In the line in README.md and index.html files that said:
### NOTICE to those who wish for a greater challenge
I added a ':' at the end of the line.
There were some entries that had a link fix in the index.html file but I
only looked up through 1995/leo as those still have to have a 'look and
feel' check and it would just slow things down.
We add the following level-3 header to help people identify text
they may wish to skip if they wish for a greater challenge:
```
```
After that notice we add:
```
**If you want a greater challenge, don't read any further**:
just try to understand the program via the source.
If you get stuck, come back and read below for additional hints and information.
```
And sometimes follow with:
```
```
Or sometimes follow with:
```
```
Where the alt code impacts a "greater challenge", we add instead:
```
**If you want a greater challenge, don't read any further**:
just try to understand the program without looking at the Alternate code.
If you get stuck, come back and look at the Alternate code.
```
And where a given command impacts a "greater challenge", we add instead:
```
**If you want a greater challenge, don't read any further**:
just try to understand the program without running the command below.
If you get stuck, come back and run the following command:
```
Perform `make www` to perform the above and test under macOS.
In most cases the word was changed to 'obfuscation' as it was about
obfuscation, not deobfuscation. In some cases like 1995/leo since the
file was (in 1995/leo) about a secret switch it was changed to
'secret.md' (and 'secret.html') but there were others like that as well.
One entry had the words 'spoiling the size rule' but this had been
changed to 'deobfuscating the size rule' which was obviously wrong.
In the latter YYYY/README.md files the judges had written after some
entries (brief summaries) '...
...We'll stop spouting spoilers now. Have fun exploring all the
entries!
but that was changed to:
...We'll stop spouting deobfuscation information now. Have fun
exploring all the entries!
which wasn't really about deobfuscation but just a brief summary of what
the entries did.
And in the most problematic case (at least for me :-), 2018/ferguson) I
had put a joke in:
... but it's the only Easter egg I won't spoil
but it was changed to 'won't deobfuscate' which not only is not what it
is but it spoilt the joke.
In some cases the word was changed back to 'SPOILER' (or similar) but in
most cases not. I believe it should be better now. There are some
caveats, however, as below.
Although make find_missing_links is okay I do not remember if this will
catch links that refer to '%%REPO_URL%%' or other pandoc tokens. This
means I might have to go back to some earlier years to verify links are
okay. That should not take that much time I hope.
It might also be that some wording can still be improved some but it is
hoped this will be discovered when checking links and looking over the
manifest (which obviously changed).
While not strictly necessary, replacing the two ASCII tab characters
in the markdown copyright comment makes it easier to detect problematic
TAB indentation within markdown files.
After this commit, only 90 markdown files have leading ASCII TAB
characters. And again, while not strictly necessary, we can consider
running expand on those 90 markdown files to see what effect that
might have on the HTML files they produce.
Replace leading ASCII TAB characters with multiples of 8 ASCII SPACE
characters (the default action of the `expand(1)` tool) might have
an negative effect on some HTML formatting where **hack-a-round**
formatting was attempted to fix broken indentation caused by
problematic ASCII TAB characters.
Think of this as a baseline for evaluating leading
TAB characters within markdown files.
TODO: Consider either using `expand(1)` to replace leading ASCII
TAB characters with multiples of 8 ASCII SPACE characters AND/OR
modifying the appropriate `bin` tool to convert leading ASCII TAB
characters into multiples of 8 ASCII SPACE characters.
This was done by:
sgit -e 's/alt code/alternate code/g' . ; git co tmp/OLD_manifest
as well as updating the tmp/manifest.numbers spreadsheet and exporting
to the CSV file (though that would not strictly be necessary).
The way this works means that the update manifest script does not need
to be run as it sgit(1) touched the .entry.json files (any that needed
to be updated) and so would any index.html files. An example for both
.entry.json and index.html files being modified due to manifest is
2012/kang.
Numerous Makefiles were updated, any try scripts that had 'alt code'
instead of 'alternate code' and README.md/index.html files (unrelated to
the manifest as 'alt code' was used in other places too) and obviously
the manifest.numbers spreadsheet.
