Amongst the changes here is that we do not need to have the hex or html
code (numbers) for open and close parentheses (in links) as there are
names. '(' is & followed by lpar; and the ')' is the same but 'rpar;'
instead. This makes it easier to remember and type and it generates the
same html as well (they are all valid). Now the markdown files are
consistent in this (in some cases hex was used and in others the html
code).
Although many markdown files were updated no html files needed to be
updated as it generates the same html. Even so I ran the appropriate
rules to do so just to verify this.
We move `tmp/format-headers.sh` into `bin/format-headers.sh`.
We also add a few missing empty lines to `README.md`.
We add `bin/format-headers.sh` to the `bin/README.md`.
We run `bin/format-headers.sh` to perform the above.
Performed `make www` to accomplish the above and to test under macOS.
Instead of code blocks the bug / (mis)features statuses are quoted
rather than in a code block. In the case that there is more than one a
line break was added at the end of all but the last one.
A bug status was renamed to be slightly more correct (maybe more than
one was renamed for the same purpose but at least one was).
The bug statuses in the quotes are now bold to let them stand out
better.
Given how problematic leading tabs in markdown files can be,
we have expanded all leading tabs in markdown files by:
```sh
find * -type f -name '*.md' -print |
while read -r file; do
rm -f "$file.tmp" ;
expand < "$file" > "$file.tmp" ;
mv -f -v "$file.tmp" "$file" ;
done
```
Given the previous changes to `bin/pandoc-wrapper.sh` and other recent
commits and recent pull requests, the were were **NO** changes to
any HTML files. This is a **good thing** as the expression goes.
No there are no leading tabs in any markdown files.
A check to catch any re-introduction of leading tabs
into any markdown file is on the way.
BTW: We do not have anything against leading tabs in files,
even though we have had to deal with their impact on forming
HTML from markdown files (as well as the calc source code).
It is just that this is one of those cases where tabs conflict
(sometimes caused by people wanting to change the classic
8-space tab model) with a desired outcome.
Perform `make www` to perform the above and test under macOS.
While not strictly necessary, replacing the two ASCII tab characters
in the markdown copyright comment makes it easier to detect problematic
TAB indentation within markdown files.
After this commit, only 90 markdown files have leading ASCII TAB
characters. And again, while not strictly necessary, we can consider
running expand on those 90 markdown files to see what effect that
might have on the HTML files they produce.
Replace leading ASCII TAB characters with multiples of 8 ASCII SPACE
characters (the default action of the `expand(1)` tool) might have
an negative effect on some HTML formatting where **hack-a-round**
formatting was attempted to fix broken indentation caused by
problematic ASCII TAB characters.
Think of this as a baseline for evaluating leading
TAB characters within markdown files.
TODO: Consider either using `expand(1)` to replace leading ASCII
TAB characters with multiples of 8 ASCII SPACE characters AND/OR
modifying the appropriate `bin` tool to convert leading ASCII TAB
characters into multiples of 8 ASCII SPACE characters.
We fix more markdown links in markdown files that refer to files
internally to the web site.
Added tmp tools to find and print various markdown links:
* `tmp/md-links.sh` - print all markdown links
* `tmp/md-token-links.sh` - print all markdown links that start with a **%%TOKEN%%**
* `tmp/md-local-links.sh` - print all markdown links to a local file
* `tmp/md-link-paths.sh` - print local file paths referenced in markdown links
Fixed a number of markdown formatting problems with `thanks-for-help.md`.
Fixed markdown links to files in `thanks-for-help.md`. Improved
heading levels in `thanks-for-help.md`, and made entry sections consistent.
Changed all markdown links that end in "))" to end in a better way.
Explained in `markdown.md` why we are avoiding markdown links that
end in "))".
Ran `make www` to perform the above.
TODO: Fix stuff we broke by mistake doing the above.
TODO: Fix more broken markdown links.
In cases that are **outside of a markdown code block**,
a markdown line with ending in a tailing "\" can generate
problematic HTML.
We certain trailing backslashes outside of a markdown code block
with "<br>" HTML elements, or in some cases eliminated the
need for a trailing backslash.
In a few cases some unnecessary trailing backslashes inside
of a markdown code block were removed.
