew bash (brew install bash), and then modify your \$PATH so that \"#!/usr/bin/env bash\"" \
 	 "finds the homebrew installed (usually /opt/homebrew/bin/bash) version of bash" 1>&2
     exit 4
 fi

bin/chk-entry.sh

@@ -39,7 +39,7 @@
 # often use it "version 5.2.26(1)-release" or later, and the RHEL Linux bash we
 # use often use is "version 5.1.8(1)-release" or later.  These versions are what
 # we initially tested.  We recommend you either upgrade bash or install a newer
-# version of bash and adjust your $PATH so that "/usr/bin/env bash" finds a basj
+# version of bash and adjust your $PATH so that "/usr/bin/env bash" finds a bash
 # that is version 5.1.8 or later.
 #
 # NOTE: The macOS shipped, as of 2024 March 15, a version of bash is something like
@@ -48,11 +48,11 @@
 #	(see https://brew.sh), and then install homebrew bash (/opt/homebrew/bin/bash),
 #	and then arrange your $PATH so that "/opt/homebrew/bin" is ahead of "/bin".
 #
-# NOTE: And while macports might work, we noticed a number of subtle differences
+# NOTE: And while MacPorts might work, we noticed a number of subtle differences
 #	with some of their ported tools to suggest you might be better off
 #	with installing homebrew (see https://brew.sh).  No disrespect is intended
-#	to the macports team as they do a commendable job.  Nevertheless we ran
-#	into enough differences with macports environments to suggest you
+#	to the MacPorts team as they do a commendable job.  Nevertheless we ran
+#	into enough differences with MacPorts environments to suggest you
 #	might find a better experience with this tool under homebrew instead.
 #
 if [[ -z ${BASH_VERSINFO[0]} ||
@@ -62,7 +62,7 @@ if [[ -z ${BASH_VERSINFO[0]} ||
     echo "$0: ERROR: bash version needs to be >= 5.1.8: $BASH_VERSION" 1>&2
     echo "$0: Warning: bash version >= 4.2 might work but 5.1.8 was the minimum we tested" 1>&2
     echo "$0: Notice: For macOS users: install homebrew (see https://brew.sh)," \
-	 "then install homebrew bash, and then modify your \$PATH so that \"#!/usr/bin/env bash\"" \
+	 "then install homebrew bash (brew install bash), and then modify your \$PATH so that \"#!/usr/bin/env bash\"" \
 	 "finds the homebrew installed (usually /opt/homebrew/bin/bash) version of bash" 1>&2
     exit 4
 fi

bin/gen-authors.sh

@@ -39,7 +39,7 @@
 # often use it "version 5.2.26(1)-release" or later, and the RHEL Linux bash we
 # use often use is "version 5.1.8(1)-release" or later.  These versions are what
 # we initially tested.  We recommend you either upgrade bash or install a newer
-# version of bash and adjust your $PATH so that "/usr/bin/env bash" finds a basj
+# version of bash and adjust your $PATH so that "/usr/bin/env bash" finds a bash
 # that is version 5.1.8 or later.
 #
 # NOTE: The macOS shipped, as of 2024 March 15, a version of bash is something like
@@ -48,11 +48,11 @@
 #	(see https://brew.sh), and then install homebrew bash (/opt/homebrew/bin/bash),
 #	and then arrange your $PATH so that "/opt/homebrew/bin" is ahead of "/bin".
 #
-# NOTE: And while macports might work, we noticed a number of subtle differences
+# NOTE: And while MacPorts might work, we noticed a number of subtle differences
 #	with some of their ported tools to suggest you might be better off
 #	with installing homebrew (see https://brew.sh).  No disrespect is intended
-#	to the macports team as they do a commendable job.  Nevertheless we ran
-#	into enough differences with macports environments to suggest you
+#	to the MacPorts team as they do a commendable job.  Nevertheless we ran
+#	into enough differences with MacPorts environments to suggest you
 #	might find a better experience with this tool under homebrew instead.
 #
 if [[ -z ${BASH_VERSINFO[0]} ||
@@ -62,7 +62,7 @@ if [[ -z ${BASH_VERSINFO[0]} ||
     echo "$0: ERROR: bash version needs to be >= 5.1.8: $BASH_VERSION" 1>&2
     echo "$0: Warning: bash version >= 4.2 might work but 5.1.8 was the minimum we tested" 1>&2
     echo "$0: Notice: For macOS users: install homebrew (see https://brew.sh)," \
-	 "then install homebrew bash, and then modify your \$PATH so that \"#!/usr/bin/env bash\"" \
+	 "then install homebrew bash (brew install bash), and then modify your \$PATH so that \"#!/usr/bin/env bash\"" \
 	 "finds the homebrew installed (usually /opt/homebrew/bin/bash) version of bash" 1>&2
     exit 4
 fi

bin/gen-location.sh

@@ -39,7 +39,7 @@
 # often use it "version 5.2.26(1)-release" or later, and the RHEL Linux bash we
 # use often use is "version 5.1.8(1)-release" or later.  These versions are what
 # we initially tested.  We recommend you either upgrade bash or install a newer
-# version of bash and adjust your $PATH so that "/usr/bin/env bash" finds a basj
+# version of bash and adjust your $PATH so that "/usr/bin/env bash" finds a bash
 # that is version 5.1.8 or later.
 #
 # NOTE: The macOS shipped, as of 2024 March 15, a version of bash is something like
@@ -48,11 +48,11 @@
 #	(see https://brew.sh), and then install homebrew bash (/opt/homebrew/bin/bash),
 #	and then arrange your $PATH so that "/opt/homebrew/bin" is ahead of "/bin".
 #
-# NOTE: And while macports might work, we noticed a number of subtle differences
+# NOTE: And while MacPorts might work, we noticed a number of subtle differences
 #	with some of their ported tools to suggest you might be better off
 #	with installing homebrew (see https://brew.sh).  No disrespect is intended
-#	to the macports team as they do a commendable job.  Nevertheless we ran
-#	into enough differences with macports environments to suggest you
+#	to the MacPorts team as they do a commendable job.  Nevertheless we ran
+#	into enough differences with MacPorts environments to suggest you
 #	might find a better experience with this tool under homebrew instead.
 #
 if [[ -z ${BASH_VERSINFO[0]} ||
@@ -62,7 +62,7 @@ if [[ -z ${BASH_VERSINFO[0]} ||
     echo "$0: ERROR: bash version needs to be >= 5.1.8: $BASH_VERSION" 1>&2
     echo "$0: Warning: bash version >= 4.2 might work but 5.1.8 was the minimum we tested" 1>&2
     echo "$0: Notice: For macOS users: install homebrew (see https://brew.sh)," \
-	 "then install homebrew bash, and then modify your \$PATH so that \"#!/usr/bin/env bash\"" \
+	 "then install homebrew bash (brew install bash), and then modify your \$PATH so that \"#!/usr/bin/env bash\"" \
 	 "finds the homebrew installed (usually /opt/homebrew/bin/bash) version of bash" 1>&2
     exit 4
 fi