However to be safe I will do a run of the manifest script in a bit even
though it should not be necessary. If no commits are made it means all
is good and if any commits are made for the manifest it means that I
did not think of something (or else I made another change after this).
We added a space between the markdown triple code mark
and language that was enclosed in HTML comments.
So a line of the form:
````
```<!---c--->
````
became:
````
``` <!---c--->
````
This was done to **help** some code see that the HTML comment
string was not a markdown code specifier. Not all code
understands this after this changed. For example, `pandoc(1)`
still forms HTML classes of the form "<!---c-->"
when it encounters the above mentioned change.
We also fixed a problem with `2019/dogon/README.md` regarding
a markdown code block.
We also fixed a problem with `2020/yang/README.md` regarding
a markdown code block.
When language is specified in a markdown code block such as:
````
```c
printf("Hello, world!\n");
```
````
is used, the resulting HTML as produced by `pandoc(1)` combined
with our revised `ioccc.css` is not intent the code block well.
A temporary "_hack-a-round_" is to turn the "markdown code language
specifier" into an HTML comment. For example:
````
```<!---c-->
printf("Hello, world!\n");
```
````
This commits turns off existing markdown code language specifiers
for now, while preserving our ability to restore them in the future
when a better "_hack-a-round_" to the "markdown code language
specifier" problem is found.
The HTML impact if this "_hack-a-round_" is to produce HTML that
looks like this:
```
<pre class="<!---c-->"><code> .. </code></pre>
```
We might be able to create a complex set of classes for each markdown
code language (there won't be very many) in `ioccc.css`, or we might
find a more general CSS (or maybe `pandoc(1)`?) solution.
For now, this hack-a-round will have to do.
All code blocks in markdown have been intended by at least 4 spaces.
We add `--tab-stop=8` to all `pandoc(1)` executions in order to set
a better tab stop indentation, especially for tab intended code blocks.
Changed `bin/pandoc-wrapper.sh` VERSION from "1.5.3 2024-03-26"
to "1.6 2024-03-31".
Fixed `1991/brnstnd/sorta.README.md` so that the sorta code
is code blocks.
Removed unneeded paragraph group in copyright in `inc/footer.default.html`.
Fixed excess whitespace after list Author on entry `index.html` page.
Changed `bin/output-index-author.sh` VERSION from "1.5.2 2024-03-26"
to "1.6 2024-03-31".
Performed `make www` to perform the above and test under macOS.
TODO: Fix the problem of the initial line of code being extra intended.
TODO: Fix excess whitespace around code that is inline.
The inc/footer.default.html now has a common Copyright and CC BY-SA
4.0 License section for all generated HTML files.
All markdown files have a similar Copyright and CC
at the bottom in the form of an HTML comment.
The to build/original build, to use/original use and try/original try
sections have been changed in the README.md to be much more consistent
and clearer (and detailed in some ways).
The to run section (not the original run section as that one is not
supposed to be compilable and is not compilable either) has
'./westley.alt' now as that will give you a message even right after
running 'make clobber alt'.
The alt code was changed in that blank lines were removed and (as a
cosmetic change) the 'return 0;'s were changed to 'exit(0);'s.
Originally the idea was to have 'int main()' be 'main()' (like the
original in the #if 0..#else..#endif block) but this will
trigger -Wimplicit-int and since one would not want to run a more
complicated 'make' invocation (instead of a simple 'cc' invocation or at
least a simpler one) it means the output is messed up with a warning.
But using exit(0); is fine albeit with an additional #include.
The try.alt.sh script now has an -o westley.alt and instead of running
./a.out it runs ./westley.alt. This makes it more like normal 'make alt'
targets.
The Makefile all target now has information about the alt build as it
does not have the restrictions of column width, character tab length and
wraparound.
The .gitignore no longer has a.out in it.
As 1994/westley requires (for good display) 80 columns, 8 character tabs
and wraparound it makes it harder to run the entry to enjoy it with
modern systems. Also because it generates messages through error
messages (of the compiler line) different compilers will show it
differently and it can end up being harder to follow. The alt code uses
the same logic but instead of using #includes (of files that don't
exist) it uses printf(3). Everything else is the same.
