While not strictly necessary, replacing the two ASCII tab characters
in the markdown copyright comment makes it easier to detect problematic
TAB indentation within markdown files.
After this commit, only 90 markdown files have leading ASCII TAB
characters. And again, while not strictly necessary, we can consider
running expand on those 90 markdown files to see what effect that
might have on the HTML files they produce.
Replace leading ASCII TAB characters with multiples of 8 ASCII SPACE
characters (the default action of the `expand(1)` tool) might have
an negative effect on some HTML formatting where **hack-a-round**
formatting was attempted to fix broken indentation caused by
problematic ASCII TAB characters.
Think of this as a baseline for evaluating leading
TAB characters within markdown files.
TODO: Consider either using `expand(1)` to replace leading ASCII
TAB characters with multiples of 8 ASCII SPACE characters AND/OR
modifying the appropriate `bin` tool to convert leading ASCII TAB
characters into multiples of 8 ASCII SPACE characters.
We added a space between the markdown triple code mark
and language that was enclosed in HTML comments.
So a line of the form:
````
```<!---c--->
````
became:
````
``` <!---c--->
````
This was done to **help** some code see that the HTML comment
string was not a markdown code specifier. Not all code
understands this after this changed. For example, `pandoc(1)`
still forms HTML classes of the form "<!---c-->"
when it encounters the above mentioned change.
We also fixed a problem with `2019/dogon/README.md` regarding
a markdown code block.
We also fixed a problem with `2020/yang/README.md` regarding
a markdown code block.
When language is specified in a markdown code block such as:
````
```c
printf("Hello, world!\n");
```
````
is used, the resulting HTML as produced by `pandoc(1)` combined
with our revised `ioccc.css` is not intent the code block well.
A temporary "_hack-a-round_" is to turn the "markdown code language
specifier" into an HTML comment. For example:
````
```<!---c-->
printf("Hello, world!\n");
```
````
This commits turns off existing markdown code language specifiers
for now, while preserving our ability to restore them in the future
when a better "_hack-a-round_" to the "markdown code language
specifier" problem is found.
The HTML impact if this "_hack-a-round_" is to produce HTML that
looks like this:
```
<pre class="<!---c-->"><code> .. </code></pre>
```
We might be able to create a complex set of classes for each markdown
code language (there won't be very many) in `ioccc.css`, or we might
find a more general CSS (or maybe `pandoc(1)`?) solution.
For now, this hack-a-round will have to do.
All code blocks in markdown have been intended by at least 4 spaces.
We add `--tab-stop=8` to all `pandoc(1)` executions in order to set
a better tab stop indentation, especially for tab intended code blocks.
Changed `bin/pandoc-wrapper.sh` VERSION from "1.5.3 2024-03-26"
to "1.6 2024-03-31".
Fixed `1991/brnstnd/sorta.README.md` so that the sorta code
is code blocks.
Removed unneeded paragraph group in copyright in `inc/footer.default.html`.
Fixed excess whitespace after list Author on entry `index.html` page.
Changed `bin/output-index-author.sh` VERSION from "1.5.2 2024-03-26"
to "1.6 2024-03-31".
Performed `make www` to perform the above and test under macOS.
TODO: Fix the problem of the initial line of code being extra intended.
TODO: Fix excess whitespace around code that is inline.
The inc/footer.default.html now has a common Copyright and CC BY-SA
4.0 License section for all generated HTML files.
All markdown files have a similar Copyright and CC
at the bottom in the form of an HTML comment.
As requested on GitHub: a tool that will be written, readme2index, will,
as explained:
'... will take the converted HTML from the README.md markdown and
inject it into an HTML template. Things such title, award one and
author information will be injected into the HTML page ahead of the
HTML that was converted from the README.md markdown. Without going
into details of HOW at this time, the result will be a coherent HTML
index.html page with the winner title / award, winning author
information, and important file links come from other sources and
NOT from the README.md file.
The text from the 1st award line, thru the authorship information,
and up to but not including the "## To build:" line in the README.md
file will just get in the way. Moreover authors might be tempted to
try and maintain that top of README.md text instead of working with
the author/_author_handle_.json and winner .winner.json files.
This was done with my[0] sgit(1) (https://github.com/xexyl/sgit) tool like:
sgit -o -n -e '/^## To build:/,$p' '[12][0-9][0-9][0-9]/*/README.md'
[0] Is that shameless self-promotion? I don't know but I don't care: it
is generally a very useful tool and has been used in other repos too.
Besides, I've done it many times before and it's a great example that I
will be adding to the README.md file of the tool, one I hadn't thought
of doing.