bin/gen-other-html.sh

@@ -39,7 +39,7 @@
 # often use it "version 5.2.26(1)-release" or later, and the RHEL Linux bash we
 # use often use is "version 5.1.8(1)-release" or later.  These versions are what
 # we initially tested.  We recommend you either upgrade bash or install a newer
-# version of bash and adjust your $PATH so that "/usr/bin/env bash" finds a basj
+# version of bash and adjust your $PATH so that "/usr/bin/env bash" finds a bash
 # that is version 5.1.8 or later.
 #
 # NOTE: The macOS shipped, as of 2024 March 15, a version of bash is something like
@@ -48,11 +48,11 @@
 #	(see https://brew.sh), and then install homebrew bash (/opt/homebrew/bin/bash),
 #	and then arrange your $PATH so that "/opt/homebrew/bin" is ahead of "/bin".
 #
-# NOTE: And while macports might work, we noticed a number of subtle differences
+# NOTE: And while MacPorts might work, we noticed a number of subtle differences
 #	with some of their ported tools to suggest you might be better off
 #	with installing homebrew (see https://brew.sh).  No disrespect is intended
-#	to the macports team as they do a commendable job.  Nevertheless we ran
-#	into enough differences with macports environments to suggest you
+#	to the MacPorts team as they do a commendable job.  Nevertheless we ran
+#	into enough differences with MacPorts environments to suggest you
 #	might find a better experience with this tool under homebrew instead.
 #
 if [[ -z ${BASH_VERSINFO[0]} ||
@@ -62,7 +62,7 @@ if [[ -z ${BASH_VERSINFO[0]} ||
     echo "$0: ERROR: bash version needs to be >= 5.1.8: $BASH_VERSION" 1>&2
     echo "$0: Warning: bash version >= 4.2 might work but 5.1.8 was the minimum we tested" 1>&2
     echo "$0: Notice: For macOS users: install homebrew (see https://brew.sh)," \
-	 "then install homebrew bash, and then modify your \$PATH so that \"#!/usr/bin/env bash\"" \
+	 "then install homebrew bash (brew install bash), and then modify your \$PATH so that \"#!/usr/bin/env bash\"" \
 	 "finds the homebrew installed (usually /opt/homebrew/bin/bash) version of bash" 1>&2
     exit 4
 fi

bin/gen-sitemap.sh

@@ -39,7 +39,7 @@
 # often use it "version 5.2.26(1)-release" or later, and the RHEL Linux bash we
 # use often use is "version 5.1.8(1)-release" or later.  These versions are what
 # we initially tested.  We recommend you either upgrade bash or install a newer
-# version of bash and adjust your $PATH so that "/usr/bin/env bash" finds a basj
+# version of bash and adjust your $PATH so that "/usr/bin/env bash" finds a bash
 # that is version 5.1.8 or later.
 #
 # NOTE: The macOS shipped, as of 2024 March 15, a version of bash is something like
@@ -48,11 +48,11 @@
 #	(see https://brew.sh), and then install homebrew bash (/opt/homebrew/bin/bash),
 #	and then arrange your $PATH so that "/opt/homebrew/bin" is ahead of "/bin".
 #
-# NOTE: And while macports might work, we noticed a number of subtle differences
+# NOTE: And while MacPorts might work, we noticed a number of subtle differences
 #	with some of their ported tools to suggest you might be better off
 #	with installing homebrew (see https://brew.sh).  No disrespect is intended
-#	to the macports team as they do a commendable job.  Nevertheless we ran
-#	into enough differences with macports environments to suggest you
+#	to the MacPorts team as they do a commendable job.  Nevertheless we ran
+#	into enough differences with MacPorts environments to suggest you
 #	might find a better experience with this tool under homebrew instead.
 #
 if [[ -z ${BASH_VERSINFO[0]} ||
@@ -62,7 +62,7 @@ if [[ -z ${BASH_VERSINFO[0]} ||
     echo "$0: ERROR: bash version needs to be >= 5.1.8: $BASH_VERSION" 1>&2
     echo "$0: Warning: bash version >= 4.2 might work but 5.1.8 was the minimum we tested" 1>&2
     echo "$0: Notice: For macOS users: install homebrew (see https://brew.sh)," \
-	 "then install homebrew bash, and then modify your \$PATH so that \"#!/usr/bin/env bash\"" \
+	 "then install homebrew bash (brew install bash), and then modify your \$PATH so that \"#!/usr/bin/env bash\"" \
 	 "finds the homebrew installed (usually /opt/homebrew/bin/bash) version of bash" 1>&2
     exit 4
 fi

bin/gen-status.sh

@@ -39,7 +39,7 @@
 # often use it "version 5.2.26(1)-release" or later, and the RHEL Linux bash we
 # use often use is "version 5.1.8(1)-release" or later.  These versions are what
 # we initially tested.  We recommend you either upgrade bash or install a newer
-# version of bash and adjust your $PATH so that "/usr/bin/env bash" finds a basj
+# version of bash and adjust your $PATH so that "/usr/bin/env bash" finds a bash
 # that is version 5.1.8 or later.
 #
 # NOTE: The macOS shipped, as of 2024 March 15, a version of bash is something like
@@ -48,11 +48,11 @@
 #	(see https://brew.sh), and then install homebrew bash (/opt/homebrew/bin/bash),
 #	and then arrange your $PATH so that "/opt/homebrew/bin" is ahead of "/bin".
 #
-# NOTE: And while macports might work, we noticed a number of subtle differences
+# NOTE: And while MacPorts might work, we noticed a number of subtle differences
 #	with some of their ported tools to suggest you might be better off
 #	with installing homebrew (see https://brew.sh).  No disrespect is intended
-#	to the macports team as they do a commendable job.  Nevertheless we ran
-#	into enough differences with macports environments to suggest you
+#	to the MacPorts team as they do a commendable job.  Nevertheless we ran
+#	into enough differences with MacPorts environments to suggest you
 #	might find a better experience with this tool under homebrew instead.
 #
 if [[ -z ${BASH_VERSINFO[0]} ||
@@ -62,7 +62,7 @@ if [[ -z ${BASH_VERSINFO[0]} ||
     echo "$0: ERROR: bash version needs to be >= 5.1.8: $BASH_VERSION" 1>&2
     echo "$0: Warning: bash version >= 4.2 might work but 5.1.8 was the minimum we tested" 1>&2
     echo "$0: Notice: For macOS users: install homebrew (see https://brew.sh)," \
-	 "then install homebrew bash, and then modify your \$PATH so that \"#!/usr/bin/env bash\"" \
+	 "then install homebrew bash (brew install bash), and then modify your \$PATH so that \"#!/usr/bin/env bash\"" \
 	 "finds the homebrew installed (usually /opt/homebrew/bin/bash) version of bash" 1>&2
     exit 4
 fi