The following markdown files were changed in this commit:
```
1990/dds/README.md
1990/jaw/README.md
1991/ant/README.md
1991/rince/README.md
1991/westley/README.md
1992/vern/README.md
1992/westley/README.md
1998/schweikh1/README.md
2004/anonymous/README.md
2005/sykes/README.md
2006/toledo2/README.md
2011/toledo/README.md
2012/endoh2/README.md
2012/tromp/README.md
2013/robison/README.md
2015/hou/README.md
2015/howe/README.md
2015/schweikhardt/README.md
2018/burton1/README.md
2018/burton2/README.md
2018/ferguson/README.md
2018/vokes/README.md
2020/ferguson1/README.md
```
Performed `make www` to test these changes.
We added a space between the markdown triple code mark
and language that was enclosed in HTML comments.
So a line of the form:
````
```<!---c--->
````
became:
````
``` <!---c--->
````
This was done to **help** some code see that the HTML comment
string was not a markdown code specifier. Not all code
understands this after this changed. For example, `pandoc(1)`
still forms HTML classes of the form "<!---c-->"
when it encounters the above mentioned change.
We also fixed a problem with `2019/dogon/README.md` regarding
a markdown code block.
We also fixed a problem with `2020/yang/README.md` regarding
a markdown code block.
When language is specified in a markdown code block such as:
````
```c
printf("Hello, world!\n");
```
````
is used, the resulting HTML as produced by `pandoc(1)` combined
with our revised `ioccc.css` is not intent the code block well.
A temporary "_hack-a-round_" is to turn the "markdown code language
specifier" into an HTML comment. For example:
````
```<!---c-->
printf("Hello, world!\n");
```
````
This commits turns off existing markdown code language specifiers
for now, while preserving our ability to restore them in the future
when a better "_hack-a-round_" to the "markdown code language
specifier" problem is found.
The HTML impact if this "_hack-a-round_" is to produce HTML that
looks like this:
```
<pre class="<!---c-->"><code> .. </code></pre>
```
We might be able to create a complex set of classes for each markdown
code language (there won't be very many) in `ioccc.css`, or we might
find a more general CSS (or maybe `pandoc(1)`?) solution.
For now, this hack-a-round will have to do.
All code blocks in markdown have been intended by at least 4 spaces.
We add `--tab-stop=8` to all `pandoc(1)` executions in order to set
a better tab stop indentation, especially for tab intended code blocks.
Changed `bin/pandoc-wrapper.sh` VERSION from "1.5.3 2024-03-26"
to "1.6 2024-03-31".
Fixed `1991/brnstnd/sorta.README.md` so that the sorta code
is code blocks.
Removed unneeded paragraph group in copyright in `inc/footer.default.html`.
Fixed excess whitespace after list Author on entry `index.html` page.
Changed `bin/output-index-author.sh` VERSION from "1.5.2 2024-03-26"
to "1.6 2024-03-31".
Performed `make www` to perform the above and test under macOS.
TODO: Fix the problem of the initial line of code being extra intended.
TODO: Fix excess whitespace around code that is inline.
The inc/footer.default.html now has a common Copyright and CC BY-SA
4.0 License section for all generated HTML files.
All markdown files have a similar Copyright and CC
at the bottom in the form of an HTML comment.
The script had "s surrounding the git ls-files command which turned it
to a single file which of course is wrong.
Ran script again fixing many README.md files that had incorrect number
of blank lines for critical headers.
This will have to be done a final but a good number of files have been
corrected.
As requested on GitHub: a tool that will be written, readme2index, will,
as explained:
'... will take the converted HTML from the README.md markdown and
inject it into an HTML template. Things such title, award one and
author information will be injected into the HTML page ahead of the
HTML that was converted from the README.md markdown. Without going
into details of HOW at this time, the result will be a coherent HTML
index.html page with the winner title / award, winning author
information, and important file links come from other sources and
NOT from the README.md file.
The text from the 1st award line, thru the authorship information,
and up to but not including the "## To build:" line in the README.md
file will just get in the way. Moreover authors might be tempted to
try and maintain that top of README.md text instead of working with
the author/_author_handle_.json and winner .winner.json files.
This was done with my[0] sgit(1) (https://github.com/xexyl/sgit) tool like:
sgit -o -n -e '/^## To build:/,$p' '[12][0-9][0-9][0-9]/*/README.md'
[0] Is that shameless self-promotion? I don't know but I don't care: it
is generally a very useful tool and has been used in other repos too.