As main() used K&R style I changed main() to use K&R. The function that
it became (to fix it), pain(), already has the same exact format of what
main() once was only named painfully. Since main() also had the function
on many lines, even just the return statement in the beginning, I did
this in main() but given that main() only calls pain() obviously this is
not perfect. This has been documented in the thanks file like for all
the other improvements, to keep track of it.
Format/typo check README.md.
NOTE: this is just one way to fix the problem described below but it can
be modified - perhaps greatly changed - or rejected and done
differently. That being said it does isolate the entries that can be
modified except for the one by Simon Cooper as I had intended to do all
entries before a commit but I am too tired to continue and there are
more important things to be done for the IOCCC (hopefully later today).
I don't mind but I wanted to save Landon some of the work as I started
the problem even though all with good intention after Landon noted he
wanted to thank those in the README.md files.
First I would like to also apologise to any previous winners if there
was upset or concern; this was all done with the best intentions and I
know that it was a fine line but the judges' goal is to make it so
previous entries do work in modern systems so that everyone can enjoy
them. Still I am sorry if I caused any offence or anything else! I
actually agree with the situation and I had been wondering about how to
go about it too. Now for the rationale behind this update.
A couple previous winners have voiced concern about the way the thank
you notes are displayed in the README.md files I have started the work
to save Landon some of the trouble as although it was with good
intentions (and based on the note that Landon wanted to thank those who
fixed an entry) I started the problem so it seems only right that I help
rectify it. I also agree with the problem and had thought of it before,
even thinking that in some entries it needs not have any reference to
anyone but the winner! This commit has removed the thank you notes from
several entries and added a THANKS.md file.
The THANKS.md file has the rest of the entries that were fixed as well
which should if nothing else help isolate the entries that need to be
modified. Some entries actually referred to me but were not a thank you
note due to a fix; some were from winners themselves for instance.
Note that I did not update the bugs.md file or any other file that might
refer to these things in the README.md files. The bugs.md for instance
refers to adding credits to those who fix problems or provide missing
links or files to the respective README.md files and this will have to
change once the way this is done is finalised. But hopefully this is a
help to Landon so that he may also focus on the important jprint tool in
the mkiocccentry repo.
This was done quite easily with a bit of thought. I generated a script
that could be modified in vim if necessary (as it turned out to be
though some of it could have been generated too but I did not think of
everything at once and it is a hack).
This is how I generated it:
echo '#!/bin/bash' > bin/check_awards.sh ; ( while read -r g ; do echo grep "$g"; done < <(sed -e 's,_,/,g' -e 's/"/\\"/g' tmp/year-auth-prize.csv | awk -F, '{print grep "\x22" $2 "\x22" " " $1 "/" "README.md"}' ); ) >> bin/check_awards.sh
Then I I modified the file (again this was a hack to make it easier and
quicker and better for being tired too) in vim to make the grep use -Hc
so I could pipe it to 'grep :0'. This found the files without the right
award. So the final command was:
sh bin/check_awards.sh |grep :0
though I did have to edit some files several times.
For reference the script has been added to the repo too but with +x
permissions.
This change also required updating the CSV file in tmp/.
The type of the second and third arg of main() were not char ** which
caused clang to have a fit. In gcc this is not a problem but it printed
gibberish nonetheless.
Changing the type of the second and third arg to compile with clang and
it printed the same (or similar?) gibberish as it did with gcc.
Adding a new function (pain() as it's annoying that clang requires
second, third and fourth args to main() to be 'char **'s even though in
this case it didn't work anyway) and calling it from main with the
appropriate args fixes the problem.
For 1988/dale it will not compile under macOS. I was able to get it to
almost compile under macOS but there was one problem. As well this 'fix'
will make it not compile under linux. One change was required which was
changing the #define _ define followed by #_ foo to be just '#define
foo' etc.
Added to 1988/isaak/.gitignore isaak.output.
1988/spinellis won't compile with clang.
1988/phillipps will compile but it is likely to segfault at least in
some systems (maybe not all).
Updated many README.md files for the changes above (and probably other
changes I've neglected to write in this log). Most changes in the readme
files are probably just formatting and probably typos as well as how to
compile and run entries nowadays. There might have been other changes.
There is one exception:
$ find . -name '*.hint' -execdir git mv '{}' README.md \;
git statufatal: destination exists, source=1992/albert/albert.hint, destination=1992/albert/README.md
Looking at the two files they differ quite a bit so I've not changed it.
I'll bring this up on GitHub.
Landon Curt Noll