bin/gen-top-html.sh

@@ -43,7 +43,7 @@
 # often use it "version 5.2.26(1)-release" or later, and the RHEL Linux bash we
 # use often use is "version 5.1.8(1)-release" or later.  These versions are what
 # we initially tested.  We recommend you either upgrade bash or install a newer
-# version of bash and adjust your $PATH so that "/usr/bin/env bash" finds a basj
+# version of bash and adjust your $PATH so that "/usr/bin/env bash" finds a bash
 # that is version 5.1.8 or later.
 #
 # NOTE: The macOS shipped, as of 2024 March 15, a version of bash is something like
@@ -52,11 +52,11 @@
 #	(see https://brew.sh), and then install homebrew bash (/opt/homebrew/bin/bash),
 #	and then arrange your $PATH so that "/opt/homebrew/bin" is ahead of "/bin".
 #
-# NOTE: And while macports might work, we noticed a number of subtle differences
+# NOTE: And while MacPorts might work, we noticed a number of subtle differences
 #	with some of their ported tools to suggest you might be better off
 #	with installing homebrew (see https://brew.sh).  No disrespect is intended
-#	to the macports team as they do a commendable job.  Nevertheless we ran
-#	into enough differences with macports environments to suggest you
+#	to the MacPorts team as they do a commendable job.  Nevertheless we ran
+#	into enough differences with MacPorts environments to suggest you
 #	might find a better experience with this tool under homebrew instead.
 #
 if [[ -z ${BASH_VERSINFO[0]} ||
@@ -66,7 +66,7 @@ if [[ -z ${BASH_VERSINFO[0]} ||
     echo "$0: ERROR: bash version needs to be >= 5.1.8: $BASH_VERSION" 1>&2
     echo "$0: Warning: bash version >= 4.2 might work but 5.1.8 was the minimum we tested" 1>&2
     echo "$0: Notice: For macOS users: install homebrew (see https://brew.sh)," \
-	 "then install homebrew bash, and then modify your \$PATH so that \"#!/usr/bin/env bash\"" \
+	 "then install homebrew bash (brew install bash), and then modify your \$PATH so that \"#!/usr/bin/env bash\"" \
 	 "finds the homebrew installed (usually /opt/homebrew/bin/bash) version of bash" 1>&2
     exit 4
 fi

bin/gen-year-index.sh

@@ -41,7 +41,7 @@
 # often use it "version 5.2.26(1)-release" or later, and the RHEL Linux bash we
 # use often use is "version 5.1.8(1)-release" or later.  These versions are what
 # we initially tested.  We recommend you either upgrade bash or install a newer
-# version of bash and adjust your $PATH so that "/usr/bin/env bash" finds a basj
+# version of bash and adjust your $PATH so that "/usr/bin/env bash" finds a bash
 # that is version 5.1.8 or later.
 #
 # NOTE: The macOS shipped, as of 2024 March 15, a version of bash is something like
@@ -50,11 +50,11 @@
 #	(see https://brew.sh), and then install homebrew bash (/opt/homebrew/bin/bash),
 #	and then arrange your $PATH so that "/opt/homebrew/bin" is ahead of "/bin".
 #
-# NOTE: And while macports might work, we noticed a number of subtle differences
+# NOTE: And while MacPorts might work, we noticed a number of subtle differences
 #	with some of their ported tools to suggest you might be better off
 #	with installing homebrew (see https://brew.sh).  No disrespect is intended
-#	to the macports team as they do a commendable job.  Nevertheless we ran
-#	into enough differences with macports environments to suggest you
+#	to the MacPorts team as they do a commendable job.  Nevertheless we ran
+#	into enough differences with MacPorts environments to suggest you
 #	might find a better experience with this tool under homebrew instead.
 #
 if [[ -z ${BASH_VERSINFO[0]} ||
@@ -64,7 +64,7 @@ if [[ -z ${BASH_VERSINFO[0]} ||
     echo "$0: ERROR: bash version needs to be >= 5.1.8: $BASH_VERSION" 1>&2
     echo "$0: Warning: bash version >= 4.2 might work but 5.1.8 was the minimum we tested" 1>&2
     echo "$0: Notice: For macOS users: install homebrew (see https://brew.sh)," \
-	 "then install homebrew bash, and then modify your \$PATH so that \"#!/usr/bin/env bash\"" \
+	 "then install homebrew bash (brew install bash), and then modify your \$PATH so that \"#!/usr/bin/env bash\"" \
 	 "finds the homebrew installed (usually /opt/homebrew/bin/bash) version of bash" 1>&2
     exit 4
 fi

bin/gen-years.sh

@@ -39,7 +39,7 @@
 # often use it "version 5.2.26(1)-release" or later, and the RHEL Linux bash we
 # use often use is "version 5.1.8(1)-release" or later.  These versions are what
 # we initially tested.  We recommend you either upgrade bash or install a newer
-# version of bash and adjust your $PATH so that "/usr/bin/env bash" finds a basj
+# version of bash and adjust your $PATH so that "/usr/bin/env bash" finds a bash
 # that is version 5.1.8 or later.
 #
 # NOTE: The macOS shipped, as of 2024 March 15, a version of bash is something like
@@ -48,11 +48,11 @@
 #	(see https://brew.sh), and then install homebrew bash (/opt/homebrew/bin/bash),
 #	and then arrange your $PATH so that "/opt/homebrew/bin" is ahead of "/bin".
 #
-# NOTE: And while macports might work, we noticed a number of subtle differences
+# NOTE: And while MacPorts might work, we noticed a number of subtle differences
 #	with some of their ported tools to suggest you might be better off
 #	with installing homebrew (see https://brew.sh).  No disrespect is intended
-#	to the macports team as they do a commendable job.  Nevertheless we ran
-#	into enough differences with macports environments to suggest you
+#	to the MacPorts team as they do a commendable job.  Nevertheless we ran
+#	into enough differences with MacPorts environments to suggest you
 #	might find a better experience with this tool under homebrew instead.
 #
 if [[ -z ${BASH_VERSINFO[0]} ||
@@ -62,7 +62,7 @@ if [[ -z ${BASH_VERSINFO[0]} ||
     echo "$0: ERROR: bash version needs to be >= 5.1.8: $BASH_VERSION" 1>&2
     echo "$0: Warning: bash version >= 4.2 might work but 5.1.8 was the minimum we tested" 1>&2
     echo "$0: Notice: For macOS users: install homebrew (see https://brew.sh)," \
-	 "then install homebrew bash, and then modify your \$PATH so that \"#!/usr/bin/env bash\"" \
+	 "then install homebrew bash (brew install bash), and then modify your \$PATH so that \"#!/usr/bin/env bash\"" \
 	 "finds the homebrew installed (usually /opt/homebrew/bin/bash) version of bash" 1>&2
     exit 4
 fi

bin/md2html.sh

@@ -91,7 +91,7 @@
 # often use it "version 5.2.26(1)-release" or later, and the RHEL Linux bash we
 # use often use is "version 5.1.8(1)-release" or later.  These versions are what
 # we initially tested.  We recommend you either upgrade bash or install a newer
-# version of bash and adjust your $PATH so that "/usr/bin/env bash" finds a basj
+# version of bash and adjust your $PATH so that "/usr/bin/env bash" finds a bash
 # that is version 5.1.8 or later.
 #
 # NOTE: The macOS shipped, as of 2024 March 15, a version of bash is something like
@@ -100,21 +100,22 @@
 #	(see https://brew.sh), and then install homebrew bash (/opt/homebrew/bin/bash),
 #	and then arrange your $PATH so that "/opt/homebrew/bin" is ahead of "/bin".
 #
-# NOTE: And while macports might work, we noticed a number of subtle differences
+# NOTE: And while MacPorts might work, we noticed a number of subtle differences
 #	with some of their ported tools to suggest you might be better off
 #	with installing homebrew (see https://brew.sh).  No disrespect is intended
-#	to the macports team as they do a commendable job.  Nevertheless we ran
-#	into enough differences with macports environments to suggest you
+#	to the MacPorts team as they do a commendable job.  Nevertheless we ran
+#	into enough differences with MacPorts environments to suggest you
 #	might find a better experience with this tool under homebrew instead.
 #
 if [[ -z ${BASH_VERSINFO[0]} ||
 	 ${BASH_VERSINFO[0]} -lt 5 ||
 	 ${BASH_VERSINFO[0]} -eq 5 && ${BASH_VERSINFO[1]} -lt 1 ||
 	 ${BASH_VERSINFO[0]} -eq 5 && ${BASH_VERSINFO[1]} -eq 1 && ${BASH_VERSINFO[2]} -lt 8 ]]; then
+
     echo "$0: ERROR: bash version needs to be >= 5.1.8: $BASH_VERSION" 1>&2
     echo "$0: Warning: bash version >= 4.2 might work but 5.1.8 was the minimum we tested" 1>&2
     echo "$0: Notice: For macOS users: install homebrew (see https://brew.sh)," \
-	 "then install homebrew bash, and then modify your \$PATH so that \"#!/usr/bin/env bash\"" \
+	 "then install homebrew bash (brew install bash), and then modify your \$PATH so that \"#!/usr/bin/env bash\"" \
 	 "finds the homebrew installed (usually /opt/homebrew/bin/bash) version of bash" 1>&2
     exit 4
 fi