Besides, I've done it many times before and it's a great example that I
will be adding to the README.md file of the tool, one I hadn't thought
of doing.
This now lets the command in the judges' remarks:
echo "Quartz glyph jocks vend, fix, BMW." | compress | ./btoa | ./jaw
not report just:
oops
oops
and instead it outputs data which suggests, I believe, that the program
is not buggy but instead the script had to have the 'xbtoa' changed to
'btoa'.
Updated bugs.md and thanks-for-fixes.md and README.md file too.
Other changes were made to thanks file as they are more appropriate than
in the README.md (of 1990/theorem) after the (once again sounding like
a broken record) vastly superior idea of the thanks file came up. This
addition here is unintentional; it was just already there but not ready
for committing as 1990/theorem/README.md was not yet ready. That file
will be committed today.
Now the files added to the archive will be extracted. It is unfortunate
but a temporary tarball has to be formed rather than writing to stdout.
There is a possible fix to this but it hasn't been looked into yet. The
tarball is temporary, however, and is deleted after it is extracted. The
script MUST be run from a subdirectory of the entry but as the script
had hardcoded the paths before this shouldn't be that big of a deal.
Another problem was more to do with paths and also the script relying on
the exit code allowing for &&. Now it's ';' between most commands.
There still remains, Landon and I believe, a bug in the entry and this
has been added to the bugs.md file; the script not working has been
removed from the bugs.md.
The program (and the generated program made by shark.sh) no longer use
perror(3) and instead use fprintf(3) (writing to stderr). This is mostly
because in macOS errno == 0 looks like an error.
Some updates to the shark.sh script were also made.
The bug status has been updated as there is apparently another bug
though I was sure it was solved when I last looked at it. It happens
with and without the above updates. I'm unsure about other things too
but these are not in the bugs.md yet as I'm not even sure what to say
just yet.
Added try.sh script which does some of the commands. However as there is
that bug it doesn't do any comparisons - for now.
The entries referenced in `bugs.md` now have, below the
"To build:" section, a "Bugs and (Mis)features section text"
that matches the `bugs.md` status.
Several entries had their "STATUS" changed from:
"STATUS: INABIAF - please **DO NOT** fix" to:
"STATUS: known bug - please help us fix":
This was done because, while some of the bugs were minor,
inviting someone to try and fix the issue does nil harm.
In a few cases a more difficult bug was also changed to
the "please help us fix".
While we do NOT want to waste time fixing such entries NOW,
letting others become involved and to try to fix the entry
is a good thing as to encourages people to study the entry
and try to fix the entry. We don't need to accept a fix
that is offered, and of the fix transforms the source in
a less than desirable way, such a fix (if accepted) could
be become a alt source code.
The use of the markdown trailing whitespace to indicate
line break should NOT be done when the following line is empty.
This removes such improper use of whitespace in README.md files.
NOTE: this is just one way to fix the problem described below but it can
be modified - perhaps greatly changed - or rejected and done
differently. That being said it does isolate the entries that can be
modified except for the one by Simon Cooper as I had intended to do all
entries before a commit but I am too tired to continue and there are
more important things to be done for the IOCCC (hopefully later today).
I don't mind but I wanted to save Landon some of the work as I started
the problem even though all with good intention after Landon noted he
wanted to thank those in the README.md files.
First I would like to also apologise to any previous winners if there
was upset or concern; this was all done with the best intentions and I
know that it was a fine line but the judges' goal is to make it so
previous entries do work in modern systems so that everyone can enjoy
them. Still I am sorry if I caused any offence or anything else! I
actually agree with the situation and I had been wondering about how to
go about it too. Now for the rationale behind this update.
A couple previous winners have voiced concern about the way the thank
you notes are displayed in the README.md files I have started the work
to save Landon some of the trouble as although it was with good
intentions (and based on the note that Landon wanted to thank those who
fixed an entry) I started the problem so it seems only right that I help
rectify it. I also agree with the problem and had thought of it before,
even thinking that in some entries it needs not have any reference to
anyone but the winner! This commit has removed the thank you notes from
several entries and added a THANKS.md file.
The THANKS.md file has the rest of the entries that were fixed as well
which should if nothing else help isolate the entries that need to be
modified. Some entries actually referred to me but were not a thank you
note due to a fix; some were from winners themselves for instance.