The try.alt.sh is just like the try.sh but for the alt code.
Since the alt code is ideal for modern systems the original code is
suggested second. This can be changed of course.
The script now first checks columns (tput cols) and if it's not 80 it
will ask the user if they still wish to continue. Checking the tab
length of 8 and wraparound is probably not worth the effort. Also
unfortunately output is not as nice as it used to be because compilers
show more context with errors. Still having columns at 80 does improve
the output a fair bit.
As requested on GitHub: a tool that will be written, readme2index, will,
as explained:
'... will take the converted HTML from the README.md markdown and
inject it into an HTML template. Things such title, award one and
author information will be injected into the HTML page ahead of the
HTML that was converted from the README.md markdown. Without going
into details of HOW at this time, the result will be a coherent HTML
index.html page with the winner title / award, winning author
information, and important file links come from other sources and
NOT from the README.md file.
The text from the 1st award line, thru the authorship information,
and up to but not including the "## To build:" line in the README.md
file will just get in the way. Moreover authors might be tempted to
try and maintain that top of README.md text instead of working with
the author/_author_handle_.json and winner .winner.json files.
This was done with my[0] sgit(1) (https://github.com/xexyl/sgit) tool like:
sgit -o -n -e '/^## To build:/,$p' '[12][0-9][0-9][0-9]/*/README.md'
[0] Is that shameless self-promotion? I don't know but I don't care: it
is generally a very useful tool and has been used in other repos too.
Besides, I've done it many times before and it's a great example that I
will be adding to the README.md file of the tool, one I hadn't thought
of doing.
As in:
sgit -e 's/# To run/# To use/g' '*README.md'
This makes consistent the message for how to use the program. 'How to
use' was chosen because one can run a program just by doing './foo' but
that doesn't imply that's how to use it but the purpose of the section
is how to use it.
The use of the markdown trailing whitespace to indicate
line break should NOT be done when the following line is empty.
This removes such improper use of whitespace in README.md files.
The fix thank you's have been moved from `README.md` to
`thanks-for-fixes.md`.
**WARNING**: Some mistakes may have been made in doing this.
We presume later changes by others will correct any issues.
The `CONTRIBUTING.md` was renamed `how-to-enter.md`.
A 3rd line of links was added to top level html such as
`contact.html`, `index.html`, `judges.html`, `winners.html`,
and `years.html`.
Improved blank line use in a number (but not all) `README.md` files.
This to make the country code consistent with mkiocccentry (and I guess
international standard country codes).
This affects many README.md files and (for one line) winners.csv.
Format fixes in README.md.
Added note from author about terminal configuration from Brian at the
top of the README.md and the Makefile so that it's easier to see.
Using the spoiler section from Brian I converted it to compiler commands
(in the README.md) and made a spoiler.sh script to run them - to make it
easier to see the game in full for those who just want to see it and not
try it.
There were many many README.md files with the wrong heading level for
different sections. These have been changed.
To help go through the changes it should be noted I used sgit and also
here is what is changed:
The 'Try', 'To build' and 'To run' lines have two '#'s. Some had one and
others had three.
An exception is that in 1984/anonymous/README.md for the alternative
code that had three '#'s. This is not consistent yet and it might be
that only two are desired. But for now that one at least has three.
The main link was dead but looking at the Internet Wayback Machine I
found that he changed domains and it's still valid. One entry had a
different URL but with a quick check I could not determine that it had
anything to do with him so I changed it to his own domain (which I
verified is his).
The 2001/westley/.gitignore was also updated as it has other source
files that are generated by the commands in the try section.
These are mostly just formatting fixes but there might be some typos
here and there.
These years have not been checked thoroughly but I made fixes and want
them in for when I do work on them.
As far as the Makefiles go: notes were added that correspond to the
notes in the README.md files which is why I have put them in the same
commit.
There is one exception:
$ find . -name '*.hint' -execdir git mv '{}' README.md \;
git statufatal: destination exists, source=1992/albert/albert.hint, destination=1992/albert/README.md
Looking at the two files they differ quite a bit so I've not changed it.
I'll bring this up on GitHub.
Cody Boone Ferguson