bin/output-index-author.sh

@@ -45,7 +45,7 @@
 # often use it "version 5.2.26(1)-release" or later, and the RHEL Linux bash we
 # use often use is "version 5.1.8(1)-release" or later.  These versions are what
 # we initially tested.  We recommend you either upgrade bash or install a newer
-# version of bash and adjust your $PATH so that "/usr/bin/env bash" finds a basj
+# version of bash and adjust your $PATH so that "/usr/bin/env bash" finds a bash
 # that is version 5.1.8 or later.
 #
 # NOTE: The macOS shipped, as of 2024 March 15, a version of bash is something like
@@ -54,21 +54,22 @@
 #	(see https://brew.sh), and then install homebrew bash (/opt/homebrew/bin/bash),
 #	and then arrange your $PATH so that "/opt/homebrew/bin" is ahead of "/bin".
 #
-# NOTE: And while macports might work, we noticed a number of subtle differences
+# NOTE: And while MacPorts might work, we noticed a number of subtle differences
 #	with some of their ported tools to suggest you might be better off
 #	with installing homebrew (see https://brew.sh).  No disrespect is intended
-#	to the macports team as they do a commendable job.  Nevertheless we ran
-#	into enough differences with macports environments to suggest you
+#	to the MacPorts team as they do a commendable job.  Nevertheless we ran
+#	into enough differences with MacPorts environments to suggest you
 #	might find a better experience with this tool under homebrew instead.
 #
 if [[ -z ${BASH_VERSINFO[0]} ||
 	 ${BASH_VERSINFO[0]} -lt 5 ||
 	 ${BASH_VERSINFO[0]} -eq 5 && ${BASH_VERSINFO[1]} -lt 1 ||
 	 ${BASH_VERSINFO[0]} -eq 5 && ${BASH_VERSINFO[1]} -eq 1 && ${BASH_VERSINFO[2]} -lt 8 ]]; then
+
     echo "$0: ERROR: bash version needs to be >= 5.1.8: $BASH_VERSION" 1>&2
     echo "$0: Warning: bash version >= 4.2 might work but 5.1.8 was the minimum we tested" 1>&2
     echo "$0: Notice: For macOS users: install homebrew (see https://brew.sh)," \
-	 "then install homebrew bash, and then modify your \$PATH so that \"#!/usr/bin/env bash\"" \
+	 "then install homebrew bash (brew install bash), and then modify your \$PATH so that \"#!/usr/bin/env bash\"" \
 	 "finds the homebrew installed (usually /opt/homebrew/bin/bash) version of bash" 1>&2
     exit 4
 fi

bin/output-index-inventory.sh

@@ -45,7 +45,7 @@
 # often use it "version 5.2.26(1)-release" or later, and the RHEL Linux bash we
 # use often use is "version 5.1.8(1)-release" or later.  These versions are what
 # we initially tested.  We recommend you either upgrade bash or install a newer
-# version of bash and adjust your $PATH so that "/usr/bin/env bash" finds a basj
+# version of bash and adjust your $PATH so that "/usr/bin/env bash" finds a bash
 # that is version 5.1.8 or later.
 #
 # NOTE: The macOS shipped, as of 2024 March 15, a version of bash is something like
@@ -54,21 +54,22 @@
 #	(see https://brew.sh), and then install homebrew bash (/opt/homebrew/bin/bash),
 #	and then arrange your $PATH so that "/opt/homebrew/bin" is ahead of "/bin".
 #
-# NOTE: And while macports might work, we noticed a number of subtle differences
+# NOTE: And while MacPorts might work, we noticed a number of subtle differences
 #	with some of their ported tools to suggest you might be better off
 #	with installing homebrew (see https://brew.sh).  No disrespect is intended
-#	to the macports team as they do a commendable job.  Nevertheless we ran
-#	into enough differences with macports environments to suggest you
+#	to the MacPorts team as they do a commendable job.  Nevertheless we ran
+#	into enough differences with MacPorts environments to suggest you
 #	might find a better experience with this tool under homebrew instead.
 #
 if [[ -z ${BASH_VERSINFO[0]} ||
 	 ${BASH_VERSINFO[0]} -lt 5 ||
 	 ${BASH_VERSINFO[0]} -eq 5 && ${BASH_VERSINFO[1]} -lt 1 ||
 	 ${BASH_VERSINFO[0]} -eq 5 && ${BASH_VERSINFO[1]} -eq 1 && ${BASH_VERSINFO[2]} -lt 8 ]]; then
+
     echo "$0: ERROR: bash version needs to be >= 5.1.8: $BASH_VERSION" 1>&2
     echo "$0: Warning: bash version >= 4.2 might work but 5.1.8 was the minimum we tested" 1>&2
     echo "$0: Notice: For macOS users: install homebrew (see https://brew.sh)," \
-	 "then install homebrew bash, and then modify your \$PATH so that \"#!/usr/bin/env bash\"" \
+	 "then install homebrew bash (brew install bash), and then modify your \$PATH so that \"#!/usr/bin/env bash\"" \
 	 "finds the homebrew installed (usually /opt/homebrew/bin/bash) version of bash" 1>&2
     exit 4
 fi