Note that I did not update the bugs.md file or any other file that might
refer to these things in the README.md files. The bugs.md for instance
refers to adding credits to those who fix problems or provide missing
links or files to the respective README.md files and this will have to
change once the way this is done is finalised. But hopefully this is a
help to Landon so that he may also focus on the important jprint tool in
the mkiocccentry repo.
This to make the country code consistent with mkiocccentry (and I guess
international standard country codes).
This affects many README.md files and (for one line) winners.csv.
Removed this task from todo.md, changing it to refer to just make sure
all README.md files have been checked for typos.
I _believe_ this means 1990 has been checked for typos except for the
1990/README.md file itself.
Originally I had thought that a command in the commands to try did not
work in macOS. But I looked at the code a while back and it's only
because of the errno == 0 message in macOS and the fact the entry uses
perror(). I noted it's not a bug in bugs.md at the time but I did not
remove that part from the README.md (the part that says it doesn't
work).
There were many many README.md files with the wrong heading level for
different sections. These have been changed.
To help go through the changes it should be noted I used sgit and also
here is what is changed:
The 'Try', 'To build' and 'To run' lines have two '#'s. Some had one and
others had three.
An exception is that in 1984/anonymous/README.md for the alternative
code that had three '#'s. This is not consistent yet and it might be
that only two are desired. But for now that one at least has three.
The example commands in the judges' comments had some problems that gave
an error message when running them.
I have also figured out the apparent problem with macOS in the command
under the try section being:
echo "Quartz glyph jocks vend, fix, BMW." | compress | ./btoa | ./jaw
But it's not actually a problem. It uses perror() and under macOS with
errno == 0 it shows:
Undefined error: 0
whereas linux shows 'Success'. So it's not actually a problem with the
entry at all. In fact the condition that triggers that call is the same
in both linux and macOS.
I've updated bugs.md to note this and I also updated the README.md to
note it (and to refer to the bugs.md file for more details).
The thank you to me is because I missed it earlier on when I fixed the
scripts, simple though the fixes were.
In some files changed the formatting was fixed to be a proper markdown
file.
There were some typos including that some README.md files that linked to
/winners.html#Cody_Boone_Ferguson actually linked to the non-existent
file /years which obviously would not work.
I also added links to the rest of the places I have fixed entries (but
see below) and I did the same for Yusuke Endoh's fixes.
As well apparently one entry I thought he fixed to compile under modern
systems does not seem to so that entry will have to be revisited another
time. That entry was 1993/jonth.
Those are the main changes here if not all of them.
Although I previously got them to all compile they did not all work. Now
they do except that jaw does not work properly in macOS (I have noticed
something odd in linux too but it appears to work mostly if not
entirely).
Yusuke Endoh pointed out for 1990/theorem that atof() nowadays needs
include stdlib.h so this was added to the file. As well I added the
inclusion of string.h for strcmp(). I also fixed some segfaults in this
entry (even though the judges pointed out that for NULL pointer one
needs the four '0 0 0 0' it still segfaulted under those conditions) so
that everything should work now under both linux and macOS. There were
iirc two parts to this: one the NULL pointer is no longer dereferenced
but also the type being passed to strcmp() was a int * and not a char *.
This prevented 1990/theorem/sorter from working at all (segfault) and as
I recall it there was another segfault I encountered as well.
For 1990/jaw Yusuke Endoh provided a ruby implementation of btoa as it's
not always available in modern systems. Thank you Yusuke!
In 1990/jaw shark.sh had to be modified as well. This had to do with '.'
not being in the default PATH.
As well I had previously made a mistake about btoa versus atob as both
were referenced in 1990/jaw/README.md. I believe I have this correct
now.
Many if not all the README files were modified with various changes
including formatting (like turning them into markdown) and section
titles amongst other things.
I seem to recall I'm missing something here but I can't recall what I
recall :-) so this will have to suffice this time round (maybe it was
the btoa/atob issue that I just remembered and added above but I'm not
sure).
Added Makefiles for 1990 entries.
In a some cases the source code was modified.
Modified 1990 README.md files.
In some cases the program still cannot be compiled.
There is one exception:
$ find . -name '*.hint' -execdir git mv '{}' README.md \;
git statufatal: destination exists, source=1992/albert/albert.hint, destination=1992/albert/README.md
Looking at the two files they differ quite a bit so I've not changed it.
I'll bring this up on GitHub.
Cody Boone Ferguson