bin/output-year-index.sh

@@ -46,7 +46,7 @@
 # often use it "version 5.2.26(1)-release" or later, and the RHEL Linux bash we
 # use often use is "version 5.1.8(1)-release" or later.  These versions are what
 # we initially tested.  We recommend you either upgrade bash or install a newer
-# version of bash and adjust your $PATH so that "/usr/bin/env bash" finds a basj
+# version of bash and adjust your $PATH so that "/usr/bin/env bash" finds a bash
 # that is version 5.1.8 or later.
 #
 # NOTE: The macOS shipped, as of 2024 March 15, a version of bash is something like
@@ -55,21 +55,22 @@
 #	(see https://brew.sh), and then install homebrew bash (/opt/homebrew/bin/bash),
 #	and then arrange your $PATH so that "/opt/homebrew/bin" is ahead of "/bin".
 #
-# NOTE: And while macports might work, we noticed a number of subtle differences
+# NOTE: And while MacPorts might work, we noticed a number of subtle differences
 #	with some of their ported tools to suggest you might be better off
 #	with installing homebrew (see https://brew.sh).  No disrespect is intended
-#	to the macports team as they do a commendable job.  Nevertheless we ran
-#	into enough differences with macports environments to suggest you
+#	to the MacPorts team as they do a commendable job.  Nevertheless we ran
+#	into enough differences with MacPorts environments to suggest you
 #	might find a better experience with this tool under homebrew instead.
 #
 if [[ -z ${BASH_VERSINFO[0]} ||
 	 ${BASH_VERSINFO[0]} -lt 5 ||
 	 ${BASH_VERSINFO[0]} -eq 5 && ${BASH_VERSINFO[1]} -lt 1 ||
 	 ${BASH_VERSINFO[0]} -eq 5 && ${BASH_VERSINFO[1]} -eq 1 && ${BASH_VERSINFO[2]} -lt 8 ]]; then
+
     echo "$0: ERROR: bash version needs to be >= 5.1.8: $BASH_VERSION" 1>&2
     echo "$0: Warning: bash version >= 4.2 might work but 5.1.8 was the minimum we tested" 1>&2
     echo "$0: Notice: For macOS users: install homebrew (see https://brew.sh)," \
-	 "then install homebrew bash, and then modify your \$PATH so that \"#!/usr/bin/env bash\"" \
+	 "then install homebrew bash (brew install bash), and then modify your \$PATH so that \"#!/usr/bin/env bash\"" \
 	 "finds the homebrew installed (usually /opt/homebrew/bin/bash) version of bash" 1>&2
     exit 4
 fi

bin/pandoc-wrapper.sh

@@ -46,7 +46,7 @@
 # often use it "version 5.2.26(1)-release" or later, and the RHEL Linux bash we
 # use often use is "version 5.1.8(1)-release" or later.  These versions are what
 # we initially tested.  We recommend you either upgrade bash or install a newer
-# version of bash and adjust your $PATH so that "/usr/bin/env bash" finds a basj
+# version of bash and adjust your $PATH so that "/usr/bin/env bash" finds a bash
 # that is version 5.1.8 or later.
 #
 # NOTE: The macOS shipped, as of 2024 March 15, a version of bash is something like
@@ -55,21 +55,22 @@
 #	(see https://brew.sh), and then install homebrew bash (/opt/homebrew/bin/bash),
 #	and then arrange your $PATH so that "/opt/homebrew/bin" is ahead of "/bin".
 #
-# NOTE: And while macports might work, we noticed a number of subtle differences
+# NOTE: And while MacPorts might work, we noticed a number of subtle differences
 #	with some of their ported tools to suggest you might be better off
 #	with installing homebrew (see https://brew.sh).  No disrespect is intended
-#	to the macports team as they do a commendable job.  Nevertheless we ran
-#	into enough differences with macports environments to suggest you
+#	to the MacPorts team as they do a commendable job.  Nevertheless we ran
+#	into enough differences with MacPorts environments to suggest you
 #	might find a better experience with this tool under homebrew instead.
 #
 if [[ -z ${BASH_VERSINFO[0]} ||
 	 ${BASH_VERSINFO[0]} -lt 5 ||
 	 ${BASH_VERSINFO[0]} -eq 5 && ${BASH_VERSINFO[1]} -lt 1 ||
 	 ${BASH_VERSINFO[0]} -eq 5 && ${BASH_VERSINFO[1]} -eq 1 && ${BASH_VERSINFO[2]} -lt 8 ]]; then
+
     echo "$0: ERROR: bash version needs to be >= 5.1.8: $BASH_VERSION" 1>&2
     echo "$0: Warning: bash version >= 4.2 might work but 5.1.8 was the minimum we tested" 1>&2
     echo "$0: Notice: For macOS users: install homebrew (see https://brew.sh)," \
-	 "then install homebrew bash, and then modify your \$PATH so that \"#!/usr/bin/env bash\"" \
+	 "then install homebrew bash (brew install bash), and then modify your \$PATH so that \"#!/usr/bin/env bash\"" \
 	 "finds the homebrew installed (usually /opt/homebrew/bin/bash) version of bash" 1>&2
     exit 4
 fi

bin/quick-readme2index.sh

@@ -48,7 +48,7 @@
 # often use it "version 5.2.26(1)-release" or later, and the RHEL Linux bash we
 # use often use is "version 5.1.8(1)-release" or later.  These versions are what
 # we initially tested.  We recommend you either upgrade bash or install a newer
-# version of bash and adjust your $PATH so that "/usr/bin/env bash" finds a basj
+# version of bash and adjust your $PATH so that "/usr/bin/env bash" finds a bash
 # that is version 5.1.8 or later.
 #
 # NOTE: The macOS shipped, as of 2024 March 15, a version of bash is something like
@@ -57,21 +57,22 @@
 #	(see https://brew.sh), and then install homebrew bash (/opt/homebrew/bin/bash),
 #	and then arrange your $PATH so that "/opt/homebrew/bin" is ahead of "/bin".
 #
-# NOTE: And while macports might work, we noticed a number of subtle differences
+# NOTE: And while MacPorts might work, we noticed a number of subtle differences
 #	with some of their ported tools to suggest you might be better off
 #	with installing homebrew (see https://brew.sh).  No disrespect is intended
-#	to the macports team as they do a commendable job.  Nevertheless we ran
-#	into enough differences with macports environments to suggest you
+#	to the MacPorts team as they do a commendable job.  Nevertheless we ran
+#	into enough differences with MacPorts environments to suggest you
 #	might find a better experience with this tool under homebrew instead.
 #
 if [[ -z ${BASH_VERSINFO[0]} ||
 	 ${BASH_VERSINFO[0]} -lt 5 ||
 	 ${BASH_VERSINFO[0]} -eq 5 && ${BASH_VERSINFO[1]} -lt 1 ||
 	 ${BASH_VERSINFO[0]} -eq 5 && ${BASH_VERSINFO[1]} -eq 1 && ${BASH_VERSINFO[2]} -lt 8 ]]; then
+
     echo "$0: ERROR: bash version needs to be >= 5.1.8: $BASH_VERSION" 1>&2
     echo "$0: Warning: bash version >= 4.2 might work but 5.1.8 was the minimum we tested" 1>&2
     echo "$0: Notice: For macOS users: install homebrew (see https://brew.sh)," \
-	 "then install homebrew bash, and then modify your \$PATH so that \"#!/usr/bin/env bash\"" \
+	 "then install homebrew bash (brew install bash), and then modify your \$PATH so that \"#!/usr/bin/env bash\"" \
 	 "finds the homebrew installed (usually /opt/homebrew/bin/bash) version of bash" 1>&2
     exit 4
 fi

bin/readme2index.sh

@@ -42,7 +42,7 @@
 # often use it "version 5.2.26(1)-release" or later, and the RHEL Linux bash we
 # use often use is "version 5.1.8(1)-release" or later.  These versions are what
 # we initially tested.  We recommend you either upgrade bash or install a newer
-# version of bash and adjust your $PATH so that "/usr/bin/env bash" finds a basj
+# version of bash and adjust your $PATH so that "/usr/bin/env bash" finds a bash
 # that is version 5.1.8 or later.
 #
 # NOTE: The macOS shipped, as of 2024 March 15, a version of bash is something like
@@ -51,21 +51,22 @@
 #	(see https://brew.sh), and then install homebrew bash (/opt/homebrew/bin/bash),
 #	and then arrange your $PATH so that "/opt/homebrew/bin" is ahead of "/bin".
 #
-# NOTE: And while macports might work, we noticed a number of subtle differences
+# NOTE: And while MacPorts might work, we noticed a number of subtle differences
 #	with some of their ported tools to suggest you might be better off
 #	with installing homebrew (see https://brew.sh).  No disrespect is intended
-#	to the macports team as they do a commendable job.  Nevertheless we ran
-#	into enough differences with macports environments to suggest you
+#	to the MacPorts team as they do a commendable job.  Nevertheless we ran
+#	into enough differences with MacPorts environments to suggest you
 #	might find a better experience with this tool under homebrew instead.
 #
 if [[ -z ${BASH_VERSINFO[0]} ||
 	 ${BASH_VERSINFO[0]} -lt 5 ||
 	 ${BASH_VERSINFO[0]} -eq 5 && ${BASH_VERSINFO[1]} -lt 1 ||
 	 ${BASH_VERSINFO[0]} -eq 5 && ${BASH_VERSINFO[1]} -eq 1 && ${BASH_VERSINFO[2]} -lt 8 ]]; then
+
     echo "$0: ERROR: bash version needs to be >= 5.1.8: $BASH_VERSION" 1>&2
     echo "$0: Warning: bash version >= 4.2 might work but 5.1.8 was the minimum we tested" 1>&2
     echo "$0: Notice: For macOS users: install homebrew (see https://brew.sh)," \
-	 "then install homebrew bash, and then modify your \$PATH so that \"#!/usr/bin/env bash\"" \
+	 "then install homebrew bash (brew install bash), and then modify your \$PATH so that \"#!/usr/bin/env bash\"" \
 	 "finds the homebrew installed (usually /opt/homebrew/bin/bash) version of bash" 1>&2
     exit 4
 fi

bin/sort.gitignore.sh

@@ -54,7 +54,7 @@
 # often use it "version 5.2.26(1)-release" or later, and the RHEL Linux bash we
 # use often use is "version 5.1.8(1)-release" or later.  These versions are what
 # we initially tested.  We recommend you either upgrade bash or install a newer
-# version of bash and adjust your $PATH so that "/usr/bin/env bash" finds a basj
+# version of bash and adjust your $PATH so that "/usr/bin/env bash" finds a bash
 # that is version 5.1.8 or later.
 #
 # NOTE: The macOS shipped, as of 2024 March 15, a version of bash is something like
@@ -63,21 +63,22 @@
 #	(see https://brew.sh), and then install homebrew bash (/opt/homebrew/bin/bash),
 #	and then arrange your $PATH so that "/opt/homebrew/bin" is ahead of "/bin".
 #
-# NOTE: And while macports might work, we noticed a number of subtle differences
+# NOTE: And while MacPorts might work, we noticed a number of subtle differences
 #	with some of their ported tools to suggest you might be better off
 #	with installing homebrew (see https://brew.sh).  No disrespect is intended
-#	to the macports team as they do a commendable job.  Nevertheless we ran
-#	into enough differences with macports environments to suggest you
+#	to the MacPorts team as they do a commendable job.  Nevertheless we ran
+#	into enough differences with MacPorts environments to suggest you
 #	might find a better experience with this tool under homebrew instead.
 #
 if [[ -z ${BASH_VERSINFO[0]} ||
 	 ${BASH_VERSINFO[0]} -lt 5 ||
 	 ${BASH_VERSINFO[0]} -eq 5 && ${BASH_VERSINFO[1]} -lt 1 ||
 	 ${BASH_VERSINFO[0]} -eq 5 && ${BASH_VERSINFO[1]} -eq 1 && ${BASH_VERSINFO[2]} -lt 8 ]]; then
+
     echo "$0: ERROR: bash version needs to be >= 5.1.8: $BASH_VERSION" 1>&2
     echo "$0: Warning: bash version >= 4.2 might work but 5.1.8 was the minimum we tested" 1>&2
     echo "$0: Notice: For macOS users: install homebrew (see https://brew.sh)," \
-	 "then install homebrew bash, and then modify your \$PATH so that \"#!/usr/bin/env bash\"" \
+	 "then install homebrew bash (brew install bash), and then modify your \$PATH so that \"#!/usr/bin/env bash\"" \
 	 "finds the homebrew installed (usually /opt/homebrew/bin/bash) version of bash" 1>&2
     exit 4
 fi

bin/status2html.sh

@@ -43,7 +43,7 @@
 # often use it "version 5.2.26(1)-release" or later, and the RHEL Linux bash we
 # use often use is "version 5.1.8(1)-release" or later.  These versions are what
 # we initially tested.  We recommend you either upgrade bash or install a newer
-# version of bash and adjust your $PATH so that "/usr/bin/env bash" finds a basj
+# version of bash and adjust your $PATH so that "/usr/bin/env bash" finds a bash
 # that is version 5.1.8 or later.
 #
 # NOTE: The macOS shipped, as of 2024 March 15, a version of bash is something like
@@ -52,21 +52,22 @@
 #	(see https://brew.sh), and then install homebrew bash (/opt/homebrew/bin/bash),
 #	and then arrange your $PATH so that "/opt/homebrew/bin" is ahead of "/bin".
 #
-# NOTE: And while macports might work, we noticed a number of subtle differences
+# NOTE: And while MacPorts might work, we noticed a number of subtle differences
 #	with some of their ported tools to suggest you might be better off
 #	with installing homebrew (see https://brew.sh).  No disrespect is intended
-#	to the macports team as they do a commendable job.  Nevertheless we ran
-#	into enough differences with macports environments to suggest you
+#	to the MacPorts team as they do a commendable job.  Nevertheless we ran
+#	into enough differences with MacPorts environments to suggest you
 #	might find a better experience with this tool under homebrew instead.
 #
 if [[ -z ${BASH_VERSINFO[0]} ||
 	 ${BASH_VERSINFO[0]} -lt 5 ||
 	 ${BASH_VERSINFO[0]} -eq 5 && ${BASH_VERSINFO[1]} -lt 1 ||
 	 ${BASH_VERSINFO[0]} -eq 5 && ${BASH_VERSINFO[1]} -eq 1 && ${BASH_VERSINFO[2]} -lt 8 ]]; then
+
     echo "$0: ERROR: bash version needs to be >= 5.1.8: $BASH_VERSION" 1>&2
     echo "$0: Warning: bash version >= 4.2 might work but 5.1.8 was the minimum we tested" 1>&2
     echo "$0: Notice: For macOS users: install homebrew (see https://brew.sh)," \
-	 "then install homebrew bash, and then modify your \$PATH so that \"#!/usr/bin/env bash\"" \
+	 "then install homebrew bash (brew install bash), and then modify your \$PATH so that \"#!/usr/bin/env bash\"" \
 	 "finds the homebrew installed (usually /opt/homebrew/bin/bash) version of bash" 1>&2
     exit 4
 fi

bin/subst.default.sh

@@ -48,7 +48,7 @@
 # often use it "version 5.2.26(1)-release" or later, and the RHEL Linux bash we
 # use often use is "version 5.1.8(1)-release" or later.  These versions are what
 # we initially tested.  We recommend you either upgrade bash or install a newer
-# version of bash and adjust your $PATH so that "/usr/bin/env bash" finds a basj
+# version of bash and adjust your $PATH so that "/usr/bin/env bash" finds a bash
 # that is version 5.1.8 or later.
 #
 # NOTE: The macOS shipped, as of 2024 March 15, a version of bash is something like
@@ -57,21 +57,22 @@
 #	(see https://brew.sh), and then install homebrew bash (/opt/homebrew/bin/bash),
 #	and then arrange your $PATH so that "/opt/homebrew/bin" is ahead of "/bin".
 #
-# NOTE: And while macports might work, we noticed a number of subtle differences
+# NOTE: And while MacPorts might work, we noticed a number of subtle differences
 #	with some of their ported tools to suggest you might be better off
 #	with installing homebrew (see https://brew.sh).  No disrespect is intended
-#	to the macports team as they do a commendable job.  Nevertheless we ran
-#	into enough differences with macports environments to suggest you
+#	to the MacPorts team as they do a commendable job.  Nevertheless we ran
+#	into enough differences with MacPorts environments to suggest you
 #	might find a better experience with this tool under homebrew instead.
 #
 if [[ -z ${BASH_VERSINFO[0]} ||
 	 ${BASH_VERSINFO[0]} -lt 5 ||
 	 ${BASH_VERSINFO[0]} -eq 5 && ${BASH_VERSINFO[1]} -lt 1 ||
 	 ${BASH_VERSINFO[0]} -eq 5 && ${BASH_VERSINFO[1]} -eq 1 && ${BASH_VERSINFO[2]} -lt 8 ]]; then
+
     echo "$0: ERROR: bash version needs to be >= 5.1.8: $BASH_VERSION" 1>&2
     echo "$0: Warning: bash version >= 4.2 might work but 5.1.8 was the minimum we tested" 1>&2
     echo "$0: Notice: For macOS users: install homebrew (see https://brew.sh)," \
-	 "then install homebrew bash, and then modify your \$PATH so that \"#!/usr/bin/env bash\"" \
+	 "then install homebrew bash (brew install bash), and then modify your \$PATH so that \"#!/usr/bin/env bash\"" \
 	 "finds the homebrew installed (usually /opt/homebrew/bin/bash) version of bash" 1>&2
     exit 4
 fi

bin/subst.entry-index.sh

@@ -48,7 +48,7 @@
 # often use it "version 5.2.26(1)-release" or later, and the RHEL Linux bash we
 # use often use is "version 5.1.8(1)-release" or later.  These versions are what
 # we initially tested.  We recommend you either upgrade bash or install a newer
-# version of bash and adjust your $PATH so that "/usr/bin/env bash" finds a basj
+# version of bash and adjust your $PATH so that "/usr/bin/env bash" finds a bash
 # that is version 5.1.8 or later.
 #
 # NOTE: The macOS shipped, as of 2024 March 15, a version of bash is something like
@@ -57,21 +57,22 @@
 #	(see https://brew.sh), and then install homebrew bash (/opt/homebrew/bin/bash),
 #	and then arrange your $PATH so that "/opt/homebrew/bin" is ahead of "/bin".
 #
-# NOTE: And while macports might work, we noticed a number of subtle differences
+# NOTE: And while MacPorts might work, we noticed a number of subtle differences
 #	with some of their ported tools to suggest you might be better off
 #	with installing homebrew (see https://brew.sh).  No disrespect is intended
-#	to the macports team as they do a commendable job.  Nevertheless we ran
-#	into enough differences with macports environments to suggest you
+#	to the MacPorts team as they do a commendable job.  Nevertheless we ran
+#	into enough differences with MacPorts environments to suggest you
 #	might find a better experience with this tool under homebrew instead.
 #
 if [[ -z ${BASH_VERSINFO[0]} ||
 	 ${BASH_VERSINFO[0]} -lt 5 ||
 	 ${BASH_VERSINFO[0]} -eq 5 && ${BASH_VERSINFO[1]} -lt 1 ||
 	 ${BASH_VERSINFO[0]} -eq 5 && ${BASH_VERSINFO[1]} -eq 1 && ${BASH_VERSINFO[2]} -lt 8 ]]; then
+
     echo "$0: ERROR: bash version needs to be >= 5.1.8: $BASH_VERSION" 1>&2
     echo "$0: Warning: bash version >= 4.2 might work but 5.1.8 was the minimum we tested" 1>&2
     echo "$0: Notice: For macOS users: install homebrew (see https://brew.sh)," \
-	 "then install homebrew bash, and then modify your \$PATH so that \"#!/usr/bin/env bash\"" \
+	 "then install homebrew bash (brew install bash), and then modify your \$PATH so that \"#!/usr/bin/env bash\"" \
 	 "finds the homebrew installed (usually /opt/homebrew/bin/bash) version of bash" 1>&2
     exit 4
 fi

bin/subst.year-index.sh

@@ -48,7 +48,7 @@
 # often use it "version 5.2.26(1)-release" or later, and the RHEL Linux bash we
 # use often use is "version 5.1.8(1)-release" or later.  These versions are what
 # we initially tested.  We recommend you either upgrade bash or install a newer
-# version of bash and adjust your $PATH so that "/usr/bin/env bash" finds a basj
+# version of bash and adjust your $PATH so that "/usr/bin/env bash" finds a bash
 # that is version 5.1.8 or later.
 #
 # NOTE: The macOS shipped, as of 2024 March 15, a version of bash is something like
@@ -57,21 +57,22 @@
 #	(see https://brew.sh), and then install homebrew bash (/opt/homebrew/bin/bash),
 #	and then arrange your $PATH so that "/opt/homebrew/bin" is ahead of "/bin".
 #
-# NOTE: And while macports might work, we noticed a number of subtle differences
+# NOTE: And while MacPorts might work, we noticed a number of subtle differences
 #	with some of their ported tools to suggest you might be better off
 #	with installing homebrew (see https://brew.sh).  No disrespect is intended
-#	to the macports team as they do a commendable job.  Nevertheless we ran
-#	into enough differences with macports environments to suggest you
+#	to the MacPorts team as they do a commendable job.  Nevertheless we ran
+#	into enough differences with MacPorts environments to suggest you
 #	might find a better experience with this tool under homebrew instead.
 #
 if [[ -z ${BASH_VERSINFO[0]} ||
 	 ${BASH_VERSINFO[0]} -lt 5 ||
 	 ${BASH_VERSINFO[0]} -eq 5 && ${BASH_VERSINFO[1]} -lt 1 ||
 	 ${BASH_VERSINFO[0]} -eq 5 && ${BASH_VERSINFO[1]} -eq 1 && ${BASH_VERSINFO[2]} -lt 8 ]]; then
+
     echo "$0: ERROR: bash version needs to be >= 5.1.8: $BASH_VERSION" 1>&2
     echo "$0: Warning: bash version >= 4.2 might work but 5.1.8 was the minimum we tested" 1>&2
     echo "$0: Notice: For macOS users: install homebrew (see https://brew.sh)," \
-	 "then install homebrew bash, and then modify your \$PATH so that \"#!/usr/bin/env bash\"" \
+	 "then install homebrew bash (brew install bash), and then modify your \$PATH so that \"#!/usr/bin/env bash\"" \
 	 "finds the homebrew installed (usually /opt/homebrew/bin/bash) version of bash" 1>&2
     exit 4
 fi

bin/tar-all.sh

@@ -39,7 +39,7 @@
 # often use it "version 5.2.26(1)-release" or later, and the RHEL Linux bash we
 # use often use is "version 5.1.8(1)-release" or later.  These versions are what
 # we initially tested.  We recommend you either upgrade bash or install a newer
-# version of bash and adjust your $PATH so that "/usr/bin/env bash" finds a basj
+# version of bash and adjust your $PATH so that "/usr/bin/env bash" finds a bash
 # that is version 5.1.8 or later.
 #
 # NOTE: The macOS shipped, as of 2024 March 15, a version of bash is something like
@@ -48,21 +48,22 @@
 #	(see https://brew.sh), and then install homebrew bash (/opt/homebrew/bin/bash),
 #	and then arrange your $PATH so that "/opt/homebrew/bin" is ahead of "/bin".
 #
-# NOTE: And while macports might work, we noticed a number of subtle differences
+# NOTE: And while MacPorts might work, we noticed a number of subtle differences
 #	with some of their ported tools to suggest you might be better off
 #	with installing homebrew (see https://brew.sh).  No disrespect is intended
-#	to the macports team as they do a commendable job.  Nevertheless we ran
-#	into enough differences with macports environments to suggest you
+#	to the MacPorts team as they do a commendable job.  Nevertheless we ran
+#	into enough differences with MacPorts environments to suggest you
 #	might find a better experience with this tool under homebrew instead.
 #
 if [[ -z ${BASH_VERSINFO[0]} ||
 	 ${BASH_VERSINFO[0]} -lt 5 ||
 	 ${BASH_VERSINFO[0]} -eq 5 && ${BASH_VERSINFO[1]} -lt 1 ||
 	 ${BASH_VERSINFO[0]} -eq 5 && ${BASH_VERSINFO[1]} -eq 1 && ${BASH_VERSINFO[2]} -lt 8 ]]; then
+
     echo "$0: ERROR: bash version needs to be >= 5.1.8: $BASH_VERSION" 1>&2
     echo "$0: Warning: bash version >= 4.2 might work but 5.1.8 was the minimum we tested" 1>&2
     echo "$0: Notice: For macOS users: install homebrew (see https://brew.sh)," \
-	 "then install homebrew bash, and then modify your \$PATH so that \"#!/usr/bin/env bash\"" \
+	 "then install homebrew bash (brew install bash), and then modify your \$PATH so that \"#!/usr/bin/env bash\"" \
 	 "finds the homebrew installed (usually /opt/homebrew/bin/bash) version of bash" 1>&2
     exit 4
 fi

bin/tar-entry.sh

@@ -39,7 +39,7 @@
 # often use it "version 5.2.26(1)-release" or later, and the RHEL Linux bash we
 # use often use is "version 5.1.8(1)-release" or later.  These versions are what
 # we initially tested.  We recommend you either upgrade bash or install a newer
-# version of bash and adjust your $PATH so that "/usr/bin/env bash" finds a basj
+# version of bash and adjust your $PATH so that "/usr/bin/env bash" finds a bash
 # that is version 5.1.8 or later.
 #
 # NOTE: The macOS shipped, as of 2024 March 15, a version of bash is something like
@@ -48,21 +48,22 @@
 #	(see https://brew.sh), and then install homebrew bash (/opt/homebrew/bin/bash),
 #	and then arrange your $PATH so that "/opt/homebrew/bin" is ahead of "/bin".
 #
-# NOTE: And while macports might work, we noticed a number of subtle differences
+# NOTE: And while MacPorts might work, we noticed a number of subtle differences
 #	with some of their ported tools to suggest you might be better off
 #	with installing homebrew (see https://brew.sh).  No disrespect is intended
-#	to the macports team as they do a commendable job.  Nevertheless we ran
-#	into enough differences with macports environments to suggest you
+#	to the MacPorts team as they do a commendable job.  Nevertheless we ran
+#	into enough differences with MacPorts environments to suggest you
 #	might find a better experience with this tool under homebrew instead.
 #
 if [[ -z ${BASH_VERSINFO[0]} ||
 	 ${BASH_VERSINFO[0]} -lt 5 ||
 	 ${BASH_VERSINFO[0]} -eq 5 && ${BASH_VERSINFO[1]} -lt 1 ||
 	 ${BASH_VERSINFO[0]} -eq 5 && ${BASH_VERSINFO[1]} -eq 1 && ${BASH_VERSINFO[2]} -lt 8 ]]; then
+
     echo "$0: ERROR: bash version needs to be >= 5.1.8: $BASH_VERSION" 1>&2
     echo "$0: Warning: bash version >= 4.2 might work but 5.1.8 was the minimum we tested" 1>&2
     echo "$0: Notice: For macOS users: install homebrew (see https://brew.sh)," \
-	 "then install homebrew bash, and then modify your \$PATH so that \"#!/usr/bin/env bash\"" \
+	 "then install homebrew bash (brew install bash), and then modify your \$PATH so that \"#!/usr/bin/env bash\"" \
 	 "finds the homebrew installed (usually /opt/homebrew/bin/bash) version of bash" 1>&2
     exit 4
 fi

bin/tar-year.sh

@@ -39,7 +39,7 @@
 # often use it "version 5.2.26(1)-release" or later, and the RHEL Linux bash we
 # use often use is "version 5.1.8(1)-release" or later.  These versions are what
 # we initially tested.  We recommend you either upgrade bash or install a newer
-# version of bash and adjust your $PATH so that "/usr/bin/env bash" finds a basj
+# version of bash and adjust your $PATH so that "/usr/bin/env bash" finds a bash
 # that is version 5.1.8 or later.
 #
 # NOTE: The macOS shipped, as of 2024 March 15, a version of bash is something like
@@ -48,21 +48,22 @@
 #	(see https://brew.sh), and then install homebrew bash (/opt/homebrew/bin/bash),
 #	and then arrange your $PATH so that "/opt/homebrew/bin" is ahead of "/bin".
 #
-# NOTE: And while macports might work, we noticed a number of subtle differences
+# NOTE: And while MacPorts might work, we noticed a number of subtle differences
 #	with some of their ported tools to suggest you might be better off
 #	with installing homebrew (see https://brew.sh).  No disrespect is intended
-#	to the macports team as they do a commendable job.  Nevertheless we ran
-#	into enough differences with macports environments to suggest you
+#	to the MacPorts team as they do a commendable job.  Nevertheless we ran
+#	into enough differences with MacPorts environments to suggest you
 #	might find a better experience with this tool under homebrew instead.
 #
 if [[ -z ${BASH_VERSINFO[0]} ||
 	 ${BASH_VERSINFO[0]} -lt 5 ||
 	 ${BASH_VERSINFO[0]} -eq 5 && ${BASH_VERSINFO[1]} -lt 1 ||
 	 ${BASH_VERSINFO[0]} -eq 5 && ${BASH_VERSINFO[1]} -eq 1 && ${BASH_VERSINFO[2]} -lt 8 ]]; then
+
     echo "$0: ERROR: bash version needs to be >= 5.1.8: $BASH_VERSION" 1>&2
     echo "$0: Warning: bash version >= 4.2 might work but 5.1.8 was the minimum we tested" 1>&2
     echo "$0: Notice: For macOS users: install homebrew (see https://brew.sh)," \
-	 "then install homebrew bash, and then modify your \$PATH so that \"#!/usr/bin/env bash\"" \
+	 "then install homebrew bash (brew install bash), and then modify your \$PATH so that \"#!/usr/bin/env bash\"" \
 	 "finds the homebrew installed (usually /opt/homebrew/bin/bash) version of bash" 1>&2
     exit 4
